Drawer Tenders

Details: Description :set Of Quick Coupling For Main Transformer Of 3 Ph. Locomotives As Per Clw Specification No.clw/es/3/0456, Alt-i Or Latest And Confi rming To Clw Drawing No.clw/es/3/sk-4/0456, Alt-c Or Latest Consisting Of The Following Two Items. 1) Male Coupling As Per Abb Id No. Hstn 4220 23p003 Qty/set. 01 No. 2)female Coupling As Per Abb Id No.hstn 422023p0013 Qty/set.01 No. [ Warranty Period: 30 Months After The Date Of delivery ] ]

Details: Description :manufacture And Supply Of 11200 Mm Curved Switches With Zu1 -60 /60e1a1 Thick Web Tongue Rail For 1 In 16 Turnout Bg(1673 Mm) F or 60kg (uic)/60e1 On Psc Sleepers To Rdso Drg No. T- 7076(alt-3) Or Latest Alteration If Any With All Fittings As Per Attached Annexure-a And Conformi ng To Irs-t-10-2023. (the Alt. In Drawings & Specification Issued By Rdso Up To Ten Days Prior To Tender Opening Date Shall Be Applicable In This Tende r) [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: CATEGORY: Pre filter pump Assembly complete with motor , Starter or control Panel , Gauge assembly board with suction and discharge pressure gauge pipes isolation cocks etc , Loose fittings and instrumentation as applicable , Shock mounts with center and side holding down fasteners , Flexible pipes or bellows for all equipments interfaces with external or loose supplied system , Electrical items for connectorisation termination lugs glands etc , First submission on binding drawing , Documentation hard copy , Documentation softy copy , IETM documentation , Service of service engineer , Preservation and De preservation , Commissioning spares , On boards spares , Standard and Special Tools , Training and Training material

Details: Description :supply Installation And Commissioning Of Complete Lt Driving Wheel Assembly For Eot Crane No. 475/87 Capacity 35 t/10t. Wheel Od: 680mm X Thick 160mm. Axle Od: 150mm X 520mm Lg. Bearing Housing, Cover & Bearing No. 22226. Liquid Dye pentrant Test, Dimension Report, Chemical And Mechanical Report With Inspection Certificate From Govt. Approved Test House Or Na bl Accredited Lab Must Accompany With Supply. Details As Per The Annexure And Drawing Attached. [ Warranty Period: 12 Mont hs After The Date Of Delivery ] ]

Details: Description:- Manufacturing,supplyingandinstallationofrubberizedlevelcrossingpadsof approved Quality And Specification With Railway Track By Suitable Clamping Arrangements To Make A rubberized Road. The Road Surface Is Tobe Prepared By Using Multiple Set Of Rubber Pads Of Length 1.20m Each And Each Set Consists Of 2 Nos Of Rubber Pad Placed Inside The Running Rails And 2 Nos outside The Running Rails Resting On Rcc Edge Beam At The Edge To Retain The Assembly As Per approved Drawing. Cement And Steel For This Will Be Supplied By Contractor And Is Included In The rate.no Separate Payment Shall Be Made. A) 60kg Rails Track Note: Rubberized Surface Pads To Be procuredfromrdsoapprovedsourceandtobelaidundersupervisionofmanufacturer's representative.

Details: Description :supply Installation And Commissioning Of Complete Lt Driving Wheel Assembly For Eot Crane No. 475/87 Capacity 35 t/10t. Wheel Od: 680mm X Thick 160mm. Axle Od: 150mm X 520mm Lg. Bearing Housing, Cover & Bearing No. 22226. Liquid Dye pentrant Test, Dimension Report, Chemical And Mechanical Report With Inspection Certificate From Govt. Approved Test House Or Na bl Accredited Lab Must Accompany With Supply. Details As Per The Annexure And Drawing Attached. [ Warranty Period: 12 Mont hs After The Date Of Delivery ] ]

Details: Wheel Set Earthing Equipment To Rcf Spec.no.edts-101, Rev-c, Amd-3, Corrrige Ndum-9.--- Note: 1. Packing Instructions: Pi091ver 3.0 2. 30 % Of Po Qty. To Be Supplied In Lhb W Ard And Balance 70 % Po Qty. To Be Supplied In Shell Division Ward. Special Condition : Firm Should Proc Ure Hexagon Head Screw M8 X 30 According To Rdso Drg No. Cg-15070, Alt-'1'and From The O Em/authorised Agents/dealers Of The Make As Mentioned In The Icf Drawing No. T-0-2-619 (latest Alter Ation)

Details: Supply And Installation Of One Coach Set Of Seats And Berths With Hardwar Es For Lwscn Pp Coach To Drawing 755-6-1-004, Col-1, Alt-b, (except Items 19,20,24,25,26 An D Their Respective Hardwares Required For Fitting) Cushioning Material Shall Be Of Pu F Oam Conforming To Rdso Specification Rdso/2007/cg-04, Rev.01 Or Latest. Note: Firm Has T He Option For Offering Seats And Berths Cushion With Lower Density Of 65 Plus Or Minus 5 Kg/m3 Conforming To Spec.rdso/2007/cg-04,rev-01 Or Latest Also. Requirements And Col Our Of Upholstery Shall Be As Per Letter No.md/d/ss/103b Dated-16.07.2024 And Letter No. Md/ss/lhb/ac/103/f Dated-15.07.2024 & Md/d/ss/103b Dt.10.08.2024 Respectively. Colour Of T He Aluminium Tub And Aluminium Moulding Shall Be As Per Letter No.md/ss/lhb/ac/103/f Da Ted-12.09.2024 Upholstery Sample To Be Submitted To Icf Design For Approval Along With Test Certificates. Please Visit Icf Vendor Portal For Downloading Drawing Https://vp.icf.gov.in/vendt Endordetnew.php Using Key: 0725gid0tof1829 [ Warranty Period: 120 Months After The Date Of Deli Very ] ]

Details: Description :direct On Line Starter With 2 Sets Of 3 Pole / 4 Pole Contactors (2 Sets Ac Contactor Coils, 25 A mp Each), Each Set Controlled Separately By 415v. 50hz Ac Contactor Coils. One Set Of Contactor Coil Is To B e Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Thro ugh Another Inching Button To Control The Reverse Direction Of 7.5 Hp, 3phase, 50hz, 415volts, Ac Motor. Th ere Must Be Electrical Interlocking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each of Above Push Buttons Should Have One Normally Closed Auxiliary Contact And One Stop Push Buttons Are Re quired. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug and Socket With Locking Arrangement As Shown In Schematic Drawing No. 1736/23 And 1737/23 Alt.-1. Each starter Is To Be Provided With 2 Nos. Power Plug And Sockets And 2 Nos. Of Control Plug And Sockets. Maxim um Dimension Of The Starter Should Not Excessed 280mm (b) X 360mm (l) X 162mm (t) Irrespective Of Di mension Given In Drawing. Material Specification: Is: 13947 Pt.-4 Sec.-1, 1993, Make: Bch Or Siemens Or H avells Or Jeevan Or Schneider Or L&t. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Supply Of Roof Mounted Ac Package Unit Rmpu Type-ii For Lhb Power Car, Con sisting Of Rmpu With R407-c Refrigerant -01 No. To The Rdso Specification No. Rdso/pe/spe c/ac/0061-2005 Rev-1 And Microprocessor Controller Unit- 01 No. To The Rdso specification No.rdso/pe/ Spec/ Ac/0139-2009 Rev.1, Type - I Complete With Accessories As Pe r Scope Of Supply As Envisaged In The Rdso Specifications And Without Air Bellows (suppl y Air, Fresh Air And Return Air). Note: 1. Rdso Drawing No Rdso/pe/sk/ac/0069-2004, Rev-3 O r Latest Shall Be Followed. 2. Standardisation Of Location Of Ntc, Ohp & Esti Sensors Sh all Be As Per Rdso Modification Sheet No Rdso/pe/ms/ac/0087 (rev-0)-2022. 3. Mounting Det ails For Rmpu Switch Panel Shall Be Provided As Per Drawing No.icf/sk3-7-2-062 Alt- A. 4. Dif ferential Pressure Switch (dps) Based Heater Protection System For Rmpu Shall Be Provided As Per Rds o Modification Sheet No. Rdso/pe/ms/ac/0089 (rev-0)-2022. 5. Packing Instruction As Per Pi-026 ver.1.0 [ Warranty Period: 30 Months After The Date Of Delivery ] ]