Bureau Of Corrections Muntinlupa City Metro Manila Tender

Description Republic Of The Philippines Department Of Justice Bureau Of Corrections City Of Muntinlupa Request For Quotation #2021-083 Date:¬¬¬¬_________________ Name Of Company: _______________________________________________________________ Address: ________________________________________________________________________ Tin No.: ________________________________________________________________________ Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions As Stated Hereunder. A.) Bidders Shall Provide Correct And Accurate Information Required In This Form. B.) Bidders May Quote For All The Items. C.) Price Quotation/s Must Be Valid For A Period Of One Hundred Twenty (120) Calendar Days From The Date Of Submission. D.) Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. E.) Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. F.) Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. G.) Any Alterations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. H.) The Item/s Shall Be Delivered Within Fifteen (15) Calendar Days From Receipt Of Approved Purchase Order. I.) The Bucor Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. J.) Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Bucor Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. K.) Bidders Shall Submit The Required Documents Together With Their Bid Price In A Sealed Envelope Indicating Supplier’s Name And Name Of Project. L.) Submission Thru E-mail And Fax Quotation Will Be Allowed/accepted. Requirements To Be Submitted M.) Valid And Current Philgeps Registration Number N.) Valid And Current Mayor’s/business Permit Note: Allow Pes To Accept The Expired Buisness Or Mayor’s Permit With Official Receipt Of Renewal Application, Subject To Submission Of Business Or Mayor’s Permit After Award Of Contract Under Gppb Resoution No. 05-2020 Approving The Acceptance Of An Expired Mayor’s Permit With Offciial Receipt For Yhe Renewal Application. O.) Valid And Current Complete Income Tax Return Filed Thru Efps P.) Duly Notarized Omnibus Sworn Statement Note: Unnotarized Omnibus Sworn Statement Of The Lone Supplier Is Hereby Approved Subject To Compliance Therewith After Award Of Contract But Before Payment Under Gppb Resolution No. 09-2020 Approving Measures For The Efficient Conduct Of Procurement Activities During A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions. Q.) Duly Notarized Authority To Signatory (if Applicable). Note: Bidders Statement Of Compliance On The Terms & Conditions And Requirements As Stated Above _________________________ Signature Over Printed Name Of Sole Proprietor /authorized Representative Submit Your Sealed Quotation Duly Signed By You Or Your Duly Authorized Representative Not Later Than November 29, 2021 At The Bac Office, Bureau Of Corrections At 09:00 A.m. Late Submission Of Bids Shall Be Rejected. For Further Information, You Can Call The Bac Secretariat C/o William M. Terrado At The Supply Office, Bureau Of Corrections, Muntinlupa City At Tel # 809-8587/478-0907 From 8:00 Am To 5:00pm Or Email At Bacsecbucor@yahoo.com, Monday To Friday. Ccsupt Victor Erick L Pascua Chairperson, Bids And Awards Committee Rfq # 2021-083 Page 2 Of 2 After Having Carefully Read And Accepted The Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: Request For Quotation Rfq 2021-083 Project: Supply And Delivery Of Various Mechanical Tools Abc: ₱300,000.00 Qty Unit Description Compliance To The Technical Specifications (please Check) Unit Price Offered Quotation Approved Budget Of The Contract (abc) Yes No 2 Unit Hammer Drill 100-800w - 220 Volts 8,850.00 2 Unit Cordless Impact Driver Drill 18v With Battery And Charger 21,000.00 1 Unit Folding Flatbed Platform Hand Truck Trolley (capacity 300 Kg, , Foldable Handle 6,600.00 2 Unit Portable Pressure Washer 300-500 Psi, 1.5hp Electric Motor With 1 Meter Spray Gun, 10 Meter Spray Hose, Reverse Hose, Suction Hose, Strainer Hose 17,000.00 1 Unit Manifold Gauge, 3 Way Diagnostic Manifold Gauge Set For Freon/refrigerant Charging Fits R134a, R410a, R22 Includes 3 Color Hose 1/4" Female, 2 Pcs Adjustable Joint (1/4" -5/16"), 2 Pcs Adjustable Couples (1/4" Male), 3 Way Gauge (1/4" Male) 1 Pc Dual End Screwdriver 5,000.00 1 Unit Digital Inverter Arc Welding Machine Power Voltage 220v, Rated Input Capacity 3.8 Kva, Input Voltage Frequency 60 Hz, No Load Voltage 65v, Output Current Range 10-300a, Duty Cycle 60%, Efficiency 85%, Insulation Class F, Protection Class Ip21s 7,500.00 1 Unit Angle Grinder 5" 6,000.00 6 Pcs Magnetic Welding Jigs, 50 Lbs Multi-angle Welding Magnet Welding Holder 450.00 20 Pairs Leather Welding Gloves (heat/fire Resistant) 11,000.00 Signature Over Printed Name Of Sole Proprietor Or Representative Telephone No: ____________________ Cellphone No: ____________________ Email: ___________________________ Qty Unit Description Compliance To The Technical Specifications (please Check) Unit Price Offered Quotation Approved Budget Of The Contract (abc) Yes No 1 Unit Cut Off Machine, 14" Diameter 8,000.00 1 Unit Tire Changer, Bead Breaking Force: 2500kg Voltage: 220v / 60hz Outside Clamping: 10" - 22" Inside Clamping: 13 - 24" Working Pressure: 117 To 145psi, Motorcycle Atv Wheel Adaptor 102,000.00 1 Unit Cordless Air Blower 20v 2.0 Ah Lithium Battery 2in1 Sweeper / Vacuum 4,800.00 1 Set Spring Type Copper Tube Bender 1,000.00 1 Unit Oxy Acetylene Set, 30 Pounds Oxygen And Acetylene Tank With Complete Set Which Includes Hoses, Nozzle, Gauges 8,200.00 1 Unit Leak Detector Refrigerant Leak Detector Acu Refrigerant Leak Tester Which Include R-134a, R410a,r407a, R22, Rld-328p Detection R11, R12, R13, R502 R500. Ac Adopter 110 -240v, Auto Power Off 10 Minutes, Alarm Mode Buzzer, Three Color Led 7,200.00 1 Unit Aluminum Multi-purpose Ladder 20 Step (20 Ft), Aluminum Alloy, Water Proof, Corrosion Resistant, High Strength, Portable And Durable, Light Weight Compact Size, Heavy Duty Closure Strap That Secures Ladder Firmly 5,500.00 2 Unit Vacuum Pump, Material: Aluminum Alloy Casing Rated Voltage: 220v~ / 50hz, Pumping Rate: 3.6m3 / H Limit Pressure: 2pa, Motor Power: 150w 12,200.00 Signature Over Printed Name Of Sole Proprietor Or Representative Telephone No: ____________________ Cellphone No: ____________________ Email: ____________________________ Qty Unit Description Compliance To The Technical Specifications (please Check) Unit Price Offered Quotation Approved Budget Of The Contract (abc) Yes No 2 Pcs Clamp Meter Ac 600a + Ammeter Measurable Ac 0.1a～600a Acv & Resistance Measurement Continuity Check Buzzer Sampling Rate : Approx.2 Times / Sec.ac Frequency Bandwidth : 50～400hz 10,000.00 10 Pcs Metal Fin Comb Bristle Length: 58 Full Length: 140 Brush Material: Abrasive 1,550.00 2 Unit Analog Multimeter 6,000.00 1 Unit Air Compressor, 1hp Belt Driven 14,500.00 1 Unit Circular Saw 7 1/4" Continuous Rating Input1,600w Blade Diameter185 / 190mm Max Cutting Capacity At 90 Degrees:65 / 67mm (2-9/16" / 2-5/8")at 45 Degrees:44 / 45mm (1-3/4" / 1-3/4" ) No Load Speed (rpm) 5,500 Includes: Saw Blade, Rip Fence (guide Rule), Hex Wrench 6,000.00 2 Unit Welding Holder, 500 Amps 2,200.00 2 Unit Welding Mask, Lens Size 108 X 83mm Flip Up, Helmet/hand Shield Material: Fiberglass 3,950.00 1 Pcs Pipe Wrench 32" 6,200.00 1 Pcs Pipe Wrench 24" 3,100.00 1 Pcs Pipe Wrench 12" 1,600.00 2 Set Deep Socket 1/2 Drive (8mm-32mm) 6,600.00 2 Set Combination Wrenches (8mm-32mm) 6,000.00 Total: 300,000.00 Signature Over Printed Name Of Sole Proprietor Or Representative Telephone No: ____________________ Cellphone No: ____________________ Email: ____________________________ Company Letterhead Supply And Delivery Of Various Mechanical Tools Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: A) If A Sole Proprietorship: As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply And Delivery Of Various Mechanical Tools Of The Bureau Of Corrections, As Shown In The Attached Duly Notarized Special Power Of Attorney; B) If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply And Delivery Of Various Mechanical Tools Of The Bureau Of Corrections, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting ; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder]is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The Supply And Delivery Of Various Mechanical Tools. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2021 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ And Issued On ____________________ At _____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____