Drawer Tenders

Details: Description :manufacture And Supply Of 6 Mm Thick New Nylon Cord Reinforced Grooved Rubber Sole Plates With Horns To Rdso Drg. No. T-9630 (from Slee per No. 25 To 27) For Retro Fitment Of 1 In 12 Turnout With 10125 Mm Zu1-60/60e1a1 Thick Web Switch (curved) Bg (1673 Mm) For 60 Kg (uic)/60e1 On Psc S leepers Laid In Field With Alt. 8 Or Earlier Version Of Rdso/t-6155 And Compliance With Irs Specification S. No. T-55-2023 (or Latest) For Rail Pads For Placing Be neath Rail. (the Alt. In Drawings & Specification Issued By Rdso Up To One Month Prior To Tender Opening Date Shall Be Applicable In This Tender) (one Set Cons ist 12 Nos. Of Nylon Cord Reinforced Grsp T-9630) [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Details: Description :self Adhesive Insulation Material Size 5x1250x1250mm, As Per Drawing/specification: mdts-116 Revision 6. Sample Should Be Approved By The Consignee Before Bulk Supply. All Testing Must B e Performed By A Laboratory Accredited By The National Accreditation Board For Testing And Calibration Labo ratories (nabl) For The Specific Test, Regardless Of Whether The Test Falls Within The Nabl Scope, With The Exc eption Of The Tests Like Dimensional Check, Thickness, Colour, Surface Finish, Which May Be Carried Out In Hou se. Fire Retardant Tests In Accordance With En 45545-2 Must Be Conducted By Either An Nabl-accredited Lab oratory For These Specific Tests Or A Testing Laboratory Accredited According To Iso/iec-17025 For The Perfor mance And Conduct Of Fire Tests In Compliance With En 45545-2. Proof Of Accreditation And Test Results For Al l Tests Conducted Must Be Submitted. (all Test Certificates Shall Be Submitted And Uploaded Together With Th e Bid For Evaluation Purposes). [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Modification/alteration In Existing Medha Make Ei (electronic Interlocking) As Per Latest rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Description:- Modification/alteration In Existing Ansaloda Make Ei (electronic Interlocking) As Per latest Rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Description:- Modification/alterationinexistingei(electronicinterlocking)asperlatestrdso guidelines/tan. It Includes: Design And Modify Cation In Existinginterface And Interlocking Circuits And logic Of Ei System Including Modification Inthe Vdu(video Display Unit)/ Lcp(local Control Panel)/ Ccip (control Cumindication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelinesand As Per Approved sip And Circuit Diagrams. All The Material (interface Cards /relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Beprovided By The Contractor. Th E Work Also Includes The Supply of Modifiedselection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modifiedsip. It alsoincludesthecarryingoutoffat,sat(asapplicable)jointlywithrailwaysandsatisfactory commissioning.provisionofautoresetofaxlecountershouldbeonvdu(softreset).all plans/drawings/circuits Etc. Should Be Preparedon Auto Cad, Soft Copy To Be Supplied On Pen Drive and 06 Sets Of Hard Copiesalso To Be Supplied. Alteration Involving Modification From 11 Up To 20 routes.(peralteration=station)inspectionby:-rdsoforrdsoitems,otherthanrdsoitems. inspection By Consignee.

Description: CATEGORY: Wash hand basin white of size 450mmx300mm , PPR Reducer Elbow 32mm x 20mm dia , Brass CP Wall Mixer for mixing hot and cold water , Distribution box 8 way double door SPN , MCB SPN 240 Volts 32 Amps , MCB SP 6 to 32 Amps , PVC tape 19mm wide 5 m long , Cable PVC insulated electric cables of size 1.5 Sqmm single core , Cable PVC insulated electric cables of size 2.5 Sqmm single core , Cable PVC insulated electric cables of size 4 Sqmm single core , PVC casing capping of size 1inch medium grade , PVC casing capping of size 3 by 4 inch Medium Grade , Switch Piano 5 Amp 230 Volts Flush type one way , LED Tube light fittings 15W 230V box type 4 feets with CRCA body , Steel screw full thread with rawl plug of 1 1 by 2 inch , PVC switch board size 7 inchx4 inch , PVC switch board size 8 inch x 10 inch , PVC L bend and T junction , Switch socket combination 2 in 1 and 15 Amp 230 Volts , Switch socket combination 5 Amp 230 Volts , Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long , Service cable PVC insulated aluminium conductor 10 Sqmm 2 , Ceiling Rose three terminal , LED Bulk head fitting with LED lamp 10 watts , PVC Flexible wire copper conductor multi stranded 0.0016 by 76 , PVC Flexible Conduit pipe 15 mm dia , PVC Round or Squire Block , Fire extinguisher of one kilogram capacity , Exhaust fan 230 volts 300 mm sweep plastic body , Water cooler of capacity 40 ltrs , Earthing plate 600 x 600 x 6 mm , CI earth pit cover of size 300 x 300 x 6 mm , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. , GI wire 4 mm diameter , Charcoal , Salt normal , Air termination single pointed aluminium rod 12 mm dia and 300 mm long. , Testing point terminal block make of gun metal , Aluminium strips 25 x 3.0 mm , Galvanised Iron strip 32 x 6 mm , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt , Silver Stainless steel table 1800x900x750mm , Dining Chairs steel made out of superior quality , Water Dispenser of 230 V 500 Watts without refrigerator , Study table of size 4x2 wooden top on round tube structture with three drawers , Study chair of size length 56cm height 82 cm width 56 cm Lacqured finish , Plastic dustbin of capacity 10m ltrs , Peg set of six

Details: Description:- Modification/alteration I N Existing E I (electronicinterlocking) A S P E R Latest Rdso guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu(video Display Unit)/ Lcp(local Control Panel)/ Ccip (control Cum Indication Panel),maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved sip And Circuit Diagrams. All The Material (interface Cards / Relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply O modified Selection Table, Interface Circuits, Vdu/ Lcp/ccip Diagram Etc. To Suit The Modified Sip. It Also includesthecarrying O U T Of Fat , S A T ( A S Applicable) Jointly Withrailways A N D Satisfactory commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On Auto Cad, Soft Copy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.

Details: Modification /alteration In Existing Ei (electronic Interlocking) As Per Latest Rdso Guidelines /tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved s I P A N D Circuit Diagrams. A L L The Material (interface Cards/re1ays/wiring Material/ Connectors /fuses/communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modified sip. It Also Includes The Carrying Out Of Fat, Sat (as Applicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings /circuits Etc. Should Be Prepared On Autocad, Softcopy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.(alteration Involving Modification from 11 Up To 20 Routes. )

Details: Rate Contract For Manufacture And Supply Of 6400 Mm Curved Switches As Per rdso Drg. No. T- 9775 (with Latest Alterations] With Zu-1-60 / 60 E1a1 Thick web Grade 880 Class-a Tongue Rails And Uic/60e1 60 Kg Per M Grade-880, Class a Or B Stock Rails With Elastic Fasteners, Spring Operated Setting Device [rdso-t- 6216 With Latest Alterations] And Anti Creep Device [rdso T-9777 & T-9778 With latest Alterations], Complete With All Fittings For 1 In 8.5, Bg 60 Kg Turn Out For fan Shaped Layout On Psc Sleepers I.e. All Fittings For Switch Portion As Per Sub assembly No. T-9775 [with Latest Alteration] In Accordance With Rdso's Standard drawing No. T-9774 [with Latest Alterations] Excluding Elastic Rail Clips, Metal liners And Insulating Liners. Any Addition/ Modification To The List Of Fittings, issued By Rdso In Subsequent Alterations Up To The Date Of Closing Of Tender Is also To Be Supplied By The Firm For Which No Additional Payment Would Be Made. specification: T-10-2023 With Latest Alteration If Any Up To The Date Of Closing tender.. Validity Is 1 (one) Year