Fabrication Tenders

Details: Description:- Css-1: Supply, Install, Test And Commission Of Css Substation Enclosure Non Walk- In type Fabricated By Gi Steel With Accessories (1) 11kv, 630a, 21ka/3sec. Ring Main Unit Consisting Of 1no. Incoming Fixed Vcb (manually Operated) & 2nos. Outgoings Fixed Vcb/sf-6 (manually Charging & closing) (2) 250kva, 11/0.415kv Crt Dry Type Transformer (3) On Load Changeover Switch Capacity 4- pole, 415v, 630a (4) Lt Panel Shall Consist Of 1no. Incoming Of 400a, 4pole, Mccb & Outgoings Of 4 nos. 4pole 100a Mccb And 1 Nos. 4pole, 250a Mccb (5) Apfc Panel Of 70kvar. Note: Foundation Of css Is Taken Separately. As Per Specification

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Earth excavation by mechanical means Hydraulic excavator or manual means for foundation substructures plinth beam cess pits trenches all.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Providing and laying plain cement concrete 1 is to 2 is to 4 using 20mm maximum size graded aggregates including mechanical mixing transp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Providing and laying Reinforced cement concrete M30 using 20mm maximum size graded aggregates including mechanical mixing transporting et.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Providing straightening decoiling wherever necessary bending cutting binding and fixing in position steel reinforcement TMT bars of Fe 50.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Supplying fabricating erecting and fixing in position at all levels centering and shuttering to correct line and levels including strutti.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Providing and constructing 200mm thick precast concrete solid blocks masonry wall in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 7 Leveling the area to the required gradient in all types of soil including cutting the mounds wherever required for filling the low lying .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 8 Providing plastering to the external surfaces of brickwork concrete at all elevations in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 9 Dismantling of RCC works at all levels by manually by mechanical means including Cutting and stacking of steel reinforcement bars and dis.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 10 Demolishing Stone rubble masonry In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent stru.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 11 Dismantling brick work In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent structures inc..

Description: CATEGORY: Manufacturing and supply of Structural items of FOL shed of Size 4200 X 3200 X 3000 mm using mild Steel structure , Side walls stores using 0.60mm of PPGL sheets , Roofing Sheets as per TS , MS Doors as per TS , Self screw for fixing of roof size as reqd on site. , Star Screw full thread 25 mm ISI Mark , Nuts and Bolts 8mm dia 60mm to 120mm long with washer , GI J Hook 8mm with 1 nut 2 bitumin washer and limped washer , Rivit of 500 Nos , LED Tube light complete set 18W 4 feet long , Switch Piano flush type , PVC switch board 6 inch x4 inch , PVC casing and capping of size 25 mm , Wire Single Core Copper Conductor 2.5 Sqmm , MCB 10 Amp SP , Armoured Cable10 sqmm 4 Core copper , LT Panel Board Factory Fabricated , Shelves for storage 2100 mm x 450 mm x 750mm , Insulation tape 45 Mtr with ISI mark , Change over switch 100 Amp 04 pole , Ceiling Rose. , Service wire 10 sq mm flat 2 core aluminium connector cable , GI Wire 14SWG , Fire Extinguisher 6 Kgs ABC dry powder stored pressure type , Paint for touch up Green , Paint for touch up Black , Distemper , Plywood as per TS , Scantling teak wood size 140 to 160 inch , FRP Storage Tank Conforming to UL 1316 of Capacity 5KL with standard accessories , Wire Single Core Copper Conductor 2.5 Sq mm , PVC Pipe 100 MM Dia , GI Elbow 20mm , GI Gate valve connector , GI Socket 20mm with thread , GI Union 20mm , PVC flexible hose pipe 20 mm dia , Lightening Conductor made of copper Tube with five copper prongs of length 15 cm with complete stores , Industrial Fuel Transfer Pump Automation Grade , Provision of fire extinguisher 50 Kgs ABC Dry powder stored pressure type trolley mounted. , HDPE Tarpaulin of Size 30 feet x 30 feet , Ordinary Portland Cement grade 43 , Coarse Sand , Stone Aggregate 20 MM , Stone Aggregate 40 to 60 mm , 10 mm TMT Bar , RR Masionary stone , Connected stores as per final design

Description: 12229ms25c, 98050011, Quantity- 17.940 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 229, Right Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery

Description: CATEGORY: UPVC bend , 15mm Brass stop cock Conforming to IS-8934 1978 , 3 Layer of PP R Polypropylene random copolymer Pipes SDR 7.4 , 20mm elbow suitable for 20mm dia PPR pipe conforming to IS 1239 1989 , 20mm Socket suitable for 20mm dia PPR pipes Conforming to IS 1239 1989 , 20mm equal Tee suitable for 20mm dia PPR Pipe conforming to IS 1239 1989 , 20mm union suitable for 20mm PPR pipes Conforming to IS 12391989 , PPR End Plug 20mm conforming to IS 1239 1989 , PPR pipe clamp suitable for 20mm piping , Bib cock 20 mm with flange conforming to IS 8931 1978 , GI reducer socket 15 obliq 20mm , GI reducer elbow 15 obliq 20mm , Pre fabricated Man hole cover 6 feet x 4 feet made of ISA 40x40x6mm frame , Rotational moulded polyethylene water storage tank double layer , PPR tank connector 20mm with Check nut and washer , White lead safeda , Thread cotton ball 100 m long , Vitreous china wash Hand Basin WHB white flat back size 550x400 mm , 20mm dia pillar taps of PTMT of any colour high pressure screwed for iron pipe , 110mm dia UPVC SWR pipe single socketed pipe Type A in any length with rubber joint , 600x450mm size looking mirror mounted on PVC with PVC shelf assembly including all fittings all as specified , Drilling machine portable type electrically driven , Aluminum straight edge 50mm square 2mm thick 1800mm long , Wooden Flat Gurmala , Hand rivet gun machine , Tile cutter machine with 6 spare blades each , Tasla Iron 18 inch , Cutting plier insulate 6 inch , Screw driver 12 inch with insulated plastic handle , Adjustable spanner 12 inch , Hacksaw frame with 2 blade , Hand gloves insulated with 2 rubber , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30m , Mason trowel Karchi , Axepicks with wooden handle , Fawda with wooden handle , Rammer with wooden handle of wt 5 Kg , Pipe wrench 12 inch , Pipe wrench 18 inch , Aluminum spirit level 6 inch , Brick Line Best quality , PPR Welding electrode 20 to 63mm , Plumbob 250gms , Tape measuring metallic 5m

Description: CATEGORY: Food thermometer , Lactometer , Refrigerator freezer Thermometer with hang stand , Heavy duty Plastic palle , Heavy duty Plastic crates for fruits and vegetables foldable , Todd Box for milk , Menu display board , Pin notice board , Colour coded garbage bins wet waste dry waste , Hand wash soap dispenser , Hand towel dispenser , Wet sign board , Cutlery sterilizer , Spoon sterilizer , SS 304 Commercial tawa , Tawa round , Strainer , Ms rack 6 tiers square pipe leg flat shelf with 3 side 2 inch brim , SS 304 masala box 12 , Ss 304 masala box 6 , Rice boiler , Ss commercial high pressure steam cabinet no boiler required , Idli steamer , Cabinet 2 door , SS Storage cupboard for cutlery and crockery , Commercial hand blender , Commercial beach juicer , Commercial sandwich griller , SS 304 Salamander oven , SS 304 Automatic Juice Machine , Heavy duty mixer , Bread toaster , Uv sterlizer wall mounted for knives , Soup container with lid , Salad Counter Fabricate Salad counter cum service counter Top 16gauge SS 304 grade sheet covering 20swg SS 304 grade sheet , Milk -tea dispenser , Juice dispenser , Food warmer , Chinese wok , SS 304 Stock pot with lid thick base 5mm sides- 18 gauge100 Litre 60 KG , SS 304 Stock pot with lid thick base 5mm sides- 18 gauge80 Litre 50 KG , SS 304 Stock pot with lid thick base, 5mm sides- 18 gauge60 Litre 40 KG , SS 304 material Saucepan with lid , SS 304 Fry pan , Handi with lid100 L , Handi with lid75 L , Handi with lid50 L , Handi with lid25 L , Lagan copper handi , SS 304 pressure cooker , SS 304 kadai 20 L , Ss kadai 25 L , Ss kadai 40 L , SS 304 storage containers small , GN pan SS 304 Food storage container with lid 1-1 8 inch , GN pan SS 304Food storage container with lid1-1 6 inch , GN pan SS304Food storage container with lid 1-1 4 inch , Ss 304 measuring jug 0.5l , Ss 304 oil dispenser 2l , Stainless steel water jug with lid

Description: CATEGORY: Steel door confirming to IS 1038 1938 of size 900mm x1800mm. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 45 x 5mm thick , Brick Trowel Steel 305 mm , Brick Hammer with handle , Aluminimum straight edge 50mm , Plaster Trowel , Galvanised Iron Pan Mortar Tasla , Fish line best quality , Plumb Bob Iron , Rammer Earth with 6 feet long hard wooden Handle , Picks Axes with Chiesel and Point ends Kudali 14 CP , Showel Square Nose 14 Gauge , Phowrah with hard wooden , Painting Brush 100 mm , Multipurpose Non Slip Rubber Reusable Gloves , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Earthing Electrode Prefabricated gel Earthing electrode of pipe in pipe technology. . , GI Pipe 100 mm dia med grade , Back filled compound , MS earth pit cover of size 30 cm x 30 cm with handle , Aluminium strip of size 25mm x 3mm 9.00m long , Iron spikes 16 inch long complete as directed and specified by buyer , GI strip of size 32 x 6mm 3.00m long , GI nipple 20mm dia and 10cm long IS 1879 , GI reducer socket 40x20mm ISI marked , Lightning air terminal A copper tube 150 cm long x 25 mm dia with five copper prongs of length , MS clamp 40x2mm with nut and bolt complete , GI wire 12 gauge conforming to IS 2062 1991 , Earth Augur one per five LC , PVC Pipe 3m long 6 inch dia , User manual , Tester set Meger for carrying out serviceability check , GI Pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia welded with MS plate of size 100mm x 100mm x 4mm thick , Manufactured Sand M sand confirming to IS 383-2016 Specifications for coarse and fine aggregates , GI Pipe 40 mm bore 2M long as per IS 1239 , 50 mm bore GI Pipes sleeve , Crystaline Condcutive Mixture CCM , Fire Extinguisher 6 kg ABC MAP 90 along with its accessories

Description: 1] Sej 52 Kg Tongue Rail (three Nos.), 2] Sej 52 Kg Stock Rail ( Four Nos.), 3] Sej 60 Kg Tongue Rail (two Nos.), 4] 52 Kg Cms Crossing Check Rail 1 In 12 (ten Nos.), 5] Switch/ Tongue Rail 52 Kg 1 In 12 (8 Nos.), 6] Trap Switch Rail 52 Kg 1 In 8.5 (two Nos.),7] Attachment Rail 52 Kg Pieces - Ten Nos. (1.41 Metre.), 8] Check Flat (one No.), 9] Fabricated 90 R Check Rail For Lc - 15 Nos (54.51 Metres), Improved 52 Kg, 10] Single Gap Sej 80 Mm Tongue Rail (two Nos.) & 11] Stack Rail (two Nos.) 12] With Check Rail. ( Two Nos.) - Total Qty - 15.303 Mt As Is Where Is Basis, [condemned, Unserviceable, Released, Class - Iii], Custodian : Sr. Section Engineer/p.way/nagercoil Junction [ncj]., S.1539 No. 2024-25-593628 Dtd.22.01.2025, Location : Aralvaymoli [aay] Yard Km 304/000-200 Lhs Between Nagercoil Junction [ncj] - Tirunelveli [ten] Station., Note : 1] Delivery To Be Made On Actual Weighment Basis. 2] When Crane Loading Is Not Possible, The Purchase [by Engaging His Own Labourers] Is Permitted To Cut Rails To Loadable Sizes Of Not Less Than 150 Kgs., 3] In All Cases, I.e. Crane Loading/ Manual Loading, When The Length Of Rails Exceeds 5 Metres Length, The Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails To Convenient Lengths Not Less Than 2.5 Meters., 4] Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails And Hand Over The Non - Ferrous And Excess Quantity To The Custodian., Special Conditions : 1) Jurisdiction- The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/ Arbitration/ Conciliation Proceedings And The Place Of Arbitration/ Conciliation, If Any, Shall Be In Chennai Only., 2) Forfeiture Of Bsv Payment Along With Emd.-in Southern Railway Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable., 3) Part Delivery-part Delivery Is Not Permitted Against Part Payment On Southern Railway., Nfs/side Assets : 1] Nfs As Per Tms Jsos & Ds 8. [p.l. No. 98011224 [15], Hsn Code : 720429, Gst - 18 % On Fcm], Item : Weighment Rails.