Public Works Department Tender

Providing & fixing in position Veneer paneling as per detail for back wall of reception. Base shall be with 18 mm HDHMR Board screwed through lugs on wall with lipping of 4 mm thk. Veneer on outer exposed surfaces. The job shall include paneling on plain wall feature, boxing complete as per site. basic cost of veneer shall be Rs120 per sft. Polishing shall be paid separately. Niche shall kept at centre of size 3 feet x 2 feet for placing guest house signage. signage shall be paid separtely.basic cost of veneer shall be Rs120 per sft. Polishing shall be paid separately.

Fabrication , Supply and fixing of signage board made of black acrylic base sheet 6 mm thick size 48"X 30" (aprox size as per requirement at site), inclusive of labour charges, carriage, necessary harware consisting of fixing of alphabets and National Emblem 12mm 3D Brass Laser Cut With Matte/ glossy Finish Lacquered Writing.complete job.

Modifications and repairs to existing window along with teak wood required. the shall include polishing also as per the new design to match the aesthetics.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. shall not be paid separately and is part of this item).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Dismantling of existing reception and disposal of all the scrap and material from the site.

Cleaning and disposal of malba and waste from site.

Buyback of metalic scarap genereated out of dismantling the reception

Providing and fixing of Wooden partition in main lobby for sagregation, The partition shall be made of teak wood with decorative cuttings. The partition shall be carved out of battens 50mmX 50 mm. The centre to centre distance between battens have be maintained upto not more than 75 mm. . As per directions of Engineer in Charge. polishing shall be paid separately

Supply and Fixing of new curtains with premium quality fabric/ cloth of Curtains of approved design and make including stitching, lining, wastage inclu stitching of tie belts , eyelet curtain rings complete job upto final finishing level.Basic cost of fabric = Rs. 1500/ mtr.basic cost of lining = Rs.300/ mt

Supply and fixing of Stainless steel curtain rods in SS 304 with decorative end caps along with accesories labour and hardware complete job.

Supply and fixing of Examnination bed along with suitable mattress upholostered with leatherite.(payment shall be made as per the plan area)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing sofa made up of hardwood frame with the base of seat and backrest equipped with metal z springs , seat back rest and arm rests padded with polyurethane foam (40 density) and upholstered with fabric of approved shade ( basic cost of fabric min Rs800/mtr) as per approved design.

double seater

Supplying and placing in position of revolving chair made up of stainless steel, seats, arm rest and back cladded with leatherite alonwith underneath foam padding Size :- (W)560mm X (D)660mm X (H)1000mm, max seat height- 520mm, mini seat height- 425mm, back height- 480mm, seat depth- 450mm ( Standard Chair)

Repair of chairs by way of removing existing damaged upholstry and replace it with new one of approved fabric and design , including back ply, foam, nails, fevicol and seating ply including carpenter.and polishing/painting of the chair complete in all respects.

Supplying and placing in position of Visitor chair made up of stainless steel, seats, arm rest and back cladded with leatherite alonwith underneath foam padding Size :- (W)595mm X (D)510mm X (H)875mm, seat height- 515mm, back width - 455mm, back height- 440mm, seat depth-510mm ( Standard Chair)VISITOR CHAIR

Providing, errection and fixing in position cabinet/ Cupboards/ racks upto 600 mm deep and 900 mm to 2100 mm in height made up of 18 mm thick HDHMR board for all horizontal and vertical members with sides and all inside surfaces lipped with sunmica and exposed surface finished with Laminate of superior grade including all hardware fittings like locks, job without shutters , basic rate of HDHMR board = Rs. 1600 per sqm and laminate Rs. 400 per sqm.

Providing, errection and fixing in position cabinet/ Cupborads/ Consoles upto 600 mm deep and 900 mm to 2100 mm in height made up of 18 mm thick HDHMR board for all horizontal and vertical members with side drawers running on channels all inside surfaces lipped with sunmica and exposed surface finished with Laminate of superior grade including all hardware fittings like locks, channels, hinges, handles complete job with shutters, basic rate of HDHMR board = Rs. 1600 per sqm and laminate Rs. 400 per sqm.

Fabrication, supply and installation panelled wooden view cutter of size 7.5'x6.0', made of teak wood in antique design along with PU polishing complete. The design and shape shall be approved by Engineer - In charge before supply.

Providing, errection and fixing in position cabinet/ Cupboards/ racks upto 600 mm deep and 900 mm to 2100 mm in height made up of 18 mm thick HDHMR board for all horizontal and vertical members with sides and all inside surfaces lipped with sunmica and exposed surface finished with Laminate of superior grade including all hardware fittings like locks, channels, hinges, handles complete job without shutters , basic rate of HDHMR board = Rs. 1500 per sqm and laminate Rs. 400 per sqm. The top shall be lipped with Granite 18 mm thick with moulded and polished edge.

Supply and Installation ofcuttlery wall hanging rack of stainless steel, sixe 2'X 3' in existing kitchen.

Upgradation/ Repair of sofa Chairs in Bnew block guest rooms by way of removing the existing Upholostrey, foam, rubber sheets, cushion etc and providing new Upholstrey with new fabrics, piping, lace, bastionb nails complete job. ( Basic cost of fabric = Rs.800/mtr)

Supply and laying at site/beds/ pots at various locations within the premises of Chankyapuri Guest house inside and out as per the directions of Manager, Engineer in charrge and horticulture incharge .

Round fancy bowl pots with flowers as apporved by enginer in charge 12 " dia ceramic

Rectangular planter box ( Fibre glass)approx 24'' by 10''of approved colour and design

Cycus palm

Drychina Song of India

drychina green

Sheflara Verigate

canna Palm 12"

Roughs Palm 10"

Arica Palm 10"

Sheflara Green 3ft

Snake palm 10"

Mixture of Manure/cocopet/good earth

Chlorophytum

Cucarpus 4ft

Enarmi

Round 24" roto pot

Hanging Basket

Plants for basket

Supply and laying of carpet ( wall to wall) in room (37.5 ftX 13.25 ft)complete including pasting, wastage Basic cost= 250/ sft

Supply and laying of circular pillows/ cushions size 3ft long and 1 feet dia. the pillows shall be supplied along with copver of approved shade andf fabric.

Design of Recepetion area by enganging Architect/ Consultant.

Demolition of existimg partitions in the offices of basement (2 no.) along with repair to edge of cutting, with gypsum bord , PVC beadings along with matching paint to compensate the aesthetics.

Upgradation/ Repair of sofa Chairs ( wrought iron) in C block guest rooms by way of removing the existing Upholostrey, foam, rubber sheets, cushion etc and providing new Upholstrey with new fabrics, piping, lace, bastionb nails complete job. ( Basic cost of fabric = Rs.800/mtr), alongwith placing of rubber shoes and duco paint of MS frame of chair, the hardware screws/ nuts and bolts shall be replacing and removing the existing paint and doing new duco paint. complete job.

Upgradation/ Repair of beds ( wrought iron) in C block guest rooms by way of removing the existing existing paint and relpacing with new duco paintcomplete job. Alongwith placing of rubber shoes, new decorative tops of vertical members and duco paint of MS frame of bed, the hardware screws/ nuts and bolts shall be part of this item.

Upgradation/ Repair of side tables( wrought iron) in C block guest rooms by way of removing the existing existing paint and replacing with new duco paintcomplete job. Alongwith placing of rubber shoes, new decorative tops of vertical members and duco paint of MS frame of bed, the hardware screws/ nuts and bolts shall be part of this item.

20 rooms , 2 in each room

Upgradation/ Repair of Centre table( wrought iron) in C block guest rooms by way of removing the existing existing paint and relpacing with new duco paintcomplete job. Alongwith placing of rubber shoes, new decorative tops of vertical members and duco paint of MS frame of bed, the hardware screws/ nuts and bolts shall be part of this item.

Replacemnt of broken glasses for side tables by toughened glass 10 mm thick with moulded and polished edges.

Replcaemnt of broken glasses for centre tables by toughened glass 10 mm thick with moulded and polished edges.

Replacemnet of TV Console box with new one made of Wooden frame of HDMR Baord 18 mm thick, lined with laminate of 1.0 mm thick of approved colour and shade. size 3 feet X 0.75 feet.