Fabrication Tenders

Description: CATEGORY: SITC of factory built floor mounted chilled water double skin type horizontal vertical air handling units , 14200 CFM 65 mm wg static pressure 33.2 TR , 12000 CFM 65 mm wg static pressure 28.3 TR , 11000 CFM 65 mm wg static pressure 24.4 TR , 10190 CFM 65 mm wg static pressure 21.4 TR , 9600CFM 65 mm wg static pressure 27.7 TR , 9500 CFM 65 mm wg static pressure 23.8 TR , 9000 CFM 65 mm wg static pressure 27.7 TR , 200mm dia. 32 mm thick insulation , 150mm dia.32 mm thick insulation , 125mm dia. 32 mm thick insulation , 100 mm dia. 32 mm thick insulation , 80 mm dia. 32 mm thick insulation , 65 mm dia. 32 mm thick insulation , 50 mm dia. 32 mm thick insulation , SITC of valves strainers gauges in the chilled water plumbing , 65 mm dia. , 50 mm dia. , BALANCING VALVE WITH BUILT IN MEASURING FACILITY , Y STRAINER of Ductile CI Body flanged , Providing and fixing in position the industrial type pressure gauge with gun metal brass valves etc. , Providing and fixing in position the mercury in glass industrial type thermometer , Providing and fixing in position Air Vent for Automatic purging etc. , SITC of electronic self balancing pressure independent type dynamic balancing valve , 40mm dia , SITC of site fabricated GSS sheet metal rectangular round ducting , Thickness 0.80 mm sheet , Thickness 1.00 mm sheet , Thickness 1.25 mm sheet , Supply and fixing of acoustic lining of supply , Providing and fixing 40 mm dia , SITC of 4C x 4 Sqmm 1.1kV grade XLPE , Supplying and making end termination with brass , SITC of 3C x 1.5 Sqmm armoured Copper communication cable , Providing and fixing 6 SWG dia. G.I. wire , Dismantling of existing AHUs of different capacities , Dismantling of existing UVGI system , ismentalling of existing piping valves of different floor AHUs , 150 mm dia. , 125 mm dia. , 100 mm dia. , 80 mm dia.

Details: CATEGORY: ASSISTANCE FOR SAFETY and Mech SERVICES unit rate to be calculated based on semi skilled rate margins , MAINTENANCE OF DCP FIRE EXTINGUISHER 9KG , SERVICING OF FIRE EXTINGUISHER 25KG AND 75KG , SERVICING OF FIRE EXTINGUISHER 1KG TO 4.5KG , REFILLING OF CO2 GAS 2KG TO 6.8KG , REFILLING OF FIRE EXTINGUISHER 9KG , DCMP MOCK DRILL ARRANGEMENTS , FOAM POURER TESTING , HYDROTESTING FIRE HOSE , SUPPLY OF DRY CHEMICAL POWDER , SUPPLY AND FIXING HOSE,DCP,9KG , FABRICATION, WELDING AND ERECTION OF STRUCTURAL STEEL , SUPPLY AND INSTALLATION SAFETY CLIP AND Safety Pin , SUPPLY AND INSTALLATION DISCHARGE HOSE FOR 25KG DCP , SUPPLY AND INSTALLATION DISCHARGE HOSE FOR 75KG DCP , SUPPLY AND INSTALLATION DISCHARGE HOSE FOR 4.5KG CO2 DCP , SUPPLY AND INSTALLATION DISCHARGE HORN,4.5KG CO2 DCP , SUPPLY AND INSTALLATION DISCHARGE HORN,2KG CO2 DCP , ULTRASONIC TESTING OF FIRE EXTINGUISHER , SUPPLY AND INSTALLATION LUMINOUS WIND SOCK , SUPPLY AND INSTALLATION CONNECTING HOSE , SERVICING OF SPRINKLER NOZZLE , SERVICING OF FIRE HOSE , WELDING OF PIPE ALL DIA , SUPPLY AND INSTALLATION OF BUTTERFLY VALVE , SUPPLY AND INSTALLATION COUPLING WASHER , CLEANING OF STRAINER 6 INCHES AND ABOVE -PRODUCT LINE , CLEANING OF STRAINER UPTO 6 INCHES - PRODUCT LINE , SUPPLY AND INSTALLATION OF 80MM CI BUTTERFLY VALVE , SUPPLY OF SPARK ARRESTOR , SUPPLY OF FIRE HOSE,15MT , SUPPLY AND INSTALLATION OF SPRINKLER NOZZLES , SUPPLY AND INSTALLATION FIRE HOSE BOX GLASS , SUPPLY OF JET NOZZLE , SUPPLY AND INSTALLATION OF HOSE BOX , REFILLING OF CLEAN AGENT CYLINDER , SUPPLY AND INSTALLATION OF HYDRANT CAP , CLEANING OF STRAINER UPTO 6 INCHES FOR HYDRANT LINES , CLEANING OF STRAINER 6 INCHES AND ABOVE FOR HYDRANT LINES , ADDITIONAL MANPOWER ASSISTANCE , HYDROTESTING OF PIPELINE , SUPPLY, APPLICATION AND WRAPPING FOR UNDERGROUND PIPELINE , TESTING AND CALIBRATION OF TSV and SRV , TESTING AND SERVICING OF PV VENT,3 INCH , TESTING AND SERVICING OF PV VENT,6 INCH , HIRING OF HYDRA CRANE , Pipe Modification Product Drain , HIRING OF JCB , SUPPLY AND INSTALLATION OF GLAND ROPE FOR Valves , SUPPLY AND FILLING OF SILICA GEL , HYDROTESTING OF UNLOADING HOSE , CLEANING AND GREASING OF GATE VALVE UPTO AND INCLUDING 6 INCHES , CLEANING AND GREASING OF GATE VALVE 8 INCH AND ABOVE , SERVICING OF GEAR OPERATED VALVES , MAINTENANCE OF SWING LADDER , REPAIRING OF SWIVEL JOINT , SUPPLY AND INSTALLATION OF BOLT AND NUTS , SUPPLY AND INSTALLATION OF GASKET SHEET , Supply of Structural Steel Erection Aligment AND Welding , REFILLING OF SCABA CYLINDER 200BAR AND 300BAR , Product Tank Cleaning AG Tank , Removing of Dead Stock AG AND UG Tanks , Product Tank Cleaning UG Tank , SERVICING OF DELUGE VALVE

Details: Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 016 Sea Water Leakage Observed View Multiple Pin Holes From Ac System Pipe Line Pipe Line To Be Fabricated Renewed All Inway Job Include Removal Of Fitted .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 017 Black Water Leakage Observed Stp Pipe Line View Pipeline Material Deteriorated Perished Pipeline To Be Renewed Repaired As Per Sample Inway Jobs Includ.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 012 Navigation Communication Battery Cover For Protection From Rain Moisture On Flag Deck To Be Fabricated Mat Al Length 100 Cm Height 30cm; Service Provi.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 018 Stbd Gear Box Sea Water Cooling Line A Sea Water Leakage Observed From Pin Holes Of Stbd Gear Box Cooler Cooling Pipe Line Pipe Line To Be Chemically .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 013 Main Broadcast Not Producing Adequate Power Output From Speakers Suspect Amplifier Interface Module Malfunctioning Defect To Be Rectified And Proved Fo.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; H 023 Abnormal Sound And Vibration Observed Whilst Starting Ships Diving Air Compressor Diving Air Compressor To Be Overhauled Defect To Be Rectified And Pro.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 014 Wire-mess Fencing For Main Engine And Das Batteries Deteriorated Same To Be Repaired Mat Al Length 2m Height 1m; Service Provider

Details: Description:- Supplying, Installation, Testing And Commissioning Of Electric Driven Main Fire Pump compatible To Deliver 1620 Lpm At A Head Of 88 Mtr Suitable For Automatic Operation And Consisting Of following, Complete In All Respects, As Required : A. Horizontal Type, Multistage, Centrifugal, Split Casing pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is 1520. B. Suitable Hp Squirrel Cage Induction Motor, Tefc, Synchronous Speed 1500 Rpm, Suitable For operation On 415 Volts, 3 Phase 50 Hz, Ac Supply With Ip 55 Protection For Enclosure, Horizontal Foot mounted Type With Class-'f' Insulation, Conforming To Is-325. C. M.s. Fabricated Common Base Plate, coupling, Coupling Guard, Foundation Bolts Etc. As Required. D. Suitable Cement Concrete Foundation duly Plastered With Anti Vibration Pads.

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.

Details: Supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic Interlocking-msdac Based Automatic Block Signalling System Between Luni Jn And Bishangarh Station In Connection With Doubling Of Ln-smr-bldi Section Of Jodhpur Division Of North Western Railway. The Work Involves Provision Of New Electronic Interlocking At Satlana, Dudia, Dundara, Ajit, Bamsin,rakhi, Mokalsar, Balwara,bishangarh Stations And Samdari Jn. Along With Fifteen Numbers Of Auto Signalling Huts And Modification In Existing Medha Make Ei At Luni Jn. Provision Of Msdac Along With Associated Works Like Trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi Pipes, Supply-installation Of Point Machines, Apparatus Cases, Signals, Track Circuit Equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire Alarms, Passenger Amenity Telecom Items Etc

Details: Description:- Css-1: Supply, Install, Test And Commission Of Css Substation Enclosure Non Walk- In type Fabricated By Gi Steel With Accessories (1) 11kv, 630a, 21ka/3sec. Ring Main Unit Consisting Of 1no. Incoming Fixed Vcb (manually Operated) & 2nos. Outgoings Fixed Vcb/sf-6 (manually Charging & closing) (2) 250kva, 11/0.415kv Crt Dry Type Transformer (3) On Load Changeover Switch Capacity 4- pole, 415v, 630a (4) Lt Panel Shall Consist Of 1no. Incoming Of 400a, 4pole, Mccb & Outgoings Of 4 nos. 4pole 100a Mccb And 1 Nos. 4pole, 250a Mccb (5) Apfc Panel Of 70kvar. Note: Foundation Of css Is Taken Separately. As Per Specification

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Earth excavation by mechanical means Hydraulic excavator or manual means for foundation substructures plinth beam cess pits trenches all.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Providing and laying plain cement concrete 1 is to 2 is to 4 using 20mm maximum size graded aggregates including mechanical mixing transp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Providing and laying Reinforced cement concrete M30 using 20mm maximum size graded aggregates including mechanical mixing transporting et.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Providing straightening decoiling wherever necessary bending cutting binding and fixing in position steel reinforcement TMT bars of Fe 50.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Supplying fabricating erecting and fixing in position at all levels centering and shuttering to correct line and levels including strutti.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Providing and constructing 200mm thick precast concrete solid blocks masonry wall in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 7 Leveling the area to the required gradient in all types of soil including cutting the mounds wherever required for filling the low lying .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 8 Providing plastering to the external surfaces of brickwork concrete at all elevations in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 9 Dismantling of RCC works at all levels by manually by mechanical means including Cutting and stacking of steel reinforcement bars and dis.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 10 Demolishing Stone rubble masonry In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent stru.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 11 Dismantling brick work In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent structures inc..