Public Works Department Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Public Works Department - PWD Tender
Furnitures and Fixtures
Eprocure
Opening Date17 Sep 2024
Closing Date30 Sep 2024
Tender Amount₹ 2,68,77,124
Costs
EMD
₹ 5,37,542Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_262348_1Tender No
03/EE/Edu./C ND/PWD/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://www.pwddelhi.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
library tables/Student Work Table
Providing, supplying and placing library table/Student Work Table of overall size 1800mm(L) x 900mm(D) x 740mm(H).The worktop of the table shall be made from 25 mm thick MDF Board ( Exterior grade) with 2mm thick PVC edging matching colour with hot melt glue at 200°C open edges of work top. Understructure of the table comprises C-Frames of 1.6 mm thick M.S CRCA with Powder coating upto 40-50microns. C-frame 75mm for supporting the Top & 75mm long recess for 4 No legs of Diameter 38.1mm x 1.6 mm thick M.S ERW tube with powder coated shall be provided. The detachable legs shall be duly screwed with C- frame and recessed . (All the corners should be rounded not shown in picture.) All the above items should be as per photo, sketch, and specifications & direction of engineer-in-charge.
35
-
-
Teachers Table/Instructor's Table
Providing, supplying and placing Teachers Table/Instructor's Table of size 1200mm(L) x 600mm(D) x 725mm(H). Worksurface of the table shall be made from 18mm thick Pre Laminated wooden Ply (Lami Ply, MR grade as per IS:303) with decorative lamination(0.8mm thick) on both sides for top. All work surface edges are duly sealed with 2mm thick PVC edging of matching colour with hot melt glue at 200°C. Understructure of the table comprises Rectangular Frames Fabricated from 1.2mm thick Cold Rolled Close Annealed (IS:513), Finish of metal parts - Powder coat (Epoxy polyester). Leg and one foot rest between the base and vertical wire carrier should be Fabricated component from 38mm x 25mm x 1.2mm thick MS ERW Tube (IS:7138) with Powder coat (Epoxy polyester). Modesty panel shall be 0.8mm Thick CRCA Sheet duly poweder coated. One Side Panel made from 0.8mm thick CRCA (IS:513). Wire Carrier shall be provided, Vertical Wire Carrier along with Drawer made of 0.8mm Thick CRCA Grade D as per IS:513 and Horizontal Wire carrier under the worktop made of 0.8mm thick CRCA Grade D as per IS:513 complete powder coated. Finish: Powder coat (Epoxy polyester), Plastic Cap for Cable travel should be Injection Moulded Polypropylene. Leveler glide for Leg of Nylon 6 & MS Bolt. Drawer Unit with 3 Drawers shall be provided of size 670mm(H) X 550mm(D) X 350mm(W), Shell, drawer tray, Drawer Front, Frame Assembly of the drawer unit shall be made of 0.8mm thick CRCA (IS:513) with Powder coat (Epoxy polyester). 10 lever cam Lock shall be provided for locking. Handle shall be made from Injection Moulded Polypropylene & Leveler of Nylon6 & MS Bolt. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
70
-
-
Computer Tables Providing, supplying and placing Computer table of overall dimension 900mm(W) x 550mm(D) x 740mm(H). The base material for computer table should be 18 mm thick Lami Ply, MR grade as per IS:303) with decorative lamination(0.8mm thick) on both sides with 2mm lipping. It should provides higher resistance to heat and moisture. The understructure of the Table should be Fabricated component from 38mm x 25mm x 1.2mm thick MS ERW Tube (IS:4923) with Powder coat to the thickness of 40-50microns . The Table should be provided with a lamiply Keyboard Tray. Single Drawer is provided on the right side of the table of size 150mm(L) x 300mm(D) x 100mm(H) with lamiply facia and telescopic channels. A Shelf is provided of size 600mm(L) x 200mm(D) for keeping files. A CPU stand is in built in the understructure of size 200mm(W) x 500mm(D) and one additional support of 38mm x 25mm x 1.2mm thick MS ERW Tube (IS:4923) with Powder coat to the thickness of 40-50microns is provided at the bottom. All the above items should be as per photo, sketch, specifications & direction of engineer-in-charge.
13
-
-
Table 3Ftx2Ft.
Providing ,Supplying & placing Table of an overall size 900mm(L)x600mm(W)x750mm(H) with top made up of 25mm thick MDF board with decorative laminate on top and balancing laminate on unexposed face. The understructure (gable and modesty) is made of 18mm thick Pre Laminated wooden Ply (Lami Ply, MR grade as per IS:303) with decorative lamination(0.8mm thick) on both sides and all exposed edges sealed with matching colour 2mm thick PVC edging with hot melt glue at 200°C . Table has a provision for wire manager caps at top. All the corners should be rounded not shown in picture. The table should be as per photo, sketch, specifications & direction of engineer-in-charge.
2
-
-
Principle Chair Providing, supplying and Placing in position High Back Chair. The seat shall be made of 1.4 +/-0.1 cm thick hot pressed plywood upholsterd with fabric and moulded polyurethane foam. It shall have seat depth adjustment of 5.0 +/- 0.3cm integrated in the seat through a sliding mechnism. Seat size shall be 50.0cm(W) x 49.0cm(D). The back shall be injection moulded in glass filled polyamide which shall be upholstered with mesh fabric. The back shall consist adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0 +/- 0.1 cm. Back size shall be 50.0 cm W x 68 .0 cm H. The polyurethane foam for seat shall have a density of 55 +/- 5 kg/m³. The height adjustable armrest shall be made of polyamide structure and polypropylene housing with moulded PU armtop having an adjustment of 7.0 +/- 0.3 cm. The mechanism shall be dsigned with following features -: 360º revolving type, Centre Tilt Syncro Mechanism, 3 position (inclusing upright lock) giving option of variable tilt angle to the chair with anti shock feature. The headrest shall be injection moulded in glass filled polypropylene which shall be upholstered with foam and fabric. It shall have an adjustment of 6.0 +/- 0.1 cm and it shall be assembled over the full back chair. The Headrest shall be provided with a provision of Coat Hanger. The pneumatic height adjustment shall have an adjustment stroke of 8.5 +/- 0.3 cm. The pedestal shall be High presssure Die cast aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0 +/- 0.5 pitch centre dia. The twin wheel castors shall be injection moulded in black glass filled polyamide having 6.0 +/- 0.1 wheel dia. All the above item should be as per photo, sketch and specifications & direction of engineer-in-charge.
3
-
-
Principle Visitor's Chair
Providing, supplying and placing in position Principal Visitor Chairs. Chair Seat and Back assembly shall be made up of 1.2+/- .2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The Seat is provided with a pre-moulded inserts at the bottom for fixing Mechnism and Armrests. The back foam is designed with contouredl lumbar support for extra comfort. Back size: 50.0cm(W) x 49.0cm(H) Seat size: 50.0cm.(W) x 46.0cm(D) The polyurethane foam shall be moulded with density = 60 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. Seat and back cover provided shall be made of injection moulded in black co-polymer polypropylene vacuum formed from ABS sheets. ARMRESTS : The one piece armrests made of black integral skin polyurethane with 50-70 Shore 'A' hardness and reinforced with M.S. Insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat. The understructure is tubular frame in cantiliver type and made up of dia 2.54cmx0.2cm thick MS ERW tube and black powder coated. (DFT 40-60 microns). All complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge.
35
-
-
Teacher chair/Chairs Providing, supplying and placing of Teacher Chair/Chairs. The Seat and Back Assembly shall be made up of 1.2cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The Seat is provided with a pre-moulded inserts at the bottom for fixing Armrests. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE : 47.5cm(W) x 58.0cm(H) and SEAT SIZE : 47.0cm(W) x 48.0cm(D). The Polyurethane foam is moulded with density = 60 +/-2 kg/m 3 and Hardness = 20 +/- 2 at 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME : The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thick M.S. ER.W. Tube as per sketch for item. All the above items should be as per photo, sketch ,specifications& direction of engineer-in-charge.
102
-
-
Computer Chairs
Providing, supplying and placing of Revolving Computer Chair. The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The Seat is provided with a pre-moulded inserts at the bottom for fixing Mechnism and Armrests. The back foam is designed with contoured lumbar support for extra comfort.
BACK) SIZE: 40.0cm. (W) X 47.0cm. (H)
SEAT SIZE: 60.0cm. (W) X 42.0cm. (D).
The HR Polyurethane foam is moulded with density=60+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS:7888 for 25% compression. The one piece armrests are injection moulded from black nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5cm. thk. HR steel. The permanent contact mechanism is designed with 360°
revolving type. 14° maximum back-tilt only.Upright position locking. Tilt tension adjustment. The pneumatic height adjustment has an adjustment stroke of 11.0 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 62.0cm. pitch-center dia. (72.0 cm with castors).The twin wheel castors are injection moulded in Black Nylon. All the above items should be as per photo, sketch , specifications & direction of engineer-in-charge.
26
-
-
Lab Stools Providing and placing of fixed type Lab Stool with SS Round Top. Overall size is 480mm(L) x 480mm(W) x 560mm(H). Understructure of the stool consists of 4 Legs, circular Foot Step welded at 150mm above from ground and Top Frame. Complete understructure shall be made up of MS ERW Tube of 22mm Dia having a thickness of 1.6mm with duly powder coated 40-60microns. A Round Top of size 300+/-5mm Dia shall be fixed on the top frame made of 1mm Thick Stainless Steel (SS) with buffed Glossy finish. PVC Shoes shall be provided at the bottom of all legs to avoide direct contact of metal parts with floor. Stool shall be safe upto 120Kgs Load. All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
350
-
-
Library Chairs Providing, supplying and placing of Library Chairs for Students. The seat and back of the chair shall be made up of 1.2cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort.
BACK) SIZE: 40.0cm. (W) X 60.0cm. (H)
SEAT SIZE: 43.0cm. (W) X 39.0cm. (D).
The High Resillience Polyurethane foam is moulded with density=60+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS:7888 for 25% compression. TUBULAR FRAME : The tubular frame is made up of Dia 2.54cm+/-0.03cm x 0.2+/-0.016cm Thick M.S. E.R.W tube and black powder coated. All the above items should be as per photo, sketch and specifications & direction of engineer-in-charge.
150
-
-
M.P. Hall chair
Providing supplying and placing M.P Hall chair. The seat and back shall be made of injection moulded polypropylene shell. The seat shall be upholstered with high resiliance polyurethane foam 19mm thick having density 40kg/m³ with Fabric upholstry . The PP shell shall be supplied in perforated position and fixed with main frame. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated tubular pipe frame having cross-section area 25mm X 12mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 400±10 mm(D) X 410±10 mm(w) and back size sall be 605±10 mm(W) X 370±10 mm(H) from seat. Overall height shall be = 820±10 mm & overall depth = 565±10 mm. All the above items should be as per photo, sketch and specifications & direction of engineer-in-charge.
200
-
-
Sofa Set(3 +1+1) Providing, supplying and placing sofa set(3+1+1). 3 Seater sofa having overall size of 1750mm(L) x 870mm(D) x 730mm(H) and 1 Seater Sofa having overall size of 920mm(L) x 870mm(D) x 730mm(H) and Seat Height of 390mm upholstered with Synthetic leather with seasoned solid wood frame material of size 50mm x 50mm, Seat of PU foam with foam density of 28 Kg/cubic cm and Back Foam density of 22 kg/cubic cm and ( 150mm thick) webbing material Nylon of 50 mm thickness including springs hassen cloth, cotton. Hard wood facia 18mm thick solid wood is to be provided on the Arm facia. All the above items should be as per photo, sketch , specifications & direction of engineer-in-charge.
5
-
-
Lockers Providing, placing/installing of Lockers manufactured to the specification provided below - Overall Size : 1150mm(W) x 600mm(D) x 1830mm(H). Construction : Rigid knockdown construction. Material : CRCA 0.8 mm Thickness. Locking : 10 Lever Cam Lock arrangement. Shelf Uniformly Distributed Load Capacity per each shelf level is 35 Kg maximum. Finish : Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Handle / Label holder • Aesthetically appealing Snap fit ABS plastic handle. Plastic label holder for identification. Ventilation Attractive punched pattern for ventilation. . All the above items should be as per photo, sketch and specifications & direction of engineer-in-charge.
2
-
-
Classroom Almirah
Providing and Placing in position Storage Unit for Classroom of overall size 1000mm(W) x 500mm(D) x 2025mm(H) including levellers. The storage unit shall be divided into 2 parts of 500mm(W) each by a vertical partition of 1980mm(H). The storage units shall be stacked widthwise to form a row of storage having a common side panel. The construction of the storage units shall be aesthetically appealing and knock down or welded. Legs shall be fitted in the floor units with screw type leveller and material shall be from combination of CRCA sheet of 0.8mm thick. The storage units shall be provided with height wise adjustable 4 shelves mounting with slots of pitch 25.4mm from top to bottom at all internal corners in classroom almirah , each shelf shall have a load capacity of 40 kg Uniforming Distributed Load. The storage will have steel 2 Nos Hinged Door with kunckle hinges and individual lock for each door. Each door shall be provided with a handle Ergonomically designed with Aesthetically appealing made from Aluminium dia cast mazak handle.The complete floor units shall be provided with 3 way locking and thickness of rod shall not be less than 8 mm and Finished with Epoxy Powder coated to the thickness of 50 microns(+/-10). All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
57
-
-
Office Almirah Providing, supplying & placing metal storage with locker.The overall size of the storage shall be 910-916mm (W) x480 -486mm (D) x 1980-1981mm (H). The contruction shall be welded/rivetted construction with 0.7mm thick CRCA for shelf and 0.8mm thick for back. The door shall be made of 0.8mm thick CRCA and all other metal component shall be made of 0.9mm thick CRCA. Stiffners shall be provided wherever required in the almirad to prevent any deflection/deformations on the outer body. A locker shall be provided inside the almirah of size 400mm(W)X300mm(H) with locks & door fixed on hinges .The locking and handle of the storage shall be mazak handle with three way locking mechanism and thickness of rod shall not be less than 8 mm The Alimrah should have 2 welded Legs along the depth of the Almirah of 75mm Width x 125mm Height made up of 1mm thick galvanized sheet which acts as a understructure of the storage. The shelving shall be height adjustable and shall have a load capacity of 40kg. The product shall be epoxy powder coated to the thickness of 50 microns. All the above items should be as per photo, sketch and specifications & direction of engineer-in-charge.
13
-
-
Wall Mounted Storages
Providing and placing Wall Mounted Storage Units with Metal Body and Wooden Shutters. Storage Cabinets to be of complete modular design Consisting of Cabinet Frame, Wooden shutters, shelves and stainless steel D shape S.S handles. Cabinet frame to be of 0.8mm +/- 0.07mm CRCA MS sheet as per IS-513 with Horizontal Stiffners made from 1.2mm +/- 0.09mm thick CRCA as per IS-513. Wooden Shutters are made from 18mm+/-0.5mm thick exterior grade Pre-Laminated Particle Board as per IS specifications. All the edges of the door are duly sealed with 2mm thick PVC Edge Banding. Heightwise 1No CRCA adjustable shelf shall be provided in each storage having a load carrying capacity of 25kg UDL. Hinges to be spring loaded with CED coating with soft closing mechanism. The complete M.S. material of cabinet to be pretreated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat to be 50 +/-10 microns(minimum) as per specification. Each unit should have a locking facility with 10Lever cam lock mechanism. One no. sheet of required size provided inside the storage unit end to end to provide smooth surface inside the storage. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
a. Storage Unit of size 600mm(W) x 325mm(D) x 750mm(H)
12
-
-
b. Storage Unit of size 750mm(W) x 325mm(D) x 750mm(H)
6
-
-
Filing Cabinets Providing, supplying and placing Office Filing Cabinet with Glass Sliding Doors of overall size 900mm(W) x 600mm(D) x 1830mm(H). Filling Cabinet Construction & Material shall be Rigid Knock down construction made from Prime Quality CRCA Steel of 0.8 mmThick. Sliding Door Arrangement shall be provided for Full height Sliding Door with top hanging arrangement to prevent derailment. Each door shall be provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. Lock shall be Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking and Handles shall be Plastic flush & recessed handle. Each Cabinet shall be provided with Height wise Adjustable Shelf Mounting with Uniformly Distributed Load Capacity per each full shelf of40Kg maximum. Cabinet shall have 4 Nos. of Adjustable Shelves. Leveler shall be provided at the bottom of the Cabinet of Screw type leveler with hex plastic base to add in unit height min 0.8mm & additional 5mm max for adjustment. Complete Filling Cabinet shall be Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10) with front glass of 4mm Thick to see through the objects placed. All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
2
-
-
Display Rack Single Stack - Main Unit (900X350X2100) Providing, supplying and placing of open display racks for books. The rack is prepared from Rigid Knockdown construction in which material shall be CRCA Sheet of 0.8mm Thickness with Epoxy Polyester Powder coated finish to the thickness of 50 microns (+/-10). Stackability: The add-on units can be stacked width wise to form a bank of racks having common side panel. Accessibility: From Front in single sided and Front & Back in double sided racks. Number of Adjustable shelf: 5Nos adjustable shelves shall be provided in single sided racks on one side i.e. Total 6 Loading levels. and 10Nos adjustable shelves shall be provided in double sided racks on one side i.e. Total 12 Loading levels. Uniformly Distributed Load Capacity per each shelf shall be 40 Kg maximum. Shelf back is provided with CRC sheet 0.8 mm upto half height of display rack in order to supports to books from felling back side. Label holder & range indicator Label Holder & Range indicator on each main unit for inserting labels. All the above items should be as per photo, sketch and specifications & direction of engineer-in-charge.
30
-
-
Bookcase
Providing and placing in position 4 Door Bookcase of size 910mm(W) x 320mm(D) x 1740mm(H). It has Rigid Knock down construction and Prime Quality CRCA Steel -Top, Back & Side Panels shall be made from 0.7mm high yield strength CRCA & rest in 0.8mm CRCA. Each Door has 6 Lever Cam lock with common key. Each Door has 3mm thick transparent glass for clear inside vision secured in a Metal Frame through rubber gasket. Each door shall have a Scissor mechanism for receding inside the top of respective compartment & ensures parallel & smooth movement. Each door shall have plastic side end caps as Handle which shall be for easy to grip, each compartment shall have a storage shelf with Uniformly Distributed Load Capacity per each shelf shall be 40 Kg maximum. The finish shall be Epoxy Polyester Powder coated to the thickness of 50microns (+/-5 micron). All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
36
-
-
Newspaper Stand/Display Stand cum Storage Unit Providing, supplying and placing in position News Paper Stand/Display cum storage Unit of overall size 900mm(W) x 600mm(D) x 1830mm(H). Construction of the unit shall be Rigid Knock down construction. Panels of the unit shall be 0.8mm Thick. Front frame shall be 0.8mm Thick CRCA Steel duly powder coated 50microns(+/-10). Each unit shall have 5 Retractable display Metal Trays fixed at an angle for easy viewing. Tray shall be Receding type to access the storage behind the tray. Retractable feature of each Tray is achieved through Sliding on plastic rollers. Uniformly Distributed Load Capacity per each shelf is 40Kg maximum. The unit shall be provided with Screw type leveler with hex plastic base of height 8mm with an adjustable height of 5mm max for. The complete unit shall be Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
6
-
-
Small Rack
Providing, supplying and placing of Slotted Angle Racks of Overall Size 900mm(H) x 900-910mm(W) x 375mm(D). Each rack shall be provided with 3 panels for loading having 40kgs Load carrying capacity (Uniformly Distributed Load) per panel. Open type Rack system consists of Angle, Decking Panel, Corner plate, Nuts & Bolts. Angles : Material of Angles is as per IS 10748. The thickness of the angles when made from sheet steel shall be 2 mm. Angles shall be of rolled formed construction and free from twist, sharp edges and burrs. Angles shall have holes provided at a pitch of 19.05mm. The holes shall start at 19 mm centers from each end. Size of the Angles should be 40mm x 40mm x 2mm(Thick). Panels : Material of panels is as per IS 10748 / IS5986- Fe 410. Panels shall be 6 bend panels and shall be made from mild steel sheets not less than 0.8 mm in thickness with lipped flanges. Width of flange being 31mm and depth of lip 17mm. The panels shall have 9mm holes for corner plates. Panels will have 6 bends &get bolted to the Angles at each of the four corners according to Minimum of 100 Kg load per level. Corner Plates (Gussets): Material of corner plates is as per IS 513D. 8 Nos Corner Plates, four on each face shall be fitted to the open type rack. They shall be made of mild steel sheet and be provided with a powder coated finish. Corner Plates of 2.00 mm thickness to be provided for ensuring rigidity of the structure. Nuts &Bolts : All fasteners like nuts, bolts, clips etc shall be supplied in galvanised condition for protection against environment and corrision. All the above items should be as as per photo, sketch and specifications as per the direction of engineer-in-charge.
6
-
-
Modular Workstations
Providing, supplying and placing in position Modular Workstations with Fabric Screen as per site requirement. The understructure of the workstation comprises of Powder Coated Leg Assemblies, Cross connectors. On the matrix of Legs and Cross connectors, the Work-surfaces are fixed. Table Legs are fabricated by rectangular holo tubes by CO2 welding MS ERW Tube 50mm x 50mm x 1.2mm thick (as per IS: 7138 ERW). The base of the MS tube is fitted with a Glide plate over which an M8 Leveler is fitted, which allows for adjustment of the height by 10mm and coated with minimum 60 micron thickness of epoxy powder coating. Worksurface shall be made of exterior grade of approved shade made from 25mm thick Pre-Laminated MDF Board conforming to IS: specifications of approved shade. All the edges of work surface shall be provided with machine pressed 2mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be provided with a 50mm Dia Grommet cut-out for wire management and a horizontal wire carrier fitted below the worktop to carry wires along the length of the workstation. The wire carrier is made with a combination of 3mm and 5mm MS Rod (IS: 9550 Bright Bar) along with 5mm thick MS Plate (IS: 2062, 5mm HR) duly powder coated of required length or as per manufacturer’s specifications. The workstation shall be provided with a full length (end to end) Fabric screen of 600mm(H) x 23mm Thick made of Plain Particle board uphostered with Fabric fitted in a aluminum extrusion (HE-9, IS : 63400) frame. The screen assembly is fitted to the Understructure and worktop by brackets made of 3mm thick MS Plate (IS:2062 3mm HR) which are fabricated by welding. The bracket is powder coated matching to the colour scheme of understructure. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
a. Workstation of size 1200mm(L) x 600mm(D) x 1200mm(H) with Worktop Height 750mm
6
-
-
(b). Workstation of size 1500mm(L) x 600mm(D) x 1200mm(H) with Worktop Height 750mm
6
-
-
Laboratory Work Bench – Understructure
Providing, placing/installing of Laboratory work bench Understructure manufactured to the specification provided below - D-Frames Assembly, Horizontal members with Granite Top and Cover Panels. These understructures shall be of 750mm or 900mm height as per site requirement or as per the direction of Engineer-in-Charge. The Top surface area of under structure shall be measured for payment. The understructure shall comprises of following components :-a. D-Frame AssemblyAll D-Frames assemblies shall be manufactured from standard hollow metal sections; confirming to latest I.S. Code 7138 (Indian Standard specification for steel tubes for furniture) and all sheet metal components shall be of CRCA confirming to latest IS Code 513. The dimensions of D Frame shall depend upon the depth of the understructure. The overall depth (F) of D-Frame shall be 705mm for 750mm Depth Structure and 555mm for 600mm depth (as per Drawing) and Depth of Extended Frame (G) shall be 235 mm for 750mm Depth and 160mm for 600mm depth (as per drawing). All frame-work shall be pre-treated with superior powder coated finish with 40-60 micron thickness. The structure of D-frame with horizontal units shall withstand 10 degree tilt (backwards) without toppling. The D-Frames shall have a provision to fix suspended storage cabinets. Side frame shall be of welded MS ERW tube of dimension 30 x 30 x 1.6mm thickness. Bracket for pipe : MS CRCA 2mm thick. Wall bracket : MS CRCA 2mm thick. Levelling screws: 4 nos. of M-10 levellers (MS + Nylon) Adjustments possible with range 20mm. Anchoring bolt of Hilti make or equivalent.b. Horizontal MembersHorizontal members shall join two D-Frames to form the structure. Horizontal members shall be made from rectangular pipes of 1.6mm thickness. Cross-sectional dimensions of the pipe shall be 30 x 30mm with a minimum of 1.6 mm thickness. They shall be made of CRCA MS sheet powder coated of 40-60 micron thickness. Horizontal members connect two D-Frames together by using C-clamps/U-clamps together with the D-Frames and Horizontal Members . The skeletal structure of the work-bench is formed on which the worktop shall be placed and the hanging-type storage cabinets shall be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They shall be available in various widths of 600mm, 600mm, 900mm, 1050mm, 1200mm, 1350mm, 1500mm, 1650mm and 1800mm (Tolerance +/- 10mm). These horizontal units together constitute a table set.c. Cover PanelsAll side cover panels and back panels, filler panels shall be made from CRCA MS panels of minimum 0.8mm thickness with epoxy powder coating with thickness of 40-60 microns, bracket of min.1.2mm thickness.d. Work TopThe complete structure shall be provided with a Worktop of 20mm (+/- 2mm) thick Jet Black Granite. The exposed edges of the worktop shall be chamfered and polished . The bottom of cantilever portion of the worktop shall be polished and V-groove shall be provided throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material shall be neoprene mat of 6 mm thickness. All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.
180
-
-
Work bench Storage Cabinets
Providing, placing/installing of work bench Storage Cabinets manufactured to the specification provided below - The storage cabinet shall be Welded body with load bearing members such as top, bottom and stiffeners made of 0.8mm thick CRCA Sheet. A drawer separator shall be provided made of 1.2mm thick CRCA sheet. The storage unit shall be provided with a shelf made of 0.8mm thick CRCA sheet which is adjustable to 6 slots of 40-60mm. Each shelf shall have load carrying capacity of 40 kgs. Shutter provided is over-closing with 270 degree opening. It has a sandwich construction with profile as a sound dampener. The drawer shall be provided as per the manufacturers specifications and direction of Engineer -in-Charge. The complete storage unit shall be powder coated with thickness of 40-60 microns and is suspended from tubular understructure, with an overlay shutter. The cabinet has a corrosion resistance magnetic strip as shutter catch, shutter and drawer are equipped with 180 degree cam lock. Semi recessed handle and five knuckle overlay hinge(SS-304) with 270 degree opening. Drawer and Shutter shall be provided with a lock 180 Degree cam with 4mm thick lever. Cabinet fixing brackets shall be of 2mm thickness. Note:- The cost of storage cabinet does not includes the cost of basic understructure, the cost of understructure shall be paid in Item No 1. (All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.)
Work bench Storage Cabinets
Providing, placing/installing of work bench Storage Cabinets manufactured to the specification provided below - The storage cabinet shall be Welded body with load bearing members such as top, bottom and stiffeners made of 0.8mm thick CRCA Sheet. A drawer separator shall be provided made of 1.2mm thick CRCA sheet. The storage unit shall be provided with a shelf made of 0.8mm thick CRCA sheet which is adjustable to 6 slots of 40-60mm. Each shelf shall have load carrying capacity of 40 kgs. Shutter provided is over-closing with 270 degree opening. It has a sandwich construction with profile as a sound dampener. The drawer shall be provided as per the manufacturers specifications and direction of Engineer -in-Charge. The complete storage unit shall be powder coated with thickness of 40-60 microns and is suspended from tubular understructure, with an overlay shutter. The cabinet has a corrosion resistance magnetic strip as shutter catch, shutter and drawer are equipped with 180 degree cam lock. Semi recessed handle and five knuckle overlay hinge(SS-304) with 270 degree opening. Drawer and Shutter shall be provided with a lock 180 Degree cam with 4mm thick lever. Cabinet fixing brackets shall be of 2mm thickness. Note:- The cost of storage cabinet does not includes the cost of basic understructure, the cost of understructure shall be paid in Item No 1. (All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.)
a) Storage unit of Size 600mm(W) x 600mm(D) x 675mm(H) with 1 Drawer and 2 Shutters
77
-
-
b). Storage unit of Size 600mm(W) x 600mm(D) x 675mm(H) with 1 Drawer and 1 Shutter
60
-
-
Laboratory Work Bench - Sink Unit
Providing, placing/installing of Sink Unit manufactured to the specification provided below - size 600mm(W) which shall comprises of Sink Cabinet, Polypropylene Sink Unit and 1-Way Goose Neck 360 Degree revolving Faucet.as per followingSink CabinetSink cabinet. :- The Sink cabinet shall be Welded body with load bearing members such as top, bottom and stiffeners made of 0.8mm thick CRCA Sheet. The cabinet unit shall be provided with Pair of Shutters. Shutter has a sandwich construction with profile as a sound dampener. The complete unit shall be epoxy powder coated with thickness of 40-60 microns and is suspended from tubular understructure, with an overlay shutter. The cabinet has a corrosion resistance magnetic strip as shutter catch. Shutter shall be provided with semi recessed handle and five knuckle overlay hinge (SS-304) with 270 degree opening. Cabinet fixing brackets of 2mm thickness. The cost of sink cabinet does not includes the cost of basic understructure as the cost of understructure shall be paid in Item No 1.All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.b. Polypropylene Sink AssemblyProviding and fixing Polypropylene Sink with PP Waste, Anti-Siphon Bottle Trap & Flexible Drainage Pipe. Sink bowl shall be Polypropylene Molded made up of 5mm thick high density and elastic poly propylene with good resistance to organic solvents. Standard bowl size shall 600mm(L) x 400mm(W) x 300mm(D).c. 1 Way Water FaucetProviding and fixing 1-Way 360 Degree Revolving Water Faucet. Faucet fittings shall be laboratory grade. Water faucet and valve bodies shall be cast red brass alloy or bronze forgings, all fittings shall be powder plated. Brass as per IS:319, Pipe as per : IS:407,O utlet nipple in PP construction. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Gooseneck spout with 360 degree rotation with 500000 life cycles. Pneumatic test at 250 psi, hydraulic test at 125 psi, bursting test at 500 psi. Coating to be glossy epoxy fusion bond. The Faucet shall be fixed to the existing water outlet by providing PVC connection with brass unions of required length. All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.
31
-
-
Laboratory Tables - Reagent Racks
Providing, placing/installing of Laboratory Tables Reagent Racks manufactured to the specification provided below - size 1200mm(L) x 300mm(W) x 680mm(H):- Reagent Racks shall be complete modular design consisting of 2 stage horizontal storage shelves made of 1.6 mm thick frame. Shelf : Fixed-Type reagent shelves have 1.6mm thickness consisting of 2 stage horizontal storage shelves made of 1.6 mm thick frame of CRCA MS sheet with epoxy powder coating and shall have 4 nos. plates (containing 03 module each) for electrical switches and sockets including necessary wiring etc. It shall have provision for placing Granite pieces. Cutout for 3 module plate to be provided. All the members are knock down and can be restructured. The metal part cutout shall be of 1.00mm thickness. The finish shall be coating of 40-60micron thickness. Load carrying capacity of 70kg for Island table. All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.
6
-
-
Work Tables - Electrical Trunking
Providing, placing/installing of Electrical trunking manufactured to the specification provided below - size 220mm(L) x 86mm(D) x 90mm(H) including 6 Module Plate with 16A, 1 Way electrical switches & 6/16A, 6 Pin Shutter Sockets, Electrical Wire (2.5mm), Drilling of 2Nos x 12mm Holes & 1No x 25mm Holes on Granite Top for fixing and passage of wires with necessary fittings on the existing Lab Benches Granite Tops as per the site requirement. Electrical wires shall be covered with Flexible Pipe below the Table Top till the length of the Table. Trunking top panel, bottom panel and body should be made from minimum of 0.8mm thick CRCA MS sheet with pure epoxy powder coating of 40-60 microns. The front surface that houses the electrical points should have a slope. Electrical wire should be connected in series with the adjacent Trunking upto the source within the Table Length. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
24
-
-
a). Work Tables – Two Way Gas Valves
Providing and fixing laboratory grade 2 Way LPG Gas Valve made from high quality brass forging grade as per IS 8737 2007 and machining grade as per IS:319 to avoid porosity and leakage. Taps are powder coated with glossy epoxy fusion bond. Pneumatic test at 250psi, hydraulic test at 125 psi, bursting test at 500psi. Valves should be identified with service indexes in the color coding as per DIN 12920. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
18
-
-
b). Work Tables – One Way Gas Valves
Providing and fixing laboratory grade 1 Way LPG Gas Valve made from high quality brass forging grade as per IS 8737 2007 and machining grade as per IS:319 to avoid porosity and leakage. Taps are powder coated with glossy epoxy fusion bond. Pneumatic test at 250psi, hydraulic test at 125 psi, bursting test at 500psi. Valves should be identified with service indexes in the color coding as per DIN 12920. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
24
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements