Battery Tenders

Battery Tenders

Southern Railway - SR Tender

Auction
Scraps
Ireps
India
Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16459 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534323 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable.[15]part Delivery Is Not Permitted Against Part Payment.[16]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Ernakulam)
Closing Soon17 Jan 2025
Tender AmountRefer Documents 

Stockholms Stad Tender

Electrical Goods and Equipments...+1Electrical and Electronics
Sweden
Details: Charging stations for trucks and machines. Battery storage.
Closing Date3 Sep 2031
Tender AmountNA 

City Of Cape Town Tender

Electrical Goods and Equipments...+1Electrical and Electronics
South Africa
Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500503 Title Torch Headlamp Aluminium Alloy Body Description 200 Each X Torch Headlamp Aluminium Alloy Body Specification* 1. Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2. Please Ensure That You Attach The Rfq Sample Checklist, Technical Data Sheets With Pictures And The Certificaiton Documentation ( Sans/sabs/sanas/jawswic) Where Applicable Of All Items Quoted On, To Your Rfq Submisison. Information Provided/attached In Relation To Specifications Must Be Submitted ****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent Torch - Type Headlamp Material Aluminium Alloy Body Lamp Led With Minimum 50,000 Hrs Lifetime, 3 X Mode Setting (100%/50%/flashing) Specifications Adjustable Focus Torch Powered By Rechargeable Battery Pack. Weather And Impact Resistant. Delivery Date2025/02/10 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Melck Street, Ndabeni Contact Persona.filby Telephone Number0214009269 Cell Number Closing Date2025/01/16 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.
Closing Soon16 Jan 2025
Tender AmountRefer Documents 

City Of Cape Town Tender

Electrical Goods and Equipments...+1Electrical and Electronics
South Africa
Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500502 Title Torch Headlamp Aluminium Alloy Body Description 200 Each X Torch Headlamp Aluminium Alloy Body Specification* 1. Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2. Please Ensure That You Attach The Rfq Sample Checklist, Technical Data Sheets With Pictures And The Certificaiton Documentation ( Sans/sabs/sanas/jawswic) Where Applicable Of All Items Quoted On, To Your Rfq Submisison. Information Provided/attached In Relation To Specifications Must Be Submitted ****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent Torch - Type Headlamp Material Aluminium Alloy Body Lamp Led With Minimum 50,000 Hrs Lifetime, 3 X Mode Setting (100%/50%/flashing) Specifications Adjustable Focus Torch Powered By Rechargeable Battery Pack. Weather And Impact Resistant. Delivery Date2025/02/10 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Melck Street, Ndabeni Contact Persona.filby Telephone Number0214009269 Cell Number Closing Date2025/01/16 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.
Closing Soon16 Jan 2025
Tender AmountRefer Documents 

PUBLIC BUILDINGS SERVICE USA Tender

Civil And Construction...+1Civil Works Others
Corrigendum : Closing Date Modified
United States
Details: State:south Carolina city:charleston delineated Area: start:north-head East On Calhoun St From Theintersection With Halsey Blvd Until Reachingconcord St east-head South On Concord St To Laurens St west On Laurens St south On Washington St. Washington St.becomes Pritchard St. Pritchard St. Becomesconcord St. west On Vendue Range south On Prioleau St. east On Middle Atlantic Whard St. south On Concord St. west On S. Adgers Wharf south On E. Bay St., E. By St. Becomes E.battery St. To Murray Blvd. south-west Onto Murray Blvd To Chisolm St. west-north On Chisolm St. west On Broad St. Broad St. Becomes Northon Lockwood Dr. take A Slight Right Onto Halsey Blvd Tocalhoun St. end minimum Sq. Ft. (aboa):7,107 Aboa maximum Sq. Ft. (aboa):11,000 Aboa space Type:office parking Spaces (total):6(2 Reserved, 4 Surface And/or Structured) parking Spaces (surface):please See Parking Requirement Above parking Spaces (structured):please See Parking Requirement Above parking Spaces (reserved):please See Parking Requirement Above full Term:180 firm Term:120 option Term:n/a additional Requirements: space Must Be In A Class A Building. space On The 2nd Floor Or Above Is Preferred, But Ground Floor Space Is Acceptable With Mitigating Security Measures To Be Determined Through Government Review. space Must Be Contiguous. Ceiling Heights Throughout The Majority Of The Space Must Be A Minimum Of 9', With Approximately 1,800 Contiguous Sf With Ceiling Height Of 9'-8" To 16’. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced Lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far). ). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b
Closing Date27 Jan 2025
Tender AmountRefer Documents 

Municipality Of Maragusan Compostela Valley Tender

Philippines
Details: Description 20 Btl/s Alcohol - Rubbing, 70 % Isoprophyl, 500ml 6 Roll/s Tape - Transparent 24mm (1") Width Usable Lenght Of 50m 20 Box/s Staple Wire - #35 5 Box/s Fastener - Paper, Plastic, 50 Sets/box 200 Pc/s Folder - Brown ( Long Size ) 2 Box/s Clip Backfold - 50mm 4 Roll/s Tape - Cloth Duct 3" 30 Pc/s Correction Tape - W/ Case 20 Box/s Clip - Paper-vinyl Coated ( Medium ) 20 Box/s Clip - Paper-vinyl Coated ( Big ) 5 Pc/s Tape - Double Sided 2" 5 Pad/s Note Pad - (3" X 3") 3 Pack Battery - Aa Penlight 2pcs./pck 5 Pc/s Stamp Pad - No.2 ( Purple ) 5 Btl/s Ink - Stamp Pad, Purple (50ml) 15 Pc/s Pencil - Wooden No.482 5 Pc/s Eraser - Rubber, Small 50 Pc/s Envelop - Long-brown 10 Pack Sticker Paper - 8.5 X 13, 10pcs/pack 1 Box/s Envelope - Mailing, Brown, With Window, 70gsm, 500s/box-long 40 Pc/s Ribbon- Refill - Lq310 15 Pc/s Ribbon- Cartridge - Lq310+ Dot Matrix 25 Pc/s Magazine Rack - Foldable Blue-115mmx270mmx325mm 6 Pc/s Mouse - Pad 5 Bx/s Push Pins - Flat Head,asst. Color 5 Roll/s Tape - Masking #2 50 Ream/s Paper - Book A4,210mmx297mm,min Of 70gsm 50 Ream/s Paper - Book Legal,216mmx330mm(8-1/2"x13"),min Of 70gsm 5 Pc/s Calculator - Big 1 Gal/s Glue - 4 Ltrs 2 Box/s Carbon - Film (black) - Long 1 Roll Laminating Film - 3" Wide, 250mic. 5 Packs Paper - Photo A4 Size 200gms 20's/pack 8 Pc/s Stamp - Paid W/ Date (metal) 1 Units I.d. Corner Cutter 6 Pc/s Pen - Sign G-1 Grip-0.5 Black
Closing Date20 Jan 2025
Tender AmountPHP 60 K (USD 1 K)

Security Printing And Minting Corporation Of India Limited - SPMCIL Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Corrigendum : Closing Date Modified
India
Description: CATEGORY: Fan Regulator,Double moduler electronic , Fan Regulator - Socket model , Capacitor , Exhaust fan capacitor 6mfd , Tubelight Side Holder , T5 tubelight holder , 1 way 6A piano switch , 6 ampere modular switch , 1-way, 16A, modular switch , single way 16A switch , 5pin 6A 240VAC nonmodular socket , 16 Amp Modular Type socket , 6 by 16A piano nonmodular socket , Bearing 6201 , Ball bearing 6202 ZZ , Bearing 6203 , Ceiling Rose , 6 A Single Pole MCB , MCB SINGLE POLE 16 AMPS , 25 A SPMCB , 32 Amp,1 Pole, Mcb , 16 AMPS DP MCB , 32 AMPS DP MCB , 4 Pole 63Amps MCB , 3 pole MCB, 63A , MCB ,3P, 125 Amp,415VAC - 50Hz , DB,MCB,DD,SSE,SPN,8 Way , Single Pole MCB Encloser , Metallic encloser for 2-pole MCB , Metal Encloser for 4 Pole MCB , 0.75sqmm 1core cu flexible wire , 1sqmm 1core cu flexible wire , 1.5sqmm 1core cu flexible wire , 2.5sqmm 1core cu flexible wire , 4sqmm 1core cu flexible wire , 6sqmm 1core cu flexible wire , 1.5sqmm 3core cu flexible cable , 2.5sqmm 4core cu flexible cable , 4sqmm 4core cu flexible cable , 1 inch Casing Capping , 4 inch x 4 inch PVC square box , Lamp, 100W , Lamp Holder , Angle Lamp holder B-22 cap , Batten lamp holder B-22 cap, , Plastic rawal plug no 8 , Screws 15mm x6mm , Screws 25mm x8mm , Screws 35mm x8mm , Screws 50mm x6mm , Screws 60mm x8mm , Screws 75mm x8mm , PVC cable tie 4mm x 150mm , PVC cable tie 4mm x 100mm , PVC cable tie 4mm x 200mm , STAR DELTA TIMER , DOL Starter 7.5 HP , DOL starter for 5HP motor , DOL Starter - 3HP , Ring Type Copper Lugs 16mm , Ring Type Copper Lugs 25mm , Ring Type Copper Lugs 35mm , Ring Type Copper Lugs 4mm , Ring Type Copper Lugs 6mm , Ring Type Copper Lugs 10mm , 16 Sqmm Copper Lugs , Copper 4sqmm pin type lugs , Copper 6sqmm pin type lugs , 10 sq mm Copper Lugs , Lugs Aluminium ring type 16 sq mm dia 10 , Lugs Aluminium ring type 25 sq mm dia 10 , AL LUGS RING TYPE FOR 35 SQ MM CABLE , Al 50sqmm Ring type lugs , Lugs Aluminium ring type 70 sq mm , Al 120sqmm Ring type lugs , 16sqmm pencil type alluminium lugs , 25 sqmm pencil alluminium lugs , Lugs Aluminium pin type35 sq mm , Lugs Aluminium pin type 50 sq mm , Lugs Aluminium pin type 70 sq mm , Al. pin type lugs 120sqmm , G.I.gland size 6sqmm , G.I.gland size 10sqmm , 16 Sq mm Cable Glands , Cable gland 25mm , Gland 35 mm sq , Gland 50 mm sq , Gland 70 mm sq , 5A 3 pin Top , 15A 3 Pin Top , 10K, 2watt, single turn pot , 10K, 2watt, Multi turn pot , 1K, 2watt, single turn pot , 1K, 2watt, Multi turn pot , 2K, 2watt, single turn pot , 2K, 2watt, Multi turn pot , 5K, 3watt, single turn pot , 5K, 3watt, Multi turn pot , 47K, 2watt, single turn pot , 47K, 2watt, Multi turn pot , 9volt. Non-chargeable battery , Long exercise notebook 380 pages , Pin type Copper lugs 25sqmm , Pin type Copper lugs 35sqmm
Closing Soon10 Jan 2025
Tender AmountINR 846.1 K (USD 9.8 K)

South Central Railway - SCR Tender

Auction
Scraps
Ireps
Corrigendum : Closing Date Modified
India
Description: Cond/scrap Alco Diesel Locomotives-vijayawada-pl No:98112326 [hsn Code-86079100]. Cond./scrap Alco Diesel Locomotive No-13245 Wdg3a , Of Dls/bza Consisting Of Main Chassis-chassis Fuel Tank, Cattle Guard With Stay Rods, Mr Air Tanks, Cylinder Blocks, Cylinder Head Assembly, Cylinder Head Studs, Valve Leaver Sets, Cylinder Liners, Fip Supports, Fips, Vibration Dampers, Vibration Damper Housings, Steel Cap Pistons, Crank Shaft Gear, Crank Shaft Dampers, Crank Shaft , Cam Shaft Bushings, S-pipes, Main Bearings, Gudgeon Pins, Connecting Rod Assembly, Extension Shafts, Extension Shaft Gears, Ost Assembly, Fip Covers, Tappet Covers, Turbo Super Chargers, Tsc Supports, Lubricating Oil Pumps, Push Rods, Push Rod Spacers, Fuel Jumpers, Water Jumpers, Water Risers, C/r Bushing With Nut & Bolts, Copper Pipes, Engine Base Sumps, On Line Lube Oil Centrifuge, Sump Covers, Piston Rings, System Pipes, Lube Oil Cooller (ptloc), Fuel Oil Filter Housing, Fast Coupling, Flexible Coupling, Rttm Blowers, Lube Oil Filter Drum, Inter Cooler Air Compressor, Radiator2-core Modified, After Cooler Air Compressor, Air Compressor, Fttm Blowers, Horizontal Shaft With Pulley, Right Angular Gear Box With U-shaft, Truck Without Traction Motors And Wheel Sets, Bogie Frame, Equalizer, Compensating Beams, Vertical Links, Outer Coil Springs, Inner Coil Springs, Spring Seaters, Brake Cylinders, Brake Hanger With Brake Heads, Brake Cylinder Pipes, Fish Plates, Re Silent Pads, Pull Rods, Slack Adjuster Assembly, Stay Plate, Gear Case, Vertical Dampers, Latter Dampers, Axle Boxes, Axle Boxes Hnbc With Bearings, Hand Brake Assembly, Engine Hood Consisting Of - Power Pack Hoods, Driver Cabins, Radiator Compressor Hoods, Fuel Oil Gauge, Water Expansion Tank, Traction Alternator, Exciter Generator, Aux Generator, Traction Motors, Bkbl, Power Cables, Control Wires, Ccem, Dem, Ep Contactor, Fpm, Bkt, Control Drum, Rev, Gf Contactor, Relay, Resister Grid, Rectifier, Air Brake System Bracket With Valves, Air Maize, Exhaust Manifold Set, J-filter Housing, Governor, Load Pad, Loco Side Buffers, Cbc Coupler With Draft Gear, Apu, Miscellaneous, With All The Above Items Contains ¿ Ferrous-96800kg, Copper-6613kg, Brass-840kg, Aluminium=647kg, Total Qty=104.900 Mt. (these Weights Are Obtained As Per Ds-8. All Weights Are Given By The Custodian. The Locomotive Is Available At Compound Of Dls/bza. Under Control Of Sse/loco/bza. Sold On Number Basis And Delivery On By Lot Basis. Cutting Is Permitted For Loading Purpose. This Locomotive Consisting Of Rc- Items-1) Wheel Sets With Bull Gear Suspension Tube-06-nos. 2) 8v 450/500 Ah Lead Acid Batteries -8nos. Note: A) The Above Rc-items Should Return To The Railways Before Effecting The Delivery Of The Cut Parts Of The Locomotive. B) The Purchaser Should Keep The Similar Items As Separate Heap. C) The Purchaser Must Clean The Cutting Area After Completion Of Delivery. Ds-8 No: 236200040. Dt.23.11.2024.
Closing Date28 Feb 2025
Tender AmountRefer Documents 

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION USA Tender

Software and IT Solutions
United States
Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: highly Capable Small Uavs Provide Substantial Business Opportunity, Especially If Allowed To Operate In The Suburban Market. Reliability Issues Force The Use Of A Safety Pilot For Each Vehicle In Operation, Which Is Cost-prohibitive For Large Scale Commercial Applications And Limits The Use Of These Vehicles To Line-of-site (los) Operation. Extending The Use Of Small Uavs To Beyond Visual-line-of-sight (bvlos) And To Fleet Operations Requires A Vehicle System To Autonomously Perform Emergency Management Activities As A Replacement To The Human Pilot To Maintain Safety To People And Property In Populated Areas. safe2ditch Is A Crash Management System That Resides On A Small Processor Onboard A Small Unmanned Aerial Vehicle (uav). The System's Exclusive Mission Is Emergency Management To Get The Vehicle Safely To The Ground In The Event Of An Unexpected Critical Flight Issue. It Uses The Remaining Control Authority And Battery Life Of The Crippled Vehicle In An Optimal Way To Reach The Safest Ditch Location Possible. It Performs This Mission Autonomously, Without Any Assistance From A Safety Pilot Or Ground Station. In The Event Of An Imminent Crash, Safe2ditch Uses Its Intelligent Algorithms, Knowledge Of The Local Area, And Knowledge Of The Disabled Vehicle's Remaining Control Authority To Select And Steer To A Crash Location That Minimizes Risk To People And Property. As It Approaches The Site, It Uses Machine Vision To Inspect The Selected Site To Ensure That It Is Clear As Expected. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-243 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.
Closing Date23 Apr 2025
Tender AmountRefer Documents 

Sabatan Elementary School Tender

Publishing and Printing
Philippines
Details: Description 1 Alcohol, Ethyl. 1 Gallon - 5 Gallon - 2 Sign Pen, Extra Fine Tip, Black - 10 Pcs - 3 Battery, Dry Cell. Size Aa - 10 Packs - 4 Broom (walis Tambo) - 20 Pcs - 5 Broom (walis Tring Ting) - 20 Pcs - 6 Philippine National Flag - 2 Pcs - 7 Electric Fan, Wall Mounted - 18 Unit - 8 Flash Drive - 20 Pcs - 9 Light-emitting Diode (led) Light Bulb, 7 Watts - 20 Pc - 10 Glue, All Purpose - 2 Jar - 11 Tape, Transparent 48 Mm - 20 Pc - 12 Binding And Punching Machine - 1 Unit - 13 Calculator, Compact - 1 Unit - 14 Cutter/utility Knife, For General Purpose - 1 Pc - 15 Envelope. Documentary, A4 - 1 Box - 16 Envelope. Documentary, Legal - 1 Box - 17 Envelope, Expanding, Kraft - 2 Box - 18 Envelope, Expanding, Plastic - 21 Pcs - 19 File Organizer, Legal - 3 Pc - 20 File Tab Divider, A4 - 3 Packs - 21 File Tab Divider, Legal - 3 Packs - 22 Folder, Fancy With Slide, A4 - 1 Bundle - 23 Folder, Fancy With Slide, Legal - 1 Bundle - 24 Folder, L-type, A4 - 1 Pack Folder, L-type, Legal - 1 Pack - 2 Folder With Tab, Legal - 1 Pack - 3 Marker, Permanent, Black - 21 Pcs - 4 Marker, Whiteboard, Black - 21 Pcs - 5 Pencil Sharpener - 1 Pc - 6 Puncher, Paper, Heavy Duty - 1 Pc - 7 Stamp Pad. Felt - 1 Pc - 8 Tape Dispenser, Table Top - 1 Pc - 9 Paper, Multipurpose, A4 - 250 Reams - 10 Paper, Multipurpose, Legal - 3 Reams - 11 Tissue, Interfolded Paper Towel - 10 Packs - 12 Multifunction Printer - Brother - 1 Unit - 13 Double Sided Tape - 5 Pcs - 14 Photopaper - 11 Packs - 15 Certificate Holder - 100 Pcs - 16 Air Conditioning Unit - 1 Unit - 17 Smart Television - 3 Units - 18 Microphone - 2 Pcs - 19 Plastic Fastener - 4 Box - 20 Glue Stick (paste) - 2 Pc - 21 Mobile Phone - 1 Unit - 22 Ink Jet Printer-epson L3210 - 10 Units - 23 Office Chair - 1 Unit - 24 Epson Ink 003 20 Sets 25 Certificate Frame - 6 Pcs
Closing Soon13 Jan 2025
Tender AmountPHP 388.3 K (USD 6.6 K)
2521-2530 of 2694 active Tenders