Foot Rest Tenders

Description: Scrap Ferrous Melting ,light Melting & Juck - Katchra Consisting Of Coach Cutting Parts, Doors, Window &seat Bearth Frame, Pipe ( M.s. G.i.), M.s.& G.i.sheets ( Plane & Corrugated), Bmbc Cover, Eq. Stay, U- Type Bracket, Shock - Absorver, Thin Helical Spring Up To 03 Coil ,brocken Helical Spring Up To Single Coil, Dust Sheild Spring, Cut Of Angle Cock, Gear Case, Brake- Beam, Foot Rest Plate, Foot Step,fan Blower, Fan Cage, Empty Electric Panel / Box, Slack - Adjuster, Wire & Wire Rope, Plane & Twisted Bar, Bond Strip, Tirfor,nut , Bolt, Pin, Cotter, Bucket Wire Mesh,g.i.duct & Sheet, Cooler Body & Frame, Dismental Frame Of Chair & Table, Rack ,almirah, Lower Spring Seat , Protective Tube, Fencing, Structure,ladder,housing,battery Box,filter, Drums Of Sorts,shutter,spade,wheel Barrow,dust - Cart,wire Clawn,rake Ballast,ring,silent Block & Other Various Released Items From Loco, Carriage,trd,electric, Sig.p.way, Etc Of Sorts & Sizes Fit For Melting,light Melting &junk Katchra With Steel, C.i.& Neg. N.f.attachment If Any. Note- 1- L.b.p. 2- Cutting & Digging Allowed For Loading Purpose. 3-days Alloted For Cutting And Digging- Ten Working Days And At The Time Of Delivery 4- During Cutting & Digging If Any Other Scrap Found Do Not Pertain Melting,light Melting & Junk Katchra Will Be Seperated & Not Delivered To Purchaser, Location - Lying Between L/n-10& 11 From Road To Tin Shade In Plot-a.

Description: Scrap Ferrous Melting & Light Melting Consisting Of Coach Cutting, Doors ,window & Seat Bearth Frame,tree Gaurd, Battery Box, M.s.& G.i.pipes & Pipe Fitting, M.s.& G.i.sheets ( Plane / Corrugated), G.i.duct,brake Beams, Gear Case, Protective Tube, Lower Spring - Seat,side Frame & Brake Shoe Key,nut, Bolt,pin, Washer, Ring, Thin Helical Spring Up To Three Coil, Brocken Helical Spring Up To Single Coil,locking- Plate, Dust Sheild Spring,cut Up & Damage - Drums Of Sorts & Sizes,filter,wire & Wire Rope, Expanded Metal, Wire Mesh,fabricated Structure, Dummy / Box, Empty Electric Panel, Sig. Pole, Etd Pully Frame, Tirfor,rachet,chain Pull Lift, Shock Absorver,damper, Slack Adjuster, Bucket, Rack ,almirah, Dismental Frame Of Chair & Table, Empty Fire Extingure, Cut Pcs.of Sig. Location Box,moulding Frame,phinolex Pipe,u- Type Bracket, Foot Rest Plate, Foot Step, Fan Housing & Cage, Eq Stay, Bmbc Cover, Plane & Twiste Bar, Pipe& Tie Bar Fencing, Phawarh, Rake Ballast,wire Clawn, Dust Cart, Spaner,silent Block,pan,wire Basket, & Other Various Released Items From Loco, Carriage, Sig. Trd. P.way,electric,of Sorts & Sizes Fit For Melting &light Melting With Steel, C.i.& Neg.n.f.attachment If Any. Note- 1- L.b.p. 2- Cutting & Digging Allowed For Loading Purpose.3-days Alloted For Cutting And Digging -eight Days And At The Time Of Delivery 4- Other Than Melting & Light Melting Items If Found During ,digging & Cutting Will Be Seperated & Not To Be Delivered To Purchaser. Location: Lying Between L/n-9 & Road Near N.f.godown In Plot

Description: Ubl/gsd/254/x-ray&radiography Machine/24/l [pl No.98411214] Condemned And Un-serviceable X-ray And Radiography Machine Scrap Consisting (1)srd 325 X-ray Machine With Motorized (0.5hp) Table Over Couch And Under Couch Tubes And Tomography Attached (laminated) With Standard Accessories Like Foot Rest , Hand Grips, Compression Band: Stainless Steel This Machine Was Dismantled Condition. The Following Items Are(1) Motor 0.5 Hp, Qty- 01 (2) X- Ray Table Metallic Steel- Qty-01 (3) Bucky-qty-02 (4) Fluoroscope 01 Nos(5) X Ray Tube-02nos (6) Console-01 Nos(7) Collimator -01 Nos, (8) Electrical Junction-01 Nos (9) Pillar-01 Nos, (10) Foot Rest-01 Nos (11) Hand Grips- 05 Nos, (12) Compression Band-01 Nos &vertical Stand-01 Nos (13) Tomography Accessories-balancing Weights & Metallic Steel(minimum-25 Kgs)- Qty- 10 Nos, (14) High Tension Transformer Tank With Cable-01 No, (15).other Miscellaneous Items(note:to Be Disposed Of In Such A Way That X Ray Tubes Not To Be Reused) (2) Portable Radiography Machine Was Of Make Allegers Medical System Model Opel-2.5 The Following Items Are (integrated Within The Machine)x Ray Tubes , X Ray Generator, Collimator, Tubes Stand /vertical Column, Exposure Control Panel, High Tension Transformer, Wheels With Aluminum Caps And Other Related Items.available Under The Custody Of Cdms/rs Ward/gsd/ubl. Note: Purchaser Has To Physically Inspect The Lot Before Bidding. Location:- Road No:02 Bin No-254. Remarks-. Delivery Should Be Start From One End. No Pick And Choose Allowed. N.b.- The Successful Bidder Should Produce At Least Once During The Currency Of The Original Cpcb Certification On The Basis Of Which The Depot Officer Will Certify The Xerox Copy And Keep In Record For Further Action. This Should Be Done Before Making First Delivery. The Successful Bidder Should Also Submit The Cpcb Passbook And Other Relevant Documents As Per The Extent Rules At The Time Of Taking Delivery For Verification Of Originals And Entry Of Delivery Quantity In Cpcb Passbook. If The Purchaser Fails To Comply With This, Emd Will Be Forfeited.