Drawer Tenders

Details: Oh Kit Of Split Pins For Am12/pan-01/ir01 Type Pantograph. One Kit Consisting Of 08 Items Of 16 Nos.as Under:- [1]split Pin For Mechanism Assly.item No.20.8 To M/s.sil New Ref.no.s0072010440 Or Gsec Drg.no.gsec/panto/sp.05 Or Similar To M/s Contransys Make Size 4x40 Mm -02 Nos. [2]split Pin For Steedy Link Assly.item No.17.5 To M/s Sil New Ref.no.s0072010120 Or Gsec Drg.no.gsec/panto/sp.01 Or Similar To M/s Contransys Make 1.6x20 Mm -01 No. [3]split Pin For Push Rod Assly.item No.8.6 To M/s Sil New Ref.no. S0072010100 Or Gsec Drg.no.gsec/panto/sp.01 Or Similar To M/s Contransys Make Size 1.6x20 Mm -01 No. (4) Split Pin For Push Rod Assly.item No.109 To M/s Sil New Ref.no. S007210336 Or Gsec Drg.no.gsec/panto/sp.04 Or Similar To M/s Contransys Make Size 3x35 Mm-01 No. (5) Split Pin For Support Rod Cylinder Assly.(plunger)item No.16.16 To M/s Sil New Ref.no.s0070210332 Or Gsec Drg.no.gsec/panto/sp.04 Or Similar To M/s Contransys Make Size 3x25 Mm -02 No. (6) Split Pin For Support Rod Cylinder Assly.(plunger)item No.16.17 To M/s Sil New Ref.no. S0072010440 Or Gsec Drg.no.gsec/panto/sp.05 Or Similar To M/s Contransys Make Size 4x40 Mm -02 No. (7) Split Pin For Yoke Assly. Item No.7.2.9 To M/s Sil New Ref.no. S0072010225 Or Gsec Drg.no.gsec/panto/sp.02 Or Similar To M/s Contransys Make Size 2x25 Mm -06 Nos. (8) Split Pin For Central Pedestal Assly. Item No.6.17 To M/s Sil New Ref.no. S0072010336 Or Gsec Drg.no.gsec/panto/sp.04 Or Similar To M/s Contransys Make Size 3x35 Mm -01 No. As Per Drg.no. Drawing No. Is Mentioned In Item Description.

Details: CATEGORY: Trainee Station _Personal Computer with given minimum specifications or higher_ Consisting of following items_Processor , Instructor Station _Configured as Server PC with given minimum specification or higher_Processor_ IntelCore TM i5_1334u Processor , Ethernet Switch 16 port , Customised Gas Ionization Detector_3 _GID_3_ with sub assembly_As per Drawing_ specification and design held with 515 ABW_ , Customised Portable Dosage Meter _PDM_ with sub assembly _As per Drawing_ specification and design held with 515 ABW , Customised Portable Dosage Rate Meter _PDRM_ with sub assembly _As per Drawing_ specification and design held , Customised Comn Bridge with sub assembly_As per Drawing_ specification and design held with 515 ABW Main Controller Board Qty_01 , Customised Battery Charger Unit with sub assembly _Electronic items__As per Drawing_ specification and design held , Customised Mechanical Hardware requirementsGas Ionization Detector_3 _GID_3_ Enclosure_As per Drawing , Customised Mechanical Hardware requirements Portable Dosage Meter _PDM_ Enclosure , Customised Mechanical Hardware requirements Portable Dosage Rate Meter _PDRM_ Enclosure , Customised Mechanical Hardware requirements Communication BridgeABS Enclosure Mockup , Customised Mechanical Hardware requirements Battery Charger Unit , Misc 6mm aluminium spacers Qty 50 , UTP CAT Bundle _50 m_ As per sample available with 515 ABW , RJ 45 connector , Spike Busters 5_15 A _ 05 sockets_ input plug 5AMP_ , Serial Cable PDM to Radio Set , Serial Cable PDRM to Radio Set , Serial Cable GID_ 3 to Radio Set , Serial Cable Communication Bridge to Radio Set , UPS_1KVA _APC_ with min 60 min backup and 03core i_p o_p power cable , Adhesive Feviqwick 10ml tube , Allen key _2_3_4_5_6_7_8_9 Set of 8_ , Bubble sheet _m_ , Corrugated sheet _m_ , Insulation tape _roll_ , Marker Pen Black _ Red , Nose plier , Packing tape _roll_ , Steel Box _As per sample available at 515ABW_ 40x18x18 with lock and key , Screw driver Set , Spanner open_jaw 16_17 , Spanner open_jaw 14_15 , Spanner open_jaw 7_9 , Crimping Tool RJ 45 , Technical manual , User hand book , Log Book , DVD Recordable DVD 4_7 GB with jewel case , DVD Recordable DVD 8_5 GB with jewel case

Details: Set Of Gauges For Schaku Coupler With Calibration Certificate (traceable To Nabl Certified Lab) & Traceability Certificate As Per List Below- 1) Profile Gauge For Upper & Lower Cup Sleeve (2ed-181-1149(schaku 40.586.06.01 (4) & 2ed-18101153(schaku(40.624.06-4(3),drg No.-se-g-121, Qty-02 Nos. 2) Gauge For Pin(31.8c11),drg. No.-se-g-120,qty-02 Nos. 3) Gauge For Allen Bolt/screw (2ed-181-1166),drg.no.-se-g-128, Qty-02nos. 4) Gauge For Fork Head 2ed-181-1204(schakudrgno.40-1000.10-6(3),drg. No.- Se-g-132, Qty-02 Nos.5) Gauge For Front Plate Sub Assy.2ed-181-1156 (schaku Drg.40.586.06.02 (4), Drg.no.-se-g-122,qty-02 Nos.6) Profile Gauge For Adjustable Cup Sleeve/pair Of Cup Sleeve 2ed-181-1074(schaku Drg.40.317.13-1 (3), Drg. No.se-g-129, Qty -02 Nos. 7) Gauge For Bush Upper & Lower 2ed-181-1091(schaku Drg.40-524.07-3(4) &2ed -181 - 1089(schaku Drg.40-524.-7-4(4), Drg.no.-se-g-118, Qty-02 Nos. 8) Limit Gauge For Yoke (sub.assy.)2ed-181-1183(schaku Gr.40.586.06.04(2), Drg. No.-se-g-124, Qty -02 Nos. 9) Snap Gauge For Bolt 2ed-181-1181(schaku Drg.40.586.06.3 (4), Drg.no.se- G-126.qty-02nos. 10) Snap Gauge For Bearing Bolt 2ed-181-1093(schaku Drg.40.586.07.03 (3), Drg. No.se-g-119, Qty-02 Nos. 11) Limit Gauge For Carrier(sub Assy.)& Leaf Spring Compl.subassy.2ed-181-1200 (schaku Drg.40-524.07.03(4) & 2ed-181-1106(schaku Drg.40.524.07.08 (20),drg.no.-se-g-117, Qty-02 Nos.12) Limit Gauge For Rear Plate Sub Assembly 2ed-181-1157(schaku Drg.40.586 .06.03 (4) Drg.no.se-g-123, Qty-02 Nos. 13) Gauge For Articulation Bearing 2ed-181-1151(schaku Drg.40.sk.1960 (3) Drg.no.s-g-127, Qty -02 Nos.14) Go Gauge For Draft Gear/draw &buff Gear (sub Assy.) Drg.no.se-g-136, Qty-02 Nos.

Details: CATEGORY: 80CH Embedded Network Video Recorder , 5MP Dome Camera , 5MP Bullet Camera , 2MP Dome Camera , 2MP PTZ Dome Camera , HDD 6 TB SATA Interfaces , Category 6 Unshielded 4 Pair Cable , Category 6 UTP Patch Panel 24 Port Fully Loaded , Category 6 UTP Patch Cord , 12 Core OFC Singlemode Armored Outdoor Cable , 24 Port LIU Rack Mount with Fully Loaded , LC LC Singlemode Duplex Patch Cord , Core Switch 24 Port , Access Switch 24 Port , 10G Uplink SFP Module , Video Encoder , Media Converter , BNC Patch Cord , 55 Inch Display , 43 Inch Display , Client Workstation , 12U Rack Wall Mount with Power Manager and Fan , 42U Rack 19 inch Network Rack , PVC Capping Casing 2 inch cross 2 inch , PVC Capping Casing 1 inch cross 1.25 inch , 1 inch PVC Pipe , 1 inch PVC Bend , 3 by 4 inch PVC Bend , Clamp for PVC fixing , Flexible Hose Stainless Steel , Outdoor Junction Box for fixing Cameras , RJ45 Connectors , 6KVA UPS , 3 Core 2.5 Sq mm Power Cable , 3 Core 4 Sq mm Power Cable , Electrical Junction Box , 12 way DB , 6mm Screw, 6mm fisher, Insulation tape, Cable tie , Installation and configuration 80 CH Embedded Network Video Recorder , Configuration and Fixing of 5MP Dome Camera , Configuration and fixing of 5MP Bullet Camera , Configuration and Fixing of 2MP Dome Camera , Configuration and Fixing of 2MP PTZ Camera , Installation and RAID Configuration Surveillance HDD , Laying of UTP CAT 6 cable , Termination and Fixing Cat6 24 Port Patch Panel , Termination and Fixing Cat6 Information Outlet , Laying of 12 Core OFC , Fixing and Splicing 24 Port LC Type LIU Single mode , Configuration of Core Switch , Configuration of Access Switch , Fixing of 55 inch Display UHD , Fixing of 43 inch Display UHD , ITC for Client Workstation , Fixing of 12U Rack Wall Mount , Fixing of 42U Rack 19 inch Network Rack , Laying of PVC Capping Casing 2 inch , Laying of PVC Capping Casing 1 inch , Fixing of PVC Outdoor Junction Box , Termination of RJ45 Connector , Installation of 6 KVA UPS , Laying of 3 Core 2.5 SQ MM Power Cable , Laying of 3 Core 4 SQ MM Power Cable , Fixing of Electrical Junction Box , ITC of 12 way DB , Installation Testing Commissioning with Documentation and Drawing

Details: :seats For Lhb Non Ac Chair Car Coaches (108 Seater). Follow Cushioning Ma Terial Either Pu Foam To Rdso Spec. Rdso/2007/cg-04 Rev. 01 Or Silicon Foam To Rdso Spec . Rdso/2013/cg-13 Rev. 01 With Fire Properties Compliant To R21 Hl-3 Of En45545 Standard And Upholstery To Rdso Spec. Rdso/2008/cg-07 Rev-nil With Amendment Slip No-5 And Cor Rigendum 1 Of May 2015, As Per Drawing: Mdts-219 Rev.03 With Corrigendum No.1 Issued Vid E Letter No Md35131 Dt.31/01/22, Packing Instruction: Chair Car Seat( Ac & Nac ) : I. All Protr Uding Portions Of The Chair Car Seat Should Be Protected With Plastic Cover. 2.then Co Mplete Seat And Its Corners / Hand Rest/ Foot Rest Should Be Properly Wrapped With Bio Degradable Air Bubble Sheet Of Thickness 30 Micron And Bubble Diameter 10mm. 3. The Fu Ll Seat Should Be Further Wrapped With 3 Ply Corrugated Paper Sheet. 4. Each Individual Chair Should Be Covered All Around With Transparent, Plain, Biodegradable, Polythene Sheet To Prevent Ingress Of Dust/water. 5. The Seat Bottom Frame Portion Sh Ould Be Fitted With M.s Supports For Its Balancing, So That The Chair Can Rest On The Fl Oor Without Tilting On Any Side. 6. The Overall Packing Should Be Such That It Is Not Da Maged During Transportation Of The Material, The Seats Should Be Tied Up In Pairs Only. 7. All Hardware/accessories/loose Items In One Coach Set Should Be Separately Packed I N Wooden Box Having Sufficient Strength. 8. A List Should Be Pasted On Each Box Showi Ng Purchase Order No., Pl No., Description Of Item, Drg. No., Quantity, Firm Name, Addres S & Date Of Dispatch And Its Contents. Note : Qr Code Is To Be Affixed " Near Manufactur Er Name Plate On Each Seat " On Top Of Packed Seat As Per Pi Mentioned Above " On Top O F Wooden Box For Sr.no.7 Qr Code Having Details As Listed Below : 1 Name Of The Manufa Cturer 2 Purchase Order Number 3 Purchase Order Date 4 Unique Serial Number (or Lot Number For Bulk Items) Of The Manufacturer O R 5 Date Of Manufacture 6 Delivery Challan No. 7 Delivery Challan Date The Qr Code Shall Be As Per Iso/iec18004 Model2 And The Data Shall Be Available As Xml Using The Tags Detailed Above. Incase The Above Deta Ils Are Not Available, Or The Qr Codes Are Not Readable, The Supplied Material Is Liable To Be Rejected. [ Warranty Period: 84 Months After The Date Of Delivery ] ]

Description: BOQ ITEMS: Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge., Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge. In cement mortar, Earth work in excavation by mechanical means Hydraulic excavator manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil., Excavation work by mechanical means Hydraulic excavator manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50 m Hard Rock, Filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1 isto 3 isto 6 where 1 Cement 3 coarse sand zoneIII 6 graded stone aggregate 20 mm nominal size, Supply mix place in position compact and cure cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer incharge and including cost of centring and shuttering and cement., Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level 1 isto 1.5 isto 3 where 1 cement 1.5 coarse sand zoneIII 3 graded stone aggregate 20 mm nominal size , Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 isto 6 1 cement 6 coarse sand, Centering and shuttering including strutting propping etc. and removal of form for Foundations footings bases of columns etc. for mass concrete, Steel reinforcement for R.C.C. work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of grade Fe500D or more, 15 mm cement plaster on the rough side of single or half brick wall of mix 1 isto 6 1 cement 6 fine sand Rates for external plastic are for height upto 10m from ground level in less otherwise stated, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work a. 15 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work b. 20 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work c. 25 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work d. 50 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 20 mm nominal bore, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 25 mm nominal bore, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 50 mm nominal bore, Constructing masonry Chamber 30 into 30 into 50 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for stop cock with C. I. surface box 100 into 100 into 75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Constructing masonry Chamber 60 isto 60 isto 75 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for sluice valve with C.I. surface box 100mm top diameter 160 mm bottom diameter and 180 mm deep inside with chained lid and RCC top slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Constructing masonry Chamber 90 into 90 into 100 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for sluice valve with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep inside with chained lid and RCC top slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Supply and laying of HDPE Pipe line 110mm dia complete in all respect as per direction of EIC

Description: BOQ ITEMS: Model showing relation of fimbriae and ovary, 9 day human blastocyst, 12 day human blastocyst, 13 day human blastocyst, Preovulatory follicle, Ovulation, Corpus luteum, Transverse sections through at various stages of development set of 3 models (A), Transverse sections through at various stages of development set of 3 models (B), Dorsal view of human embryo showing somites set of 2 models (A), Lateral view of human embryo showing bulging pericardial area set of 3 models(A), Lateral view of human embryo showing bulging pericardial area set of 3 models(C), Transverse section showing mesodermal germ layer set of 4 models (A), Transverse section showing mesodermal germ layer set of 4 models (B), Transverse section showing mesodermal germ layer set of 4 models (C), Ovum with board, Development human embryo 22nd days, Ovary with child, Development embryonic ovulation set of 5 models, Embryonic placenta previa set of 3 models, Embryo neural groove 26 days, Development embryo set of 10 models, Development of embryonic early blastocyst set of 4 models, The uterus at the time of implementation, Primordial follicle consisting of a primary oocytes surrounded by a layer of flattened epithelial cells on board (A) Primordial follicle, Primordial follicle consisting of a primary oocytes surrounded by a layer of flattened epithelial cells on board(B) Growing follicle , Type a spermatogonia derived from the spermatogonal stem cell population represent the firstcells in the process of spermatgenesis set of 43 models on board, Abnormal germ cells primordial follicle with two oocytes , Abnormal germ cells trinucleated oocytes , Abnormal germ cells various types of abnormal spermatozoa set of 5 models on board, Development of dizygotic twins normally each embryo has its own amnion chorion and placenta set of 8 models on board, Possible relations of fetal membranes in monozygotic twins set of 12 models on board, Fertilization pathway a succession of steps After a sperm binds to the zona pellucida set of five models on board, Development of embryo showing structures Passing through the primitive umbilical ring A) 5-week embryo , The intraembryonic coelom prior to body folding set of 5 model (3d), Successive stages in development of the respiratory four gut. (3d) a. at the end of the third week , uccessive stages in development of the respiratory four gut. (3d) forth week , Development of the chief branchi of the human lungs set of 6 models on board, Histological and functional , Various types of esophageal , Successive stages in development , Ventral view of coronal section of heart at level of atrioventricular canal showing development of veinous valves a, b, Development of conotruncal ridge & closure of interventricular foramen a , Development of viteline vein, umbilical vein a , c (2d), Development of viteline vein, umbilical vein a , b, c, d (3d), Development of inferior vena cava, Development of inferior vena cava, Development of inferior vena cava, Development heart 7 somites embryo, Development heart (set of 11 models) on the stand (3d), Transformation of the pericardioperitoneal canals into the pleural cavities set of 2 models (A), Embryonic aortic arch set of 3 models on stand (3d), Developments of the inferior vena cava azygos vein &superior (3d) vena cava Seventh week , Developments of the inferior vena cava azygos vein &superior (3d) vena cava The venous system at birth , Developments of the inferior vena cava azygos vein &superior (3d) vena cava Double inferior vena cava at the lumber level (clinical correlate) , Developments of the inferior vena cava azygos vein &superior (3d) Absent inferior vena cava (clinical correlate), Fetal circulation before birth (3D), Human circulation after birth (3D), Embryonic aortic arches 4th & 6th week a b, Embryonic aortic arch set of 3 models on board (2D), Primitive dosal & ventral mesentery (3d), Anterior view of intestinal loop showing coiling of small intestine set of 2 models, Rotation of midgut set of 7 models a, b, c, d, e, f, g, (big size) on stand (3d), Development of pancreas set of 5 models with stand, Development of embryo 4th and 5th weeks set of 2 models a b on stand (3d), Development stomuch embryo with pancreas and gall bladder (3d), Stomach nerve cutting section, Development of diaphragm set of 3 models A, Development of diaphragm set of 3 models B, Folding of caudal end of the embryo a b c, Body folding changes the shape of the intraembryonic coelom a, b, c, Separates the pericardial cavity from pleural cavity a, b, c, In the future thoracic region the septum transversum froms a ventral portion, Development of Digestive System , Intermediate mesoderm of pronephric, Relation of hindgut & cloaca (3d), Genital duct in male and female a, c with board, Sagittal section showing formation of uterus & vagina a b c, Vesico urethral portion of endodermal cloaca showing the sinus tubercle & fused paramesonephric duct (3d), Development of urogenital sinuss & formation of trigone of the bladder a, b, c, d (3d), Development of renal pelvis (kideny) set of 4 models a b d on stand (3d), Divisions of the cloaca into the urogenital sinus and ano rectal canal set of 3 models on stand (3d), The urethra is open on the ventral surface of the penis, Development of the external genitalia in the female & in the new born set of 2 models on board, Development of the external genitalia in the female on board., Development of the peritoneum (3d), Ascent of the kidney set of 3 models with stand a b c (3d), Indifferent stages of the external genitalia a b, Development of external genitalia in the male at 10 weeks set of 7 models, Hypospadias showing the various locations of abnormal urethral, Development of the external genitalia in the female at 5 months a b, Urorectal & rectovaginal fistulas set of 4 model, Pharyngeal arches with board, Frontal view of embryo showing stomodeum nasal placodes on frontonasal process A, Development of face a , c, d with board, Development of palate & roof of mouth set of 6 model (A,C,D,E,F), Frontal aspect of face showing nasal prominence maxillary prominence (A), Development of face cut section showing pharyngeal archs (3d), Development of the pharyngeal arches (a, b) , Thyroglossal cyst, Frontal section through the head of a 6.5 week embryo a b, Frontal section through the head of a 7.5 week embryo a b, Frontal section through the head of a 10 week embryo a b, Intermaxillary segment and maxillary processes a b, Development brain embryo -3D, Development of human brain (embryo) about mm (3d), Development brain (embryo) three month old(3d), Development brain (embryo) 13.6 mm long medial surface (3d), Development brain (embryo) about 10.2 mm (3d), Development brain (embryo) 13.6 mm long hind brain (3d), Development brain (embryo) set of 6 models (3d) A,B,D,E, Drawings illustration a variety of NTDS involving the spinal cord a b c d e, Neural crest cells penetrating the fetal cortex of the suprarenal gland a b, Sagittal section through the cephalic part of a 6 week embryo & 11TH & 16th week a b c, Formation of Ventral motor & dorsal sensory horns A B on board, Formation of the vertebral column at various stages of development a b c, Ventrolateral view of the optic cup & optic stalk of a 6 week embryo a b c

Details: CATEGORY: ALLEN KEY SET , CALLIPER INSIDE SPRING , CALIPER OUTSIDE SPRING , DIVIDERS SPRING , ELECTRICIAN SCREW DRIVER , HAMMER BALL PEEN , HANDLS FILE FOR SECOND CUT , PHILIPS SCREW DRIVER SET OF 5 , PLIERS COMBINATION , SPANNER DE SET OF 12PCS , SPANNER SOCKET , STEEL RULE , CHISEL FLAT , WIRE CUTTER AND STRIPPER , ADJUSTABLE SPANNER , DRILL TWIST , ELECTRIC SOLDERING IRON , ENGINEES SQUARE , FEELER GAUGE , FILE FLAT BASTARD 200MM , FILE HALF ROUND 2ND CUT 200MM , FILE SQUARE 2ND CUT 200MM , FILE SQUARE ROUND 300MM , FILE TRAINSGULAR 2ND CUT 150MM , FLAT FILE 2ND CUT 250MM , FLAT FILE BASTRAD350MM , DRIFT PUNCH COPPER , HACKSAW FRAME , HAMMER CHIPPING , HAMMER COPPER WITH HANDLE , HAMMER MALLET , INSULATED SCREW DRIVER , MAGNETO SPANNER SET , PISTON RING GROOVE CLEANER , PLIERS FLAT NOSE , PLIERS ROUND NOSE , PLIERS SIDE CUTTING , PUNCH LETTER 4MM , SCRAPER TRAINGULAR , SPANNER T FLOCKS , SPANNER ADJUSTABLE , SPARK PLUG SPANNER , STUD REMOVER , TORQUE WRENCH , VACCUM GAUGE , VALVE SPRING COMPRESSOR , VERNIER CALIPER , STEEL MEASURING TAPE , AUTO ELECTRICAL TEST BENCH , BATTERY CHARGER , CAR JET WASHER , BLOW LAMP , BELT TENSIONER GAUGE , CHAIN PULLEY BLOCK , COMPRESSION TESTING GAUGE , CYLINDER LINER , DIFFERENT ENGINE BEARING MODEL , DIFFRENT PISTON MODEL , FUEL FEED PUMP , ENGINEES STHETHOSCOPE , GREASE GUN HEAVY DUTY , LIFTING JACK SCREW , MULTIMETER DIGITAL , AUTOMOTIVE OIL PUMP , RADIATOR CUT SECTION CROSS FLOW , RADIATOR CUT SECTION DOWN FLOW , RADIATOR PRESSURE CAP , SURFACE GAUGE WITH DIAL , TACHOMETER , TANDEM MASTER CYLINDER , THERMOSTAT , TIMING LIGHTER , TURBOCHARGER CUT SECTION , AUTOMOTIVE WATER PUMP , WORK BENCH , WORKING MODEL AIR BRAKE ASSEMBLY , ALTERNATOR ASSEMBLY , CUT SECTION TRANSMISSION GEAR BOX , CUT SECTION CENTRIFUGAL CLUTCH , DEMONSTRATION BOARD OF ELECTRONIC IGNITION SYSTEM , DEMONSTRATION BOARD OF MPFI SYSTEM , DISC BRAKE IN WORKING CONDITION , DRUM BRAKE ASSEMBLY , FUNCTIONAL MODEL OF DIFF SENSOR , STEERING ASSEMBLY , TUBELESS TYRE CARS TRUCK , TYRE SPLIT RIM WHEEL , WORKING MODEL OF POWER WINDOWS , AIR CONDITIONED CRDI VEHICLE IN RUNNING CONDITION , AUTOMOTIVE EXHAUST FIVE GAS ANALYSER AND DIESEL SMOKE METER , DIESEL ENGINE CRDI FOUR STROKE FOR DISMANTLING , DIESEL ENGINE RUNNING CONDITION STATIONARY TYPE , HYDRAULIC JACK HI LIFT , MULTISCAN TOOLS TO SCAN ENGINE , WORKING CONDITION OF DIESEL ENGINE CRDI FOUR STROKE FAULT SIMULATION , CUT SECTON OF FOUR BYE SIX CYLINDER DIESEL ENGINE , DIESEL ENGINE SIX CYLINDER IN RUNNING CONDITION , FOUR STROKE PETROL ENGINE WITH CNG SETUP , MPFI PETROL ENGINE WITH SWIVELING STAND , PETROL ENGINE TWO STROKE , TYBE TYRE VULCANIZING MACHINE , TWO POST CAR LIFT CAP 4000KG , WHEEL ALLIGNMENT MACHINE , WHEEL BALANCING MACHINE , WORKING CONDITION OF PETROL MPFI ENGINE FAULT , CARBURETOR SOLEX MIKUNY , CUT SECTION MODEL OF ELECTRICAL SYSYTEM WORKING MODEL , HEAVY COMMERICIAL VEHICLE , CYLINDER BORE GAUGE CAPACITY , MINI DRAFTER , SET SQUARE , DRAUGHTSMAN DRAWING BOX

Details: CATEGORY: BIG PLASTIC TRAY , MEDIUM PLASTIC TRAY , Kidney Tray , SPUTUM CUP , Measuring glass 200ml , Ampoule Cutter , TABLET CUTTER , Motor and pistol medium , Plastic Hair Comb Large , Comb Large , Medium Silver Tray with Lid , SS Small Bowl , Stainless Still Medium Bowl , Silver Glass 250 ml , Stainless small kidney Tray , Artrey Forcep , Thumb forcep , Sponge Holding Forcep , Steel scissors , Lock and Key Medium , Rubber Mackintosh Sheet , DRAW SHEET , SPONGE TOWEL , OT TOWEL GREEN , BIG SHEET WHITE , DIGITEL THERMOMETER , BP APPARATUS , Weighing Machine , Steel Tray with cover big , Medium Size tray with Lid , Steel Tray with cover small , Steel Kidney tray , Stethiscope , Breast Pump , Doppler with bateries , Fetoscope , soap Tray , Sponge Holder Medium , InchTape , SS Bowl Small , SS Bowl big , SS Tray Big , Ss Tray Medium , SS Basin , SS Kidney tray Steel , Plastic kidney tray , Enamel Kidney tray , Sputum mug , SS Basin medium , SS Basin Large , Enamel tray Medium , plastic mug , pint measurer , SS Tray Large , Enamel Bowl , Feeding cup , INJECTION TRAY WIT LID , Tuning Fork , Percussion Hammer , Glucometer , foetal dopler , Glucometer strips 100 strip , Haemoglobinometer with microslides , Lancet , Aneroid BP appratus , Electric Steamer , steel Spoon , Cervical Collar , pelvic collar , CRASH CART TROLLEY , wheel chair , strecher , SPENCER WELLS ARTREY FORCEP 5 , WELLS ARTREY FORCEP 6 , SPENCER WELLS ARTREY FORCEP 7 inch , KOCHERS ARTREY FORCEP STRAIGHT 8 inch , KOCHERS ARTREY FORCEP CURVED 8 inch , DEBAKEY KELLY ARTREY FORCEP STRAIGHT 7 inch , DEBAKEY KELLY ARTREY FORCEP CURVED 7 inch , DISSECTING FORCEP PLAIN 6 inch , DISSECTING FORCEP TOOTH 6 inch , DISSECTING FORCEP TOOTH 7 inch , DISSECTING FORCEP TOOTH 8 inch , DISSECTING FORCEP TOOTH 10 inch , BP HANDLE 3 number size , BP HANDLE 4 number , ADSON FORCEP PLAIN 5 inch , ADSON FORCEP THOOTH 5 inch , MAYO HEAGERS NEEDLE HOLDER STRAIGHT 6 inch , MAYO HEAGERS NEEDLE HOLDER STRAIGHT 7 , MAYO HEAGERS NEEDLE HOLDER STRAIGHT TUNGSTEN CARBIDE 7 , RYDER NEEDLE HOLDER TUNGSTEN CARBIDE 6 , IRIS SCISSOR STRAIGHT 5 , METZABAUM SCISOR STRAIGT 7 , MAYO SCISSORS CURVED 7 inch , MAYO SCISSORS CURVED TUNGSTEN CARBIDE 7 , DRESSING SCISSORS SHARP BLUNT 6 , LISTRE BANDAGE CUTTING SCISSORS 7 , HYSTRECTOMY MAINGOT FORCEP STRAIGHT 6 , HEANYS HYSTRECTOMY FORCEP SINGLE THOOTH 6 , CHEATLE FORCEP 10 , LYGENBACK RETRACTOR SMALL 35X15 , LYGENBACK RETRACTOR LARGE 45X20 , MORRIS RETRACTOR 2 , KELLY RECTAL SPECULAM M , GREEN ARMYTAGE M , SPONGE HOLDING FORCEP M , OVEM FORCEP CURVED M , UTERINE VULSELLUM M , HEGAR DIALATORS FIND half MM , HYSTOGRAPHI CANULA W L SET 3 , MIDWIFERY FORCEP SIMPSON M size , CERVICAL BIOPSY PUNCH FORCEP M size , SIMS SPECULAM M Size , CUSCO VAGINAL SPECULAM M size

Details: CATEGORY: dia GI Tubing medium grade 1 point 5 Mtr Long Make Jindal or Tata or Kalinga , Service cable PVC insulated aluminium conductor 1100 volt grade Heavy duty served with inner service connection 10 Sqmm 2 core Make Havells or Finolex or Plaza , Ceiling Rose three terminal snow white Make Anchor or SSK or CONA , LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts as per TS , PVC Flexible wire copper conductor multi stranded 0 pont 0016 by 76 Make havells or Finolex or Plaza , PVC Flexible Conduit pipe 15 mm dia Make Polycab or Supreme or Finolex , PVC Round or Square Block Make Polycab or Supreme or Finolex , Fire extinguisher of 1 kg of dry power type conforming to IS 13849 along with its accessories Make Cease fire or Omex or Alfa Fire , Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings drilled with 2 nos holes for 6 mm dia near one side , CI Earth Pit Cover of size 300 x 300 x 6 mm with Angle iron frame of size 20x20mm 3 mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long Pipe Make Jindal or Tata or Kalinga , GI wire 4 mm diameter for earthing , Charcoal , Salt normal , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindalor Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex , Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm Type Lacquered finish with arm seat and back cushion velvet upholstery Make Supreme or equivalent , Study Table of size 4 ft x 2ft Wooden top on round tube structure with three drawers on one side , Steel almirah of size 1855mm with 4 shelves MS sheet doors and and locker 1.00mm thicklock material brass and steel finished and thickness of shelves 0 point 90mm , Mild Steel rack adjustable sheet 1.00mm thick nuts and bolts are in hexagon blck steel overall height 1point 755m depth 0 point 410m and width 0 point 915m , Hand Held Trolley of size 1200 x 900 x 1200 mm of 2 mm thick MS plateform and size of wheel 127 mm with loading capacity minimum 200 kg and overall weight of trolleys 19 Kg