Public Works Department Tender

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin- Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing walls with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Disposal of Malba from site to designated place beyond NDMC Limits.

Providing & fixing in position Veneer paneling as per detail for wall. Base shall be with 18 mm OSL HDHMR Board screwed through lugs on wall with lipping of 4 mm thk. Veneer (centuary or equivalent brand) on outer exposed surfaces and teak wood moulding whereever required for design. The job shall include paneling on plain wall feature, boxing, teak wood moulding complete and niche if required as per design approved by concerned authority. The work will be done as per the design approved by engineer incharge.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood. 50 x 20 mm

Providing and fixing of decorative panelling/wall hanging of CNC Jali cutwork done on 12 mm thick both side teak ply including frame made of 12 mm ply lipped with 4 mm thick veneer (century or equivalent) of approved design complete job excluding polish. The work shall be done as per the design approved by engineer incharge.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Labour engaged for moving furniture, cleaning and disposal of serviceable & unserviceable material within 50 meters lead as per direction of Engineer-in-charge and for other required works at site

Providing and fixing HDF wooden laminated flooring 12mm thick of AC-5 HDF grade of "Action Tesa" or equivalent brand with 0.20 mm thick Polyurethane Sheet and 2mm thick PU foam as per approved colour, shade and design complete as per direction of Engineer-in-Charge.

Providing and fixing 100mm skirting made of 12mm thick wooden laminated flooring of "Action Tesa" or equivalent and fixed with all necessary etc complete as per dirction of Engineer-in-Charge.

Providing and fixing 12mm thick profile with wooden flooring of "Action Tesa" or equivalent make complete as per dirction of Engineer-in-Charge.

Providing and fixing Wooden Twist Antique Traditional Floral Design solid Wood Carved Decorative Wall Standing Frame with 5mm thick mirror with 4 mm back ply/HDHDMR board behind complete job. Size, shape and design of mirror will be approved by engineer in charge.

Providing and fixing of premiufibre sheet 4mm thick over MS frame with nails and screws including wastage complete job.