Public Works Department Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Dec 2024
Closing Soon9 Dec 2024
Tender Amount₹ 1,66,96,709
Costs
EMD
₹ 3,33,934Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Comprehensive Maintenance Of 32 Quarters Of Type-iv And 32 Quarters Of Type-v, At Sunder Apartment,paschim Vihar And Other Office Institutional Buildings Under Sub Division Wb-15, Division West Building, New Delhi During Session 2024-27
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_265586_1Tender No
22/SE/WMC/PWD/2024-25, 55/EE/PWD/WB-1/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://www.pwddelhi.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
73
510
37299
Providing and fixing Ist quality ceramic glazed wall tiles conforming to 1S: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
631
1267
800076
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
95
3473
330016
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm dia
202
525
106161
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to steel windows by welding
806
219
176595
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
40
59
2378
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
30
32
977
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.
250 mm weighing not less than 150 gms
36
61
2198
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
36
74
2673
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
24
260
6254
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
24
115
2764
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete.
24
100
2419
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
36
66
2385
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
40
5207
208298
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
-
-
-
With non decorative veneering on both sides
81
1809
146561
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angles 40x40x6 mm for diagonal braces
29
5804
168326
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1900
131
248995
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
137
141
19413
Welding by gas or electric plant including transportation of plant at site etc. complete.
2240
3
8288
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1154
772
891350
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
-
-
-
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
32
1133
36274
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
45
1064
47909
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
257
1330
341810
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
890
1553
1382571
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
63
3186
200762
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
83
377
31324
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 coarse sand)
510
343
175262
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
2900
160
465740
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work.
1480
155
230732
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5800
156
905090
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
One coat
6900
92
634800
Two coat
3000
137
412350
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
5800
19
114550
Finishing walls with Acrylic Smooth exterior paint of required shade
-
-
-
Old work (One or more coat applied @ 0.90 Itr/10 sqm).
6700
80
540355
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
With cement mortar 1:4 (1cement: 4 coarse sand)
530
560
297065
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
60
108
6498
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm diaupto 300mm
150
340
51113
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.
27
134
3621
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.
(a) Internal Work- Exposed on wall
188
3
611
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
8
3551
28410
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
64
143
9184
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
600
73
44040
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1050
54
57383
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
60
263
15837
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
36
3081
110950
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
12
6767
81209
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
25
6515
162889
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
20
1879
37584
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm
20
4940
98816
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
20
1190
23813
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
30
103
3117
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
30
1361
40854
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia. Sand cast iron S&S pipe as per IS: 1729.
137
1151
157810
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
-
-
-
100 mm dia.
42
198
8322
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia
Sand cast iron S&S as per IS - 1729
35
598
20948
Providing and fixing plain bend of required degree.
-
-
-
100 mm dia
Sand cast iron S&S as per IS - 1729
18
470
8468
Providing and fixing collar :
-
-
-
100 mm
Sand cast iron S&S as per IS - 1729
25
463
11584
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
20 mm nominal dia Pipes
185
537
99456
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
-
-
-
25 mm nominal dia Pipes
158
355
56153
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
-
-
-
20 mm dia. nominal bore
161
437
70405
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
20 mm nominal bore
16
539
8639
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
30 cm length
15 mm nominal bore.
32
85
2720
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
Circular tank
4000
11
44000
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
32
506
16218
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
24
820
19697
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
64
574
36755
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
128
74
9574
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre:
-
-
-
100 mm diameter C.I. pipe
108
332
35910
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
12770
153247
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
6889
137796
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
25 mm average thickness
300
126
38025
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bars above 12 mm diameter
488
16
8028
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
-
-
-
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
300
141
42360
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge.
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.
-
-
-
25mm thick in Grade M 25 with cement content not less than 330 kg per cum
300
746
224070
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.
300
902
270765
Modified Estimated Cost after using Correction factor on DSR 2023 on A/c GST @ 0.973 on Rs. 1,13,08,394/-
1
-305327
-305327
Granite work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (venner work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid separately).
121
4292
519344
Providing and fixing stainless steel expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 100 x 8mm
200
129
25962
Credit for Dismantled steel work
402
-35
-14070
Credit for Dismantled C.I work
494
-34
-16796
PART-B (SUPPLY OF MATERIAL TO ATTEND DAY TO DAY COMPLAINTS THROUGH W.C. STAFF OR OUTSOURCED STAFF)
-
-
-
Supply and stacking of following building material opf approved brand and manufacture (bearing ISI Mark and full filling relevant standards of ISI specification) at site, sample of each and every material has to be got approved from the Engineer-in-charge in writing before bulk supply and incase of paint, OBD and similar material vouchers are also to be deposited along with material. Payment will be made only after supply of all the material in full and good condition at once.
-
-
-
Ordinary Portland Cement 43 grade (JK, ACC, BIRLA, SHREE)
1.5
6540
9811
White Cement (J.K, Birla)
0.3
13319
3996
Dehradun white lime
0.45
824
371
White lead (Safeda) (500 grm each)
5.4
241
1302
Coarse sand (zone III)
4.6
1839
8461
C.I. mouth, brass ferrule 15 mm dia
4.8
177
852
Mirror of superior make glass 60x45 cm
21
570
11987
G.I. Pipe (Jindal or equivalent)
-
-
-
15 mm dia metre
58
135
7872
20mm dia. Nominal bore
44
176
7758
25mm dia. Nominal bore
49
249
12245
32mm dia. Nominal bore
26
313
8146
50mm dia. Nominal bore
13
367
4782
G.I. Union
-
-
-
15 mm nominal bore
62
50
3146
20 mm nominal bore
62
76
4719
25 mm nominal bore
62
158
9831
50 mm nominal bore
8
418
3349
Polyethylene water storage tank with cover and suitable locking arragement (500,1000 & 2000 litre capacity) (Sintex, Lotus, Star, Sheetal)
5000
8
41250
Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore
190
48
9158
S.W. gully trap P type 100x100 mm
24
161
3866
Vitreous china flat back wash basin 630x450 mm
22
1012
22270
Vitreous china Indian type w.c. pan size 580 mm
22
634
13954
Vitreous china pedestal type water closet
17
1369
23290
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
54
407
21988
Sand zone V (Jamuna)
5
1674
8372
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700mm i/c PVC waste fittings
110
34
3768
Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
140
48
6748
C.P. Brass bibcock 15 mm
28
418
11721
C.P. Brass long nose bibcock 15 mm
14
684
9590
C.P. Brass long body bibcock 15 mm
14
672
9412
C.P. Brass stop cock (concealed) 15 mm
22
564
12419
C.P. Brass angle valve 15 mm
28
479
13426
Aluminium T or L sections ( Snap beading)
22
251
5526
P.V.C. automatic flushing cistern 10 lts capacity
22
691
15209
15mm PTMT Bib Cock (Prayag or equivalent)
90
88
7992
PTMT pillar cock (Prayag or equivalent)
90
158
14270
PTMT - Waste Coupling 31/32 mm
140
44
6216
PTMT - Waste Coupling 38/40 mm
160
50
8118
PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball
52
100
5211
PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball
22
152
3349
15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts
210
69
14652
Stainless steel screws
-
-
-
Stainless steel screws 50 mm ( 100nos per pkt.)
6
405
2436
Stainless steel screws 40 mm "
4
342
1370
Stainless steel screws 30 mm "
4
323
1294
Stainless steel screws 20 mm "
4
225
903
PTMT Stop cock - 20mm
13
129
1682
G.I. Socket (Unik, R, KS)
-
-
-
15mm dia. Nominal bore
47
34
1610
20mm dia. Nominal bore
47
50
2385
25mm dia. Nominal bore
47
65
3100
50mm dia. Nominal bore
4
95
381
G.I. Elbow (Unik, R, KS)
-
-
-
15mm
52
38
1979
20mm
52
57
2968
25mm
5
82
412
50mm dia.
7
104
728
G.I Nipple (Unik or equivalent)
-
-
-
15mm dia, 50 mm long
48
31
1522
15mm dia, 100 mm long
48
38
1827
15mm dia, 150 mm long
48
40
1948
15mm dia, 230 mm long
48
45
2192
20mm dia, 50 mm long
48
38
1827
20mm dia, 100 mm long
48
44
2131
20mm dia, 150 mm long
48
48
2314
20mm dia, 230 mm long
48
53
2557
25mm dia, 50 mm long
48
40
1948
25mm dia, 100 mm long
48
44
2131
25mm dia, 150 mm long
48
52
2496
25mm dia, 230 mm long
48
71
3410
50mm dia, 50 mm long
4
71
284
50mm dia, 100 mm long
4
84
340
50mm dia, 150 mm long
4
91
365
50mm dia, 230 mm long
4
98
396
Hexa Nipple
-
-
-
15mm dia. Nominal bore
32
32
1055
20mm dia. Nominal bore
33
57
1884
25mm dia. Nominal bore
33
73
2428
50mm dia. Nominal bore
5
88
444
Tank Nipple (Unik, R, KS)
-
-
-
15mm dia. Nominal bore
48
69
3321
20mm dia. Nominal bore
48
101
4871
G.I. Reducer Socket (Unik, R, KS)
-
-
-
20mm X 15mm dia. Nominal bore
48
57
2740
25 mm to any smaller size
48
82
3958
G.I. Tee
-
-
-
15 mm dia nominal bore
110
38
4187
20 mm dia nominal bore
45
50
2283
25 mm dia nominal bore
45
65
2968
32 mm dia nominal bore
45
91
4110
50 mm dia nominal bore
4
98
396
Soot gola (Pkt of 24 Nos.)
17
120
2049
M.Seal (100 gm pkt)
17
405
6901
PVC Water Tank Cover (500 Litre capacity)
270
241
65075
G.I. Plug
-
-
-
15mm
32
17
568
20mm
32
25
812
25mm
32
44
1421
50mm
6
32
198
Waste jali
52
164
8575
C.P. Garbage Jali 75mm (floor trap)
52
71
3694
C.P.Jali 100mm (floor trap)
108
95
10275
Supplying of Glass Putty
108
45
4932
Galvanised wire mesh
108
329
35619
uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe : size 75 mm dia
32
93
3004
uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe : size 110 mm dia
74
180
13330
UPVC bend 87.5° 75 mm bend
22
48
1060
UPVC bend 87.5° 110 mm bend
34
79
2717
UPVC plain shoe 75 mm bend
24
36
883
UPVC plain shoe 110 mm bend
43
63
2727
UPVC pipe clip 75 mm bend
80
19
1522
UPVC pipe clip 110 mm bend
80
20
1624
PART-C (DEPLOYMENT OF OUTSOURCED STAFF TO CARRIED OUT THE DAY TO DAY COMPLAINTS)
-
-
-
Attending various day to day complaints of SEWERMAN, rectifying the defects by deploying sewer man when required, as per detail below along with necessary T & P by cleaning of blocked rain water pipes, soil / waste pipes, gully traps, floor traps, house drain. SW drain of any dia, manholes, road gully chamber etc. including removal of malba as foreign matters, girt, kanker, rubbing etc. as per directed by engineer-in-charge complete and maintenance of all services and upkeep properly. However all stores internal fitting / fixtures etc. required shall be supplied by the department free of cost at site (duty of sewer man is taken as 8 hrs. equal to 1 day on job).
36
20319
731484
Providing services of BELDAR for necessary assistance for the timely safe and successful operating of the job of Plumber /Carpenter / mason as per work requirement of these tradesman (beldar / coolie). The duty hour of the unskilled shall be treated as 8 hours equal to one day job.
108
20319
2194452
Attending various day to day complaints of CARPENTER rectifying the defects by deploying Carpenter/ Aluminium fitter along with necessary T & P for joinery work such as repairing of doors , windows, cupboards, pelmets fittings, section windows, aluminum fixture and utilities, replacement of windows glass panes, looking mirrors, glass shelf, towel rods, towel ring, hooks , door closure, door spring, plying, board, panel, beadings, battens and bottom/ lock, top rails and styles of doors, fittings etc. all complete as per direction of Engineer-in-charge for all floor and levels ( The required materials will be issued by the department free of cost). The job includes removal of malba and dismantled material shall be deposited to the deptt. Immediately after repair. The duty hour of the carpenter shall be treated as 8 hours equal to one day job.
36
22393
806148
Attending various day to day complaints of MASON, rectifying the defects by deploying mason when required, as per details below along with necessary T & P for repair of plaster, flooring, ceiling or any other cement repairs works as directed by engineer-in-charge complete and maintenance of all service and upkeep properly. However all store internal fitting/fixtures etc. required shall be given supplied by the department free of cost at site (duty of mason is taken as 8 hrs. equal to one day job).
36
22393
806148
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%