Sashastra Seema Bal Tender

Supplying and Fixing of 600 mm x 600 mm false ceiling light of 35 watt as per direction of Engineer In Charge….Phillips / Havells/ Bajaj…

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Thickness above 10 mm up to 25 mm

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd..Telephone socket outlet

Providing and fixing C.P. brass angle valve for basin mixer and geyser points make (jaquar ARI-CHR-39053) of approved quality conforming to IS:8931 15mm nominal dia as per Direction of Engineer-in-Charge

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge.With stainless steel cover plate minimum 1.25 mm thickness

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Supplying and fixing of 2 watt LED Lumanaire round shape,suitable to fix on fall ceiling make CG/havells/ Philips/Crompton as per direction of engineer in charge

Supplying and fixing of following size modular, GI box / PVC box alongwith modular base & cover plate for modular switches in recess etc as reqd...3 module (75 mm x 100 mm)

Providing and fixing bright finished brass handles with screws etc. complete:125 mm

Supplying and fixing of 10 watt LED Lumanaire round shape,suitable to fix on fall ceiling make CG/havells/ Philips /Crompton as per direction of engineer in charge

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters..30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete:125x65x2.12 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm

Providing and fixing sheer dimout ribbed ZEBRA blinds of vista or equivalent with chain drive mechanism 100% polyster fabric with colour fastness two light 4-5 grade and repeat pattern having widths 8 cm solid and 5cm sheer approved as per Engineer-in-charge. (The rates are inclusive of all the operation, fittings & materials.

12 mm cement plaster of mix:1:6(1 cement: 6 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:One or more coats on old work

Providing and Fixing CERA Towel Rod 22 inch of Approved Make CERA, CAT No. F5015103CH as approved and directed By Engineer In Charge.....

Providing and fixing C.P. brass Opal Prime Sensor Faucet for Wash Basin (9V transformer of make (Jaquar Cat. SNR-CHR-15019PMEB) approved quality conforming to IS:8931: as per Direction of Engineer-in-Charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6(1 cement : 6 coarse sand)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required..25 mm

Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Supplying and fixing of following size modular, GI box / PVC box alongwith modular base & cover plate for modular switches in recess etc as reqd..6 Module (200 mm x 75 mm)

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing Fancy Paper Holder distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour make (jaquar Cat. CPA-CHR-1153) as per Direction of Engineer-in-Charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.Double pole

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade 1, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete:12 mm thick

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5 mm thick

Supplying and fixing of 15-18 watt LED Lumanaire round shape,suitable to fix on fall ceiling make CG/havells/Philips /Crompton as per direction of engineer in charge

Providing and fixing CLICK CLACK Waste 12 mm of approved quality and colour make (Jaquar ALD-CHR-727) as per Direction of Engineer-in-Charge

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit i/c making good the damage, whitewash in existing colour etc. as required. 2x1.5 sqmm + 1x1.5 sqmm earth wire

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Designing, fabricating, testing, installing and fixing in position with Aluminium Composite Panel Cladding, with open grooves of the building , for all heights and all levels etc. including: (a) Providing, fabricating and fixing panels of aluminium composite panel cladding in shape in metalic or approved colour of approved shades made out of 4mm thick aluminium composite panel material as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. all complete required to perform as per specification and drawing and as approved by consultant and Engineer In Charge..and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. The fastening brackets are hot dip galvanised and they are made with SS 316 etc fixed complete.. The payment ofScaffolding shall be paid seperately...

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion..Powder coated aluminium (minimum thickness of powder coating 50 micron)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd. 3 pin 5/6 amp socket outlet

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)..Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd. 5/6 amps switch

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd..Bell push

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit i/c making good the damage, whitewash in existing colour etc. as required 2x4 sqmm + 1x4 sqmm earth wire

Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size..Size of Tile 600 x 1200 mm

Providing and fixing wash basin 550 mm rectangular wall-mount bathroom sink of approved quality and colour make (K-30520IN) as per Direction of Engineer-in-Charge

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd...15/16 amps switch

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm

Providing and fixing Fancy liquid soap container & Soap Dish Holder distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour make (Jaquar ACN-SSF-1135N) as per Direction of Engineer-in-Charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

S/F of exhaust fan having min sweep 250mm and RPM of 1250 in the existing opening complete with testing etc. as required.

Supplying and fixing of following size modular, GI box / PVC box alongwith modular base & cover plate for modular switches in recess etc as reqd..8 Module (125 mm x 125 mm)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd...TV Antenna Socket Outlet

Supplying and fixing of following modular switch, socket & accessories on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd. 6 pin 15/16 amp socket outlet

Supplying and fixing of 60W LED Flexion Profile strip,suitable to fix on fall ceiling make CG/havells /Philips/Crompton as per direction of engineer in charge

Providing and fixing health faucet of approved quality & make (jaquar Cat. ALD-CHR-577) as per direction of Engineer-incharge. 15 mm nominal bore as per Direction of Engineer-in-Charge