Tender Results of Qatarenergy

SETTLEMENT SURVEY FOR VARIOUS FACILITIES IN MESAIEED OPERATIONS-QP requires the following SERVICES to be carried out. ",,Settlement Survey of Crude Oil Storage Tanks in Tank Farm ",,Settlement Survey of Product Storage Tanks in NGL Plant CONTRACTOR shall carry out, traverse and level surveys of existing survey control stations, carry out settlement surveys of existing facilities, establish settlement survey points, conduct base line, settlement and control surveys and install new settlement and control survey points as required. The SERVICES shall consist of Two (2) Phases. An initial phase to verify existing site survey control stations, survey existing settlement survey points, establish new site survey control stations and settlement survey points and conduct baseline settlement survey for new settlement survey points for all of the listed facilities. Final phase will be a return visit after ten (10) months to verify the site survey control stations and carry out a repeat settlement survey for all settlement survey points for all of the listed facilities SERVICES shall include all aspects of site investigation, survey, document retrieval, design, engineering, procurement, fabrication and installation for new settlement survey points, baselines, settlement and control station surveys, preparation and submission of survey reports.

PROVISION OF ASSET INTEGRITY AND FABRIC MAINTENCE SERVICES AT PS1 AND INSPECTION SERVICES USING ROPE ACCESS AT QP OFFSHORE LOCATION-CONTRACTOR's Scope of Services is to carry out "Asset Integrity Inspection and Fabric Maintenance" which includes supply of specialized CONTRACTOR personnel, equipment and material to carry out the following services: a) Conventional N

ELECTRICAL MAINTENANCE AND MINOR MODIFICATION WORKS AT MESAIEED OPERATIONS ON CALL OFF BASIS-QP requires the SERVICES of a CONTRACTOR to carry out all Electrical Maintenance and minor modification works at QP Mesaieed Operations Areas on call-off basis for five(5) years as and when required by QP. CONTRACTOR shall carry out the SERVICES at all SITE throughout the State of Qatar, which fall under the jurisdiction of QP Mesaieed Operations.

MAINTENANCE SERVICES FOR PSVs & RVs IN NGL PLANTS AND FACILITIES AT MESAIEED OPERATIONS-Contractor shall undertake the maintenance work for Pressure Safety Valves / Relief Valves (PSV/RV) in NGL-1, NGL-2, NGL-3, NGSF, NGL-4 Plants, Storage and Loading facilities and Common Utilities located within the NGL complex, Tank Farm and Terminal Facilities at Mesaieed Industrial Area and Transmission & Distribution facilities spread all over the State of Qatar as specified in the Scope of Services for a period of 5 years. Contractor shall perform the services either when the plant/unit is in operation but the PSV/RV will be isolated, or when the Plant / unit is in shutdown.

PROVISION OF EQUIPMENT AND PERSONNEL FOR RAS LAFFAN AND DUKHAN STORES-Contractor shall provide all personnel, equipment/machinery for Ras Laffan Stores and personnel only for Dukhan stores for loading and unloading services at Ras Laffan Stores and Dukhan Operations

INTEGRATED UMBRELLA CONTRACT FOR CIVIL CONSTRUCTION AT IS HALUL-Brief Scope of Work covered under this Contract are primarily for Civil Works at Halul IS facilities for minor and major civil construction project work, which includes construction engineering, fabrication/pre-casting, construction installation and testing and involves providing Contractor personnel, materials, plant, equipments and tools in sufficient quantities to maintain QP's development programs.

Provision of Bus Transportation Services-Provision of Bus Transportation Services

MISCELLANEOUS CIVIL WORKS AT VARIOUS LOCATIONS IN DUKHAN FIELDS-MISCELLANEOUS CIVIL WORKS AT VARIOUS LOCATIONS IN DUKHAN FIELDS

PROVISION FOR VARIOUS ACCESS PLATFORMS IN DUKHAN FIELDS-Provision for Various Access Platforms in Dukhan Fields

BOW-TIE DEVELOPMENT AND OTHER ASSOCIATED MAHM DELIVERABLES FOR ALL QP PRODUCTION FACILITIES AT QP OPERATIONAL AREAS-The Scope is to carry out Technical Site Survey of Process Safety Barriers, Bow-tie Development, Identification of MAH Critical Elements (MCEs) and MAH Critical Tasks (MCTs), Performance Standard Development for MCEs and MCTs, MAH Risk Register, Matrix of Permitted Operations (MOPO), Major Accident Hazard Management (MAHM) Report for all QP operating areas.