Public Works Department Tender

b) 3 x 4 Sq.mm

Supplying and fixing of PVC cable management system / wall trunking with cover of following sizes including internal, external, flat single cover and T- cover , end cap and other accessories on the wall so as to make complete as reqd. a) 105 mm X 50mm

b) 50 mm X 50mm

Supplying, installation, testing & commissioning of following capacity energy saving IP-66 LED flood light fitting on angle iron frame suitable to work 230 volt AC supply complete with connection etc. with 1.5 sq.mm PVC insulated copper conductor wire as reqd at site. a) 150 watt Flood light

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply, Installation, Testing and Commissioning of energy efficient 1200 mm sweep size ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 Sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on fan box etc as required. (Make: crompton)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing of 400 mm sweep wall mounted fan complete with inbuilt Electronic Regulator, Blade, wire lead with moulded plug top etc. as reqd.

Supplying, installation, testing & commissioning of 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required at site The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram.

Supplying, installation, testing & commissioning of surface type 15 W to 18 W full window glarefree opal diffuser LED fitting of size 300 mm x 300 mm complete with all accessories i/c connections with 3 x 1.5 sq.mm PVC insulated FRLS copper conductor cable etc. as reqd.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required a) 8 way (4 + 24), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) a) 8 way (4 + 24), Double door

Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. a) Single pole

SITC of energy efficient recess mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor0.95,CRI (Ra)75, THD 10%, with APFC driver having driver efficiency 85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab.

SITC of energy efficient surface mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor0.95,CRI (Ra)75, THD 10%, with APFC driver having driver efficiency 85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab.

Providing and fixing following rating and breaking capacity and pole MCCB in existing TPN DB including, making connections, etc. as required. a) 100 Amp, 16 KA,TPMCCB with thermal megnatic release (ICU= 100% ICS)

Suppying and laying of one number PVC insulated and Al. Conductor armored power cable of 1.1 KV grade of following size direct on surface /wall as required. a) 4 X 25 Sq.mm

b) 3.5 X 35 Sq.mm

c) 3 X 10 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 35 Sq.mm (35mm)

b) 4x25 sq mm(28 mm)

c) 3 X 10 sq. mm (22mm)

SITC of exhaust fan of 300 mm sweep, 900 rpm speed with shutter & louvers in the existing opening i/c making good the damages, connection, testing & commissioning etc. as reqd.

Supplying, installation, testing and commissioning of energy efficient LED flood light luminaries of system wattages 100 to 120 W complete with accessories on the angle iron frame including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable complete etc as required The LED luminaries should confirm the following technical specifications :- a. Type of LED: High power LEDs Nichia/Osram/Cree/Philips b. driver efficiency 85% c. LED Luminous Efficacy 130lm/w d. color Index(CRI) Ra70 e. Color Temperature Cool white:5500°-6500°K f. Input Voltage. 140-270V AC, 50-60 Hz g. Power Factor(PF) =0.90 h. Surge protection = 4.0KV i. Total Harmonic Distortion(THD)= 10% j. Working Environment 0°C to 50°C;10%-90%RH k. Working lifetime: 50000hours l.IP Rating :- IP : 65/IP : 66 m. Housing and finish :-epoxy powder coated die cast aluminum housing with elegantly designed heat sink for efficient thermal management and to excellent corrosion resistant, cable gland P49 is provided at cable entry cover & high quality toughned glass.

Credit for following items a) assorted luminaries

b) Wire PVC Insulated Assorted

c) Assorted ceiling fans/Exhaust Fans

d) Assorted TPNDB with SPMCB

e) assorted Steel Conduit