Fabrication Tenders

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.

Details: Supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic Interlocking-msdac Based Automatic Block Signalling System Between Luni Jn And Bishangarh Station In Connection With Doubling Of Ln-smr-bldi Section Of Jodhpur Division Of North Western Railway. The Work Involves Provision Of New Electronic Interlocking At Satlana, Dudia, Dundara, Ajit, Bamsin,rakhi, Mokalsar, Balwara,bishangarh Stations And Samdari Jn. Along With Fifteen Numbers Of Auto Signalling Huts And Modification In Existing Medha Make Ei At Luni Jn. Provision Of Msdac Along With Associated Works Like Trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi Pipes, Supply-installation Of Point Machines, Apparatus Cases, Signals, Track Circuit Equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire Alarms, Passenger Amenity Telecom Items Etc

Details: Description:- Css-1: Supply, Install, Test And Commission Of Css Substation Enclosure Non Walk- In type Fabricated By Gi Steel With Accessories (1) 11kv, 630a, 21ka/3sec. Ring Main Unit Consisting Of 1no. Incoming Fixed Vcb (manually Operated) & 2nos. Outgoings Fixed Vcb/sf-6 (manually Charging & closing) (2) 250kva, 11/0.415kv Crt Dry Type Transformer (3) On Load Changeover Switch Capacity 4- pole, 415v, 630a (4) Lt Panel Shall Consist Of 1no. Incoming Of 400a, 4pole, Mccb & Outgoings Of 4 nos. 4pole 100a Mccb And 1 Nos. 4pole, 250a Mccb (5) Apfc Panel Of 70kvar. Note: Foundation Of css Is Taken Separately. As Per Specification

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Description: CATEGORY: Food thermometer , Lactometer , Refrigerator freezer Thermometer with hang stand , Heavy duty Plastic palle , Heavy duty Plastic crates for fruits and vegetables foldable , Todd Box for milk , Menu display board , Pin notice board , Colour coded garbage bins wet waste dry waste , Hand wash soap dispenser , Hand towel dispenser , Wet sign board , Cutlery sterilizer , Spoon sterilizer , SS 304 Commercial tawa , Tawa round , Strainer , Ms rack 6 tiers square pipe leg flat shelf with 3 side 2 inch brim , SS 304 masala box 12 , Ss 304 masala box 6 , Rice boiler , Ss commercial high pressure steam cabinet no boiler required , Idli steamer , Cabinet 2 door , SS Storage cupboard for cutlery and crockery , Commercial hand blender , Commercial beach juicer , Commercial sandwich griller , SS 304 Salamander oven , SS 304 Automatic Juice Machine , Heavy duty mixer , Bread toaster , Uv sterlizer wall mounted for knives , Soup container with lid , Salad Counter Fabricate Salad counter cum service counter Top 16gauge SS 304 grade sheet covering 20swg SS 304 grade sheet , Milk -tea dispenser , Juice dispenser , Food warmer , Chinese wok , SS 304 Stock pot with lid thick base 5mm sides- 18 gauge100 Litre 60 KG , SS 304 Stock pot with lid thick base 5mm sides- 18 gauge80 Litre 50 KG , SS 304 Stock pot with lid thick base, 5mm sides- 18 gauge60 Litre 40 KG , SS 304 material Saucepan with lid , SS 304 Fry pan , Handi with lid100 L , Handi with lid75 L , Handi with lid50 L , Handi with lid25 L , Lagan copper handi , SS 304 pressure cooker , SS 304 kadai 20 L , Ss kadai 25 L , Ss kadai 40 L , SS 304 storage containers small , GN pan SS 304 Food storage container with lid 1-1 8 inch , GN pan SS 304Food storage container with lid1-1 6 inch , GN pan SS304Food storage container with lid 1-1 4 inch , Ss 304 measuring jug 0.5l , Ss 304 oil dispenser 2l , Stainless steel water jug with lid

Description: CATEGORY: Steel door confirming to IS 1038 1938 of size 900mm x1800mm. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 45 x 5mm thick , Brick Trowel Steel 305 mm , Brick Hammer with handle , Aluminimum straight edge 50mm , Plaster Trowel , Galvanised Iron Pan Mortar Tasla , Fish line best quality , Plumb Bob Iron , Rammer Earth with 6 feet long hard wooden Handle , Picks Axes with Chiesel and Point ends Kudali 14 CP , Showel Square Nose 14 Gauge , Phowrah with hard wooden , Painting Brush 100 mm , Multipurpose Non Slip Rubber Reusable Gloves , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Earthing Electrode Prefabricated gel Earthing electrode of pipe in pipe technology. . , GI Pipe 100 mm dia med grade , Back filled compound , MS earth pit cover of size 30 cm x 30 cm with handle , Aluminium strip of size 25mm x 3mm 9.00m long , Iron spikes 16 inch long complete as directed and specified by buyer , GI strip of size 32 x 6mm 3.00m long , GI nipple 20mm dia and 10cm long IS 1879 , GI reducer socket 40x20mm ISI marked , Lightning air terminal A copper tube 150 cm long x 25 mm dia with five copper prongs of length , MS clamp 40x2mm with nut and bolt complete , GI wire 12 gauge conforming to IS 2062 1991 , Earth Augur one per five LC , PVC Pipe 3m long 6 inch dia , User manual , Tester set Meger for carrying out serviceability check , GI Pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia welded with MS plate of size 100mm x 100mm x 4mm thick , Manufactured Sand M sand confirming to IS 383-2016 Specifications for coarse and fine aggregates , GI Pipe 40 mm bore 2M long as per IS 1239 , 50 mm bore GI Pipes sleeve , Crystaline Condcutive Mixture CCM , Fire Extinguisher 6 kg ABC MAP 90 along with its accessories

Description: 1] Sej 52 Kg Tongue Rail (three Nos.), 2] Sej 52 Kg Stock Rail ( Four Nos.), 3] Sej 60 Kg Tongue Rail (two Nos.), 4] 52 Kg Cms Crossing Check Rail 1 In 12 (ten Nos.), 5] Switch/ Tongue Rail 52 Kg 1 In 12 (8 Nos.), 6] Trap Switch Rail 52 Kg 1 In 8.5 (two Nos.),7] Attachment Rail 52 Kg Pieces - Ten Nos. (1.41 Metre.), 8] Check Flat (one No.), 9] Fabricated 90 R Check Rail For Lc - 15 Nos (54.51 Metres), Improved 52 Kg, 10] Single Gap Sej 80 Mm Tongue Rail (two Nos.) & 11] Stack Rail (two Nos.) 12] With Check Rail. ( Two Nos.) - Total Qty - 15.303 Mt As Is Where Is Basis, [condemned, Unserviceable, Released, Class - Iii], Custodian : Sr. Section Engineer/p.way/nagercoil Junction [ncj]., S.1539 No. 2024-25-593628 Dtd.22.01.2025, Location : Aralvaymoli [aay] Yard Km 304/000-200 Lhs Between Nagercoil Junction [ncj] - Tirunelveli [ten] Station., Note : 1] Delivery To Be Made On Actual Weighment Basis. 2] When Crane Loading Is Not Possible, The Purchase [by Engaging His Own Labourers] Is Permitted To Cut Rails To Loadable Sizes Of Not Less Than 150 Kgs., 3] In All Cases, I.e. Crane Loading/ Manual Loading, When The Length Of Rails Exceeds 5 Metres Length, The Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails To Convenient Lengths Not Less Than 2.5 Meters., 4] Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails And Hand Over The Non - Ferrous And Excess Quantity To The Custodian., Special Conditions : 1) Jurisdiction- The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/ Arbitration/ Conciliation Proceedings And The Place Of Arbitration/ Conciliation, If Any, Shall Be In Chennai Only., 2) Forfeiture Of Bsv Payment Along With Emd.-in Southern Railway Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable., 3) Part Delivery-part Delivery Is Not Permitted Against Part Payment On Southern Railway., Nfs/side Assets : 1] Nfs As Per Tms Jsos & Ds 8. [p.l. No. 98011224 [15], Hsn Code : 720429, Gst - 18 % On Fcm], Item : Weighment Rails.

Description: 12160ms24i, 98050011, Quantity- 50.765 Mts. Scrap Condemned Unserviceable Ms-ci Signal Interlocking Materials Consisting Of Levers, Rods, Ms Campus Rollers Of Molb, Molb Weights, Molb Booms, Signal Tubular Post, Roller Trestle, Stop Boards, 33 Mm Rods, Signal Arms, Gi And Ms Wires, Lc Gate Pipes, Gate Structures, Ladders, Angles, Channels, Joists, Roller Stands, Electric Poles, Cable Termination Box, Direct Type Lever Frame, Sa 1914 Type Trays, Sm Slides, Ssi Termination Rack, Control Panels, Signal Booms, Boom Locks, Cable Termination Rack, Adjustable Crank, E Type Lock, Cable Marker, Ground Connection Rods, Fuse Unit, Power Racks, Cam Path, Gear Box, Signal Reverser, Ground Lever Frame, Molb, Eolb Pedestal, Telecom Charger Body, Wire Adjustment Screws, Molb Compass Roller, Gate Weights, Cls Tubular Post, Surface Base, Nuts, Bolts, Rounds, Turnout Wheels, Eye Joints, Point Machine Covers, Clamps, Signal Buckets, Pulleys, D.w.diversion Wheel, Gate Control Panel, Calling On Unit, Gear Box Assembly With Clutch, Winch, Offset Brackets, H.p Lock, Chequered Plates, Ptb, Location Boxes, Rkt, Axle Counter Coil Fixing Plate, Shunt Signals, Route Arm, Route [1 Way, 2 Way, 3 Way And 4 Way], Ib Hut Cut Parts, Ms Electrical Point Detector, Junction Type Route Indicator, Route Indicators, Structures, Casing Structures, Ci Bases, Gear Wheels, Flats, Cable Termination Base, U- Brackets, Ci Weights Of Booms, Fabricated Posts, Cls 2, 3 And 4 Aspect Units, Trestle, Sge Block Instrument, Y-crank, Stands For Wheel Tension Measuring Devices Of D.w Clutch, Lock Bar Clips, Drum Clock, Ec Boxes, Relay Racks, Tlj Boxes, Foundation Shoe, Ekt, Pd Clamps, Galaxy Stand, Meeting Posts, Signal Lamp Structures, Point Rods And Other Similar Signal And Interlocking Scrap Material Of Sorts And Sizes, With Or Without Attachments Including Negligible Nf Attachments. Note: Private Crane Permitted For Loading. Note- Nf Attachments Are Approximately 2 Percent Of Lot Quantity. Location- Bin No- 160, Left Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Mv Act 1988.

Description: CATEGORY: UPVC bend , 15mm Brass stop cock Conforming to IS-8934 1978 , 3 Layer of PP R Polypropylene random copolymer Pipes SDR 7.4 , 20mm elbow suitable for 20mm dia PPR pipe conforming to IS 1239 1989 , 20mm Socket suitable for 20mm dia PPR pipes Conforming to IS 1239 1989 , 20mm equal Tee suitable for 20mm dia PPR Pipe conforming to IS 1239 1989 , 20mm union suitable for 20mm PPR pipes Conforming to IS 12391989 , PPR End Plug 20mm conforming to IS 1239 1989 , PPR pipe clamp suitable for 20mm piping , Bib cock 20 mm with flange conforming to IS 8931 1978 , GI reducer socket 15 obliq 20mm , GI reducer elbow 15 obliq 20mm , Pre fabricated Man hole cover 6 feet x 4 feet made of ISA 40x40x6mm frame , Rotational moulded polyethylene water storage tank double layer , PPR tank connector 20mm with Check nut and washer , White lead safeda , Thread cotton ball 100 m long , Vitreous china wash Hand Basin WHB white flat back size 550x400 mm , 20mm dia pillar taps of PTMT of any colour high pressure screwed for iron pipe , 110mm dia UPVC SWR pipe single socketed pipe Type A in any length with rubber joint , 600x450mm size looking mirror mounted on PVC with PVC shelf assembly including all fittings all as specified , Drilling machine portable type electrically driven , Aluminum straight edge 50mm square 2mm thick 1800mm long , Wooden Flat Gurmala , Hand rivet gun machine , Tile cutter machine with 6 spare blades each , Tasla Iron 18 inch , Cutting plier insulate 6 inch , Screw driver 12 inch with insulated plastic handle , Adjustable spanner 12 inch , Hacksaw frame with 2 blade , Hand gloves insulated with 2 rubber , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30m , Mason trowel Karchi , Axepicks with wooden handle , Fawda with wooden handle , Rammer with wooden handle of wt 5 Kg , Pipe wrench 12 inch , Pipe wrench 18 inch , Aluminum spirit level 6 inch , Brick Line Best quality , PPR Welding electrode 20 to 63mm , Plumbob 250gms , Tape measuring metallic 5m

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988