Tender Results of Rail Coach Factory

End Fitting To Pg-11,annx A,tab.a2,sno2.

End Fitting To Pg-11,annx A,tab.a2,sno2.

End Fitting To Pg-11,annx A,tab.a2,sno2.

73032761 hex Head Bolt M24x180 High Tensile, As Per Drawing: Is:1364(part-1)-1992, B, 8.8, ce, Wf, Coating As Per Mdts-057, Packing Instruction: As Per Standard Packing. It Should Be ensured That Item Should Not Rub During Transportation. The Item Should Be Packed Wi th Adequate Strength. Transit Damage , If Any , Shall Be At The Cost Of Supplier. [ Warra nty Period: 30 Months After The Date Of Delivery ] ] consignee Furnishing Depot, Rcf Punjab 3006.00 Numbers inspection

End Fitting To Pg-11,annx A,tab.a2,sno2.

33553385: ROOF ARCH FOR AMRIT BHARAT GS COACH. NOTE:-FIRM SHALL COLLECT ALL LATEST/FINAL DRAWINGS BEFOREMANUFACTURING. THERE MAY BE MINOR MODIFICATION IN DESIGN TO SUIT RAILWAY REQUIREMENT & MODIFICATION TO BE

Supporting Angle For Roof Ceiling To Pl No- 33598915

Set Of Chair Angle For L.h.b Scn Eog Coaches.

Brush Flat 25 Mm

25 Kv Ac Ohe Power Presence/absence Indicator, Display Cum Power Supply Unit Model Number Ss402 Or Equivalent Each Set Will Consist Of The Following: 1) Display And Control Unit Combined Cum Power Supply Unit : Type-electronics, Display- Through Led, No. Of Leds 3 Number, Green- 1, Red -1, Amber-1, Sealed Sensor- Induction With Processed Digital Data Stream Output, Range- 17.5 Kv To 27.5 Kv With Instantaneous Maximum Of 30 Kv, Input Range - 180 To 250 V Ac, 50-60hz, Military Grade Round Connector: A) Four Pin Connector 2 Number Contacts Suitable For 230v Ac, 0.5 Amps Each To Operate Flasher / Warning Lights, B)three Pin Connector For Interconnecting Cable, C) Ac Power Socket And Plug For 230v Ac. 2) Sealed Sensor: Sealed With Resin To Protect Electronics From Vibration Weather Hazards, Mounting Through Hole Of Sensor Mount. 3) Connecting Cable: 2 Core Cable With Screen, Ends Soldered To Polarized Connectors To Prevent Any Inadvertent Wrong Connection, To Connect Sealed Sensor And Display Cum Power Supply Unit, Length Of Connecting Cable 5meter Including Connectors. 4) Sensor Mount With Guard: Slung From Roof Truss With Suitable Bracket, Mount Centrally I.e. Directly Above The Ohe And Guards Must Be Parallel To The Ohe Ip 65.