Foot Rest Tenders

Details: :seats For Lhb Non Ac Chair Car Coaches (108 Seater). Follow Cushioning Ma Terial Either Pu Foam To Rdso Spec. Rdso/2007/cg-04 Rev. 01 Or Silicon Foam To Rdso Spec . Rdso/2013/cg-13 Rev. 01 With Fire Properties Compliant To R21 Hl-3 Of En45545 Standard And Upholstery To Rdso Spec. Rdso/2008/cg-07 Rev-nil With Amendment Slip No-5 And Cor Rigendum 1 Of May 2015, As Per Drawing: Mdts-219 Rev.03 With Corrigendum No.1 Issued Vid E Letter No Md35131 Dt.31/01/22, Packing Instruction: Chair Car Seat( Ac & Nac ) : I. All Protr Uding Portions Of The Chair Car Seat Should Be Protected With Plastic Cover. 2.then Co Mplete Seat And Its Corners / Hand Rest/ Foot Rest Should Be Properly Wrapped With Bio Degradable Air Bubble Sheet Of Thickness 30 Micron And Bubble Diameter 10mm. 3. The Fu Ll Seat Should Be Further Wrapped With 3 Ply Corrugated Paper Sheet. 4. Each Individual Chair Should Be Covered All Around With Transparent, Plain, Biodegradable, Polythene Sheet To Prevent Ingress Of Dust/water. 5. The Seat Bottom Frame Portion Sh Ould Be Fitted With M.s Supports For Its Balancing, So That The Chair Can Rest On The Fl Oor Without Tilting On Any Side. 6. The Overall Packing Should Be Such That It Is Not Da Maged During Transportation Of The Material, The Seats Should Be Tied Up In Pairs Only. 7. All Hardware/accessories/loose Items In One Coach Set Should Be Separately Packed I N Wooden Box Having Sufficient Strength. 8. A List Should Be Pasted On Each Box Showi Ng Purchase Order No., Pl No., Description Of Item, Drg. No., Quantity, Firm Name, Addres S & Date Of Dispatch And Its Contents. Note : Qr Code Is To Be Affixed " Near Manufactur Er Name Plate On Each Seat " On Top Of Packed Seat As Per Pi Mentioned Above " On Top O F Wooden Box For Sr.no.7 Qr Code Having Details As Listed Below : 1 Name Of The Manufa Cturer 2 Purchase Order Number 3 Purchase Order Date 4 Unique Serial Number (or Lot Number For Bulk Items) Of The Manufacturer O R 5 Date Of Manufacture 6 Delivery Challan No. 7 Delivery Challan Date The Qr Code Shall Be As Per Iso/iec18004 Model2 And The Data Shall Be Available As Xml Using The Tags Detailed Above. Incase The Above Deta Ils Are Not Available, Or The Qr Codes Are Not Readable, The Supplied Material Is Liable To Be Rejected. [ Warranty Period: 84 Months After The Date Of Delivery ] ]

Description: Scrap & Condemned Foot Rests Of Lhb Chair Car Of Sorts & Sizes, Complete Or Incomplete With Or W/o Attachments, As It Is, Us & Ur. Qty = 4800.00 Kg Loc:-lying At Beside Of New Carriage Godown Infront Of D-05 In Judw. Remarks-loading By Purchaser. Note:- Approx Weight Of 1 Piece = Kg Brief Summery Of 1 Piece = { Aluminium Paddle (2 Nos) = 0.300 Kg (18.75%), Aluminium Body = 0.500 Kg (31.25%), M.s. Rod = 0.200 Kg (12.5%) & M.s. Holding Brake Mechanism = 0.600 Kg (37.5%) }

Description: Scrap Ferrous Melting Consisting Of Coach - Cutting , Coach & Wagon Door,window & Seat - Bearth Frame,wire & Wire Rope, Structure,ring - Washer,protective Pipe, Lower Spring Seat,pipe & Tie Bar Fencing, M..s.grill, Brake Beam, Gear Case ,eq. Stay, Anchor Link, Damper, Shock Absorver, Slack Adjuster, Empty Electric Panel,box, Dummy, Brake Shoe Head & Key, Side Frame Key, Shuckle- Stone,m.s.& G.i,( Pipe& Sheets,),foot Step ,foot- Rest Plate, Helical Spring Up To 03 Coil & Brocken Helical Spring Up To Single Coil, Fan Blower & Housing, Bmbc Cover,plane & Twisted Bar, Bond- Strip,follen Rod,u- Type Bracket, Clamp,pin, Nut, Bolt, Cotter, Cut Pcs. Of Sig. Location Box, Crusible & Its Parts,pandrol Clip, Linner,small Cut Pcs, Of Angle, Plate ,chanel( Up To 12 Inch) Rivet,tirfor, Chain Pull Lift,tank Cutting Parts, & Other Various Released Items From Loco, Carriage Sig.,trd, Tmc,of Sorts & Sizes With Or W/o Steel, C.i.& Neg. N.f.attachment If Any. Note-1 - L.b.p., 2-cutting Allowed For Loading Purpose,3-other Than Melting Items Will Be Separated At The Time Of Cutting / Loading. Location: Lying Between W/a-02 & Plate Form Near L/n-13

Description: Scrap Ferrous Melting Consisting Of Coach - Cutting, Coach / Wagon Doors, Window & Seat- Bearth Frame, Light & Heavy Structure,cattle- Gaurd, Bogie Stand,washer Ring,protective-pipes, Lower Spring Seat,pipe & Tie Bar Fencing, Grills, Brake Beams, Gear Case, Machine Table & Structure, Sheet Cutting,eq. Stay, Slack Adjuster,dummy- Box, Supporting Parts Of Bogie Frame,u- Shaped Bracket,brake Shoe Head,shock Absorver,m.s & G.i Pipes,foot Step, Foot Rest Plate,anchor Link Helical Spring Up To 03 Coil & Brocken Helical Spring Up To Single Coil,fan Blower & Housing, Bmbc Cover,plane & Twisted Bar, Wire & Wire Rope, Bond Strip, Follen Rod, U-type Bracket / Clamp, Pin, Cotter, Washer, Bolt, Nut, Shuckle Stone, Side Frame Key, Brake Shoe Key,rivet, Small Cut Pcs.of Angle, Plate Up To 18 Inch,& Other Various Released Items From Loco, Carriage, Electric, Trd, Tmc, Sig. Etc Of Sorts & Sizes Fit For - Melting With Or W/o Steel, C.i.& Neg. N.f. Attachment If Any. Note- 1- L.b.p.2- Cutting Allowed For Loading Purpose. 3- Other Than Melting Items Will Be Separated At Time Of Cutting / Delivery. Location: Lying Between L/n-12 & Oil Godown In Plot-a

Description: Lot No.-c&w/adtp/24-25/57, Desc.-unserviceable & Scrap Released Cut Pieces Of Sheets/plates Of Different Sizes And Thickness, Misc. C&w Fittings Like Different Types Of Rods, Angles, Channels, Hand Brake Wheel, Broken Foot Steps, Door Rester, Cbc Lock, Broken Knuckle Pin, Broken Spring, Etc. And Other Small Fittings (like Rivet, Screw, Bolts, Nuts, And Washers) Which Are Not Being Maintained Saperately In Bin Card., Approx. Total Weight-55 Mt