Public Works Department Tender

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, Mild steel and medium tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

12 mm thick cement plaster on rough side of brick wall in 1:6 mix

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete :Size 600mm x 600mm

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels ,Granite of any colour or shade

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer,I.C water proofing primer over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing indoor louvers/ panelling( water proof, termite proof, anti corrosive, no polishing required) for walls decors PVC make of approved design and make upto a height of 5 feet including skirting and beading , fixing,nails, screws, wastage complete job.

P/F of various electric fitting and fixtures,all items to be specified by the Engineer in charge ,complete job

Lighting point with PVC copper wire 1/1.5 Sqmm of Havel or Imperial make incluiding conduits , channels ,bends ,5Amp switches . Helium plates and (10-25Amp MCB) with 20 watt LED Surface Light of approved brand

Heating point with PVC copper wire 4.0 Sqmm Havel or Imperial make incluiding conduits , channels ,bends 15Amp -SScombine and (20-25Amp MCB)

Ceiling fans of approved quality and make, including fan dimmer (10-16Amp MCB)

Exhaust point with PVC copper wire 1/1.5 Sqmm of Havel or Imperial make incluiding conduits , channels ,bends ,5Amp switches . Helium plates and (10-25Amp MCB) with 9" exhaust Fan

MCB 63Amp D.P of Havel make

Automatic change over (ACCL) 63Amp Havel make

On load Change over switch 63Amp- 4Pole

MCB box 16 way

P / F 1.5Ton 5 star convertible 5 in 1 cooling inverter split AC (Copper, 4 way swing, dust filter,smart ready, self diagonsis) with automatic stablizer 170V to 270v of approved quality/brand

P/F 450mm x 300mm x 30mm polished stainless steel pull handle back to back (H-Shaped) for doors tighten the nut, push and pull smoothly, not easy to oxidize, long service life, anti coorosion and anti rust of approved Quality

P/F Ozone OPL-1 Steel Corner Patch Lock with Strike Plate (Silver)

P/F Magnetic Door Stopper for Glass Doors floor mounted Stainless steel of approved Quality

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti termite treatment.Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:

Removal of waste by mechanical means and disposal of the same beyond municipal limits

Providing and fixing of signage board made up of Acrylic sheet for the outlet with LED Backlitc Board of approximate size 4'x2' and text and design as approved by Engineer-in-charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing of 12 mm thick toughened glass with powder coated aluminium (U) profile in windows , Clear Silicone including coated film on toughened glass of approved shade and pattern as per engineer-in-charge. all transport, Loading unloading complete job.

Supply and installation of window awnings including aluminium frame, jacks, necessary hardware,fasteners and hardware for flexible to and from movements including acrylic fabric cloth. The sample shall be duly approved by representative of Horticulture Department, along with Engineer in charge.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 125x64x1.90 mm

Ozone OGH-55 25x450 mm H-Type Glass Door Handle - Polished and Satin Stainless Steel Finish

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg or 1 bag of cement)

Carriage of sand by mechanical transport incl. loading, unloading etc. (Av. Lead 59 kms)

Carriage of Gravel by mechanical transport incl. loading, unloading etc (Av. Lead 59 kms)

Carriage of Bricks (Av. Lead 80 kms)