Drawer Tenders

Description: CATEGORY: Rectangular Structural Steel Tube 60 x 40 x 4 mm Thick IS_8500_1991 Gde Fe 540 , Dia 70 mm Round Alloy Steel IS_11185_1984_Gde 40 Cr4Mo3 , Alloy steel flat 30 mm Width x 6 mm Thick IS_5517_93 Gde _ 25 Cr13 , Dia 55 mm Round bar Alloy Steel IS_11185_1984_Gde 40 Cr4Mo3 , M S Welding Rod 3_15 mm x 350 mm Long , M 5 x 1 10 mm Long Round screws , Paint Enamel OG , Thinner , Paint Red Oxide , Grease Nipple M 10 x 1 , Cold rolled steel sheet 1mm thick IS_513_2008_ Gde CR3 MM 900mm x 1200mm _one sheet_ , Snap head Rivet 6mm dia x 12mm long IS_2155_1962 , Hexagon socket grub screw M8 x 12mm long_ Type _E_ IS_6094 _ 1971 , A finished _Coupling Body_ to be procured through L_C_ As per sample and Drawing_ Drawing No _ A3_515_SMP_57263 , Aluminium tube 8mm OD X 1mm thick IS_738_77 Gde _52000 _O_ Condition 14_68 Kgs , Steel Round Bar 14mm Dia IS_2004_1991 Gde _45 c8 class_4 , Aluminium Round Bar 14mm Dia IS_733_1983_Gde 54300 Condition _M_ Mtrs 2 , Steel Hex Bar A_F 19mm IS_2004_1991 Gde _45c8 class _4 , Paint Primer IS_1874_68_ JSS_3_47_13 , Paint Enamal Yellow IS_2932_ JSS_8010_1 , Tig Welding Rod 2mm Dia x 1000mm Long , Aluminium alloy tube 8 mm dia x 1mm thk Unit length 1500 mm IS_738 Gde 19500 , Steel round bar 14mm dia IS_9550 Gde 45C8 Mtrs 6_60 , Steel hexagon bar 19mm A_F IS_ 9550 Gde 45C8 8_10 , Aluminium primer Zinc chromate , Plastic cover clear 80 microns x 50 mm width , Paint Enamal Yellow

Details: Description :set Of Ermeto Fittings For Plumbing Of Lhb Buffet Coaches., As Per Drawing: M plefbuplubfur Version 3, Packing Instruction: Set Of Ermeto Fittings:- Each Item Of The Set S hould Be Packed Individually After Covering The Threaded Portion With Suitable Cap To prevent Thread Damange In Bio-degradeable Polythene Packet Invariably Clearly mentioned The Part No. Of The Item On It. All The Items Of Set Then Collectivelly Packed I n Card Board Box Of Sufficent Strength, Further Tied With Suitable No. Of Nylon Strips. a Well Protected List Should Be Pasted On Each Box Bearing Purchase Order No, Pl No., description, Drg./spec./part No., Qty., Firm's Name & Address, Date Of Despatch Etc. The T ransit Damange If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After T he Date Of Delivery ] ]

Details: Revamping of Electrical system of CDO building at IGCAR,Kalpakkam. Note 1.This schedule must be read along with the drawing, Specification and scope of work (Section V) and General Specifications (Section VI) for complete interpretation of this scope of work quantitywise. 2.Items of work described in brief below are detailed under Specification of Work. The scope of work will not be estimated from the brief description of this schedule. 3.Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this Schedule or not. 4.Tenderers are advised to get acquainted with the site conditions before quoting. 5.Schedule Rate Shall be firm and Overall Conditional Discount for the Total Tendered amount will not be accepted. 6. Rate Quoted Should be inclusive of all taxes including GST. 7.All LED fittings shall be guaranteed for 5 years. Required guarantee certificate shall be obtained from the original manufacturer of the fitting.

Details: Description :adapter Assembly For Iv Coupler Zs Jumper Plug As Per Item No.8 (70mm Adapter-1no.), Item No.30 (adapter Gasket -1no.) & Item No.32 (6x30 Mm Hex Head Bolt With Nut-4nos.) Of Drawing No.lw71301 And Conforming To Rcf Spec. No. Edts-105 R ev E With Amend 1, 2 & 3 And Rdso Specification No. Rdso/pe/spec/ac/0177 (rev.1 -2013 Or Latest), Similar To S-international's P art No. Si/lhb/jpa/suba-05 (or) Maa Laxmi Industries Part No. Mli/lhb/jpa-09, Brands: Maa Laxmi/ S.international/ Prime Electroni cs/ Any Other Equivalent Makes. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :manufacture And Supply Of Glued Insulated Rail Joints 6.5 M Long G3(l) Type For 52 Kg Rails With All Fittings As Per Rdso Drg. No. T-671 alt. 13 Or Latest Alteration If Any And Specification As Per Manual Of Glued Insulated Rail Joint (revised - 2024) Or Latest If Any. (the Alt. In Drawings & specification Issued By Rdso Up To One Month Prior To Tender Opening Date Shall Be Applicable In This Tender) Note: - The Responsibility To Procure Rail s Will Solely Lie With The Manufacturer (bid Including Rail Cost/per Nos.) In Terms Of Railway Board Letter No. 2022/track-i(p)/fabricators Dt. 24.01.2022. [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 0 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Details: Description :adapter Assembly For Iv Coupler Zs Jumper Plug As Per Item No.8 (70mm Adapter-1no.), Item No.30 (adapter Gasket -1no.) & Item No.32 (6x30 Mm Hex Head Bolt With Nut-4nos.) Of Drawing No.lw71301 And Conforming To Rcf Spec. No. Edts-105 R ev E With Amend 1, 2 & 3 And Rdso Specification No. Rdso/pe/spec/ac/0177 (rev.1 -2013 Or Latest), Similar To S-international's P art No. Si/lhb/jpa/suba-05 (or) Maa Laxmi Industries Part No. Mli/lhb/jpa-09, Brands: Maa Laxmi/ S.international/ Prime Electroni cs/ Any Other Equivalent Makes. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Rcc M-35 Grade As Per Rly's Approved Drawing And Specification For Construction Of bridge Sub Structure / Super Structure / Rcc Jacketing Of Arch, Pier, Abutment Etc. The Rate Includes design Of Concrete Mix Manufacture Of Concrete By Batching Plant, Cost Of Form Work Includes erection And De-shuttering, Placement Of Concrete Using Concrete Pump / Placing Boom, Compaction steel Reinforcement Cutting , Bending And Binding Of Reinforcement With Binding Wires And Placing In proper Position , Curing Of Concrete Upto Specified Period Complete In All Respect Including All Lead, lift, Crossing Road/track Etc. The Rate Also Includes Cost Of All Ingredients Of Rcc In/c Cement, Sand, aggregate, Admixture, Labour, Tools And Plants Etc. But Excluding The Cost Of Reinforcement. The contractor Has To Construct The Approach Road To The Site At His Own Cost, If Required, No Extra payment Will Be Made For This.

Details: Description :supply Of Set Of Two Items For Winterthur Bogie Of X-class Locomotive Confirming To The Drawings As Mentioned Below Item No (1). Centre Pin For winterthur Bogie Of X Class Locomotive As Per Drg No Goc/x/pn-18-03060 Qty-1 No/set Item No (2). Bearing For Center Pin For Winterthur Bogie Of X Class Loco motive As Per Drg No Goc/x/bg-18-03030 Qty-2 Nos/set Note: 1. Item 01 To 02 Consists Of One Set. 2. For Equivalent Material Specification Refer Goc/x/spec- x-032 3. One Integral Test Piece Should Be Provided For Each Item, It Should Be Parted In Presence Of Railway Authority For Material Testing Before Machining. [ warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :manufacturing, Fabrication And Supplying Retroreflective 'w' Sign Boards Made Up Of Thermos et Plastic Toughened Moulding Composite Sheets Of 3.0 Mm (+ 0.25 Mm) Thickness Face To Be Fully Covered with High Intensity Grade (encapsulate Lence Type) Sheeting Of 3m, In Yellow And Black Or Other Colour Com bination Including Subject Matter, Message, Symbols, Borders, Etc.as Approved By Engineer In Charge, Past ed On Substrate By Suitable Adhesive Material & With Screws/rivets At 20 Cm Centre To Centre To Back Suppo rt Sheet, Including Fabrication With Vertical Post Using Glass Mat & Resins. (vertical Post To Be Paid Separatel y) As Per Attached Drawing And Specification. [ Warranty Period: 12 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]

Details: Description :manufacturing, Fabrication And Supplying Retroreflective Sign Boards Made Up Of Thermoset Pl astic Toughened Moulding Composite Sheets Of 3.0 Mm Thickness Face To Be Fully Covered With High Intensi ty Grade (encapsulate Lence Type) Sheeting Of 3m, In Yellow And Black Or Other Colour Combination Includin g Subject Matter, Message, Symbols, Borders, Etc.as Approved By Engineer In Charge, Pasted On Substrate by Suitable Adhesive Material & With Screws/rivets At 20 Cm Centre To Centre To Back Support Sheet, Includin g Fabrication With Vertical Post Using Glass Mat & Resins. (vertical Post To Be Paid Separately) For Sr.den/se/ cstm As Per Attached Drawing And Specification. [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]