Public Works Department Tender

2.03) 3 x 4 sq. Mm

2.04) 6 x 4 sq. Mm

2.05) 3 x 6 sq. Mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required 3.01) 20 mm

3.02) 25 mm

Supplying Installation Testing & Commissioning of of 12-15 Watt of New generation COB LED technology, equipped with an innovative and adjustable optics that focus light on the desired areas. Because of its great colour and light quality, it adds value to the products or merchandise by enhancing their aesthetic appeal. Scientifically designed aluminium heat sink for better thermal management. Premium design that seamlessly merges with ceiling. COB LED technology for long LED life. Robust driver with wide voltage range and in-built protection. Operating Voltage Range: 140 - 280V PF: 0.95, THD: 10%, CCT: 4000K/6000K CRI: 80+, IP: 20, LED Make: Seoul / Bridgelux / Osram / Cree / Edison / Lumileds LED Burning hours: 50000hrs @L70, Operating temperature: -10 to +50⁰C, Surge protection: 2.5kV, System Lumen Output: 1200lm Electrical Protection: Over voltage, Short circuit, Open circuit including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of Clutch wire and sleeve etc. i/c making connections, testing, commissioning etc. complete as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 5.01) 8 way (4 + 24), Double door

Supplying and fixing of 5 Ampers to 32 Ampers rating, 240/415 Volts, 10 kA, breaking capacity “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6.01) Single pole

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 7.01) 6 Module (200mmX75mm)

7.02) 3 Module (100mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 8.01) 15/16 A switch

8.02) 6 pin 15/16 A socket outlet

Supplying and laying of shieled CAT 6, UTP cable along with compatible connectors in the existing surface / recessed steel / PVC as required. (a) 1 run of cable

Supplying and fixing of PVC cable management system / wall trunking with cover of following sizes including internal, external , flat single cover and T- cover , end cap and other accessories on the wall so as to make complete as required. a)105 mmx50mm

b)80mmx50mm

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 11.01) 225 mm width X 50 mm depth X 1.6 mm thickness

Supplying and Laying of It shall be a Ultra high- performance CAT6 shielded twisted-pair cable.,24 AWG x8 solid copper conductor. Mutual Capacitance : 17.1 pF / ft or better Propagation Delay Skew : 45nS / 100 m or better, DC Resistance : 28.6 Ohms / 1000 ft maximum or better, Capacitance Unbalance : 330 pF / 100 m or better.

Supply, installation, testing & commissioning of following capacity energy saving IP-66 LED flood light fitting of following rating madeout of aluminum housing with lumen efficiacy 125 lumen per watt, CRI 70%, with potted driver of surge 4KV internal and 10KV external, THD less than 10%, with lense, minimum burning hours of 50,000 Hours, with LM-70/79/80 reports, fixed on angle iron frame suitable to work 230 volt AC supply complete with connection etc. with 1.5 sq.mm PVC insulated copper conductor wire as required at site. a) 150 Watt

b) 200 Watt

Supplying, installation, testing and commissioning of Distribution Panel of cubical type compartmentalized of size 1875mm x 1100mm x 400 mm deep and fabricated from 2 mm thick CRCA sheet having necessary cable alleys, powder coated, 9 tank processed for prickling, degreasing including connection and interconnection as required as per specifications complete with following accessories . Suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC, having 300 Amps capacity extensible type TPN Aluminum Alloy bus bars of high conductivity DMC/SMC bus bar supports, bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switchgears etc. as per site requirement. i/c credit of old dismentalled panel etc as reqd. INCOMING -250A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Extended Rotary Handle for DN2 MCCB Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB 250/5A 15VA Acc. Cl: 1 Ring Type Current Transformer-3 No Ammeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Voltmeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC 6A 1P 10kA, C-Curve MCB-3 No OUTGOING 200A 3P 36kA MCCB TM-1 No Release, Type: DN2-250D, 415V AC, 50Hz Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB Extended Rotary Handle for DN2 MCCB OUTGOING 160A 3P 25kA MCCB -2 No TM Release, Type: DN1-250C, 415V AC, 50Hz Extended Rotary Handle for DN1 MCCB-2 Nos Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB-2No.

Supply, installation, testing and commissioning of Lighting Distribution Panel of cubical type compartmentalized of size 1875mm x 1100mm x 400 deep and fabricated from 2 mm thick CRCA sheet having necessary cable alleys, powder coated, 9 tank processed for prickling, degreasing including connection and interconnection as required as per specifications complete with following accessories . Suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC, having 100 Amps capacity extensible type TPN Aluminum Alloy bus bars of high conductivity DMC/SMC bus bar supports, bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switchgears etc. as per site requirement. i/c credit of old dismentalled panel etc as reqd. INCOMING-250A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Extended Rotary Handle for DN2 MCCB Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB 250/5A 15VA Acc. Cl: 1 Ring Type Current Transformer-3 Nos Ammeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Voltmeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC 6A 1P 10kA, C-Curve MCB-3Nos OUTGOING 200A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB Extended Rotary Handle for DN2 MCCB OUTGOING 160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz-3 Nos Extended Rotary Handle for DN1 MCCB-3 Nos Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB-3 Nos

Supply, Installation, Testing & commissioning of Video System of Min. 163’’ or More diagonal in 16:9 Aspect Ratio Minimum Total Resolution of Screen- 1920 x 1080 Full HD or more, Design- Modular Design with 16:9 Aspect ratio, Pixel pitch-1.88 or less, Pixel configuration-SMD 3 in 1 LED Package or Better, Brightness (Typ)- 500 nit or better with Auto Brightness Feature, Brightness Uniformity-98% or more, Contrast ratio (Typ)- 3000 : 1 or More, Color processing depth- Min. 16 bit (HDR10, HDR 10 Pro or More, Viewing angle-160° & 160° more (Horizontal & Vertical), Depth of LED Screen-46 mm or less, LED Controller- Original OEM LED Controller of Same OEM embedded inside LED, Inbuilt Connectivity Ports in Screen- 3 x HDMI, 1X DP, 1 x USB, Control Port, Audio out, LED life span- 1,00,000 hrs , Input Voltage & Power Requirement- 230V, 50Hz, Single power Cable Connectivity, Standby Mode for Power Saving Easy Operation- Remote Control and Buttons on Screen for Easy Control & operation, Built-in Operating System - Windows/WebOS,Unit case material- Aluminum, Additional feature- No Interconnectivity cables & fans behind the Panels, Operating Condition- 90%RH(without condensation), Speaker- Built in Speaker inside LED screen ( 9W +9W), Wall mount kit- Original OEM Wall Mount Kit, Dust Protection from Front/Back- IP30/IP20, Required Features- HDMI CEC, Picture in Picture, Piture by Picture(two different external input sources), Inbuilt Operating System, Processor and 4 GB Memeory, Inbuilt Digital Signage Features for Information with Certin Security certification, Smart Remote - Smart IR Remote should select and run the menu of the picture with using a mouse and its cursor remote should be used as a laser pointer, Service- Direct Warranty from OEM for minimum 1 Years, OEM Should have Direct Service Center in the State, Wireless Presentation Connectivity- Inbuilt screen Sharing Provision, Working on IEEE 802.11 a/b/g/n/ac wireless protocol, Should be able to adjust the default setting values of Display(volume, picture mode, auto bright, etc.) from the PC application of wireless dongle,Red/Green/Amber color LED light on wireless dongle to show status of screen mirroring, Inbuilt Provision of Connecting four/4 Wireless Dongles of Same Brand as LED screen for Wireless Connectivity Laptops and Quad View on Screen, Option of Connecting Mulitple Screens together with inbuilt Tile mode/ Video Mode for future expansion i/c all electrical related accessories complete etc as reqd. (Warranty from OEM Ends 01 years), Power Consumption for Screen- Average 880 watt or less.