Public Works Department Tender

Providing the service for supervisor, having knowledge of road maintenance and civil work, equipped with Motorcycle, android mobile at list 5.0” screen i/c internet & Data transfer facility, conversant in Hindi and English for daily inspection/Supervision of roads under the jurisdiction of PWD Division SER-1 as per direction of Engineer-in-Charge for working hours of 8 hours shift. (No extra payment will be admissible; rates are inclusive of all expenses).

Deduct on Account of GST on Items Sl. No. 4,9 & 11 as per correction factor @0.973 on DSR 2023 Items (as per SE(TAS)CPWD O.M. No. 158/SE(TAS)/ GST/2024/02-E dated 08/08/2024)

Painting with synthetic enamel paint on Kerb sones, crash barriers, railing/grill of central verge, walls etc. on road sides with paint from approved brand and manufacture of required colour to give even shade including applying additional coats if required i/c removing loose flakes, cleaning of dust and application of putty/primer as per requirement as per direction and satisfaction of Engineer-in-Charge. One or more coat

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and applying 7.50 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (Glass beads in top layer only)

(a) (i) Damaged Carriage way /NMV/Footpath /Central verge /Side verge. (ii) Missing manhole covers. (iii) Chocked bell mouths /Kerb Channel. (iv) Water logging if any. (v) Obstruction in the Carriage way /NMV /Footpath. (b) Minor repair of footpath by fixing paver block or with C.C. & minor repair of Kerb stone by fixing kerb stone with cement mortar (material will be supplied by the department free of cost). (c) Keeping the roads free from unauthorized banners, posters, hoardings, flex boards unauthorized overhead signage or advertisement boards anywhere in the ROW of the roads either in Central Verge, Footpath etc. (d) Keeping the drains free from floating material. (e) Relocation of dislocated grills, railings, manhole /drain covers and kerb stone. (f) Cleaning of road side low height manually accessible fixture and fitting including supporting structures. (g) Filling of pot holes on carriageway, materials shall be supplied by department at free of cost. (h) Other minor / petty repair works for which material to be supplied by department at free of cost. (i) Removal of unclaimed malba, construction waste etc. from Road side and disposal of at temporary collection site of sub division/Division.

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Extra for Providing services of maintenance van beyond 08 (Eight) working hours duty (rate is over and above base item).

Hiring and operation of hydraulic excavator (3D)/JCB Machine for 8 Hours per day for dressing of kutcha portion and removal of malba i/c loading, unloading of dismantled material in trucks or dumpers, levelling and dressing of ground etc. including all risk involved in demolition operations etc. i/c cost of driver, helper, diesel, lubricants etc. complete as per direction of Engineer-in- Charge.

Providing services of maintenance van of approved make of Mahindra Bolero Maxx or equivalent with minimum engine capacity 2500 CC or more and GRAP Stage-IV compliant, of specified size having provision for installing GPS tracking device with 360 degree Sim based camera conforming to Particular Specifications as mentioned in the NIT document. The GPS System with 360 degree sim based camera shall be provided and fixed by the agency in the maintenance van and further maintenance and operation of the same shall be done by the agency. The maintenance van shall be provided four beldars/sewer man, One driver and one mason/welder (as per requirement) with essential tools like bituminous road cutter, automatic plate vibrator, Air compressor, Hilti breaker, welding machine and other essential tools required for repairs, etc. as mentioned in the Particular Specifications in NIT document for carrying out the following activities complete to the satisfaction of Engineer- in-Charge. Note: (1.) The hire charges of maintenance van is on per day basis are for normal working hours of 8.00 Hrs. shift, however the van should be mobilised by the agency in case of urgency /emergency, other than normal working hours within two hours of giving instructions by Engineer-in-charge for which payment shall be made as per relevant item. (2.) Include cost of services of operating staff/driver, Cost of lubricating oil, diesel/Petrol/Kerosene oil, CNG, other consumables for running the maintenance van, required tools and equipments for carrying out below mentioned works. Daily inspection of roads for observing the deficiencies mentioned below and rectification as per time schedule of scope of work.

Providing services of maintenance vehicle TATA 407/609 tipper or equivalent with mechanically unloading facility (Engine CC more than 2900 CC) and shall be GRAP Stage-IV compliant, of specified size having GPS tracking device 360 degree Sim Based Camera conforming to Particular Specifications as mentioned in the NIT document. The GPS System with 360 degree sim based camera shall be provided and fixed by the agency in the maintenance vehicle and further maintenance and operation of the same shall be done by the agency. The maintenance vehicle shall be provided with one driver with smart mobile phone facilities, four beldars with essential tools required for lifting etc. as mentioned in the Particular Specifications in NIT document for carrying out the following activities complete to the satisfaction of Engineer- in-Charge. Note: (1.) The hire charges of maintenance vehicle is on per day basis are for normal working hours of 8.00 Hrs. shift and as when required during night also, however the vehicle should be mobilised by the agency in case of urgency /emergency within two hours of giving information by Engineer-in-Charge. (2.) Including cost of services of operating staff/driver, loading, unloading, all leads and lifts from site of work. Cost of lubricating oil, diesel/Petrol/Kerosene oil, CNG, other consumables for running the maintenance van, required tools and equipment for carrying out works mentioned below.

Collection and Removal of malba/rubbish/ garbage/ similar unserviceable dismantled or waste materials, construction waste etc. from different locations along the road footpath, berm portion and road side and disposal at temporary collection site of Sub Division/Division & any other work assigned by the Engineer-in-Charge.