Public Works Department Tender

5 x 4 sq.mm

Supplying and placing of set of stainless steel hosting rope of 6mm (Nominal) dia. in the existing 30mtr. High Mast.

Servicing & Repairing of existing winch assembly of 30 mtr. height high mast i/c removing, greesing, oiling & refixing with all accessories for smooth functioning of high mast complete as reqd.

750 KG Capacity Double Drum Gear Winch Heavy Duty)

S/F of Lantern carriage with 8/12 nos. arms secured tightly with suitable arrangement for fixing of 8/12 Nos. luminaires & other accessories complete etc. as required - 1 Job.

Supplying/Laying/Fixing of one number PVC insulated and PVC sheathed/XLPE Al. UG Armoured Conductor power cable of 1.1 KV grade of following sizes in the existing RCC/HUME/METAL pipe/Duct/Surface of Flyover as per instructions of The Engineer-in-Charge as reqd.

4 x 25 sq.mm

Supplying and drawing following sizes of XLPE Insulated and PVC Round Sheathed Multi Core Flexible Aluminium Conductor Heavy Duty Industrial Cables for Voltage Grade 1100 Volts as per IS: 694:1990.

2 x 2.50 sq.mm

Supplying, installation, testing & commissioning of LED street light fixture with IP 66 made out of pressure aluminium die cast housing capable of delivering following nominal system lumens output with a minimum system efficacy more than 130 lumens /watt and a CRI greater than 70 . The luminaire shall have a life class of 50000 hours. The inbuilt electronic driver shall operate at power factor .95 of CCT 5700K. LM 79/80 certification to be provided by the manufacturer for LED luminaire and suitable for Pole Mounting bracket arm min. 50mm dia.complete etc . as reqd. i/c dismantling (if any) of existing fittings. Not Less than 23400 lumens

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Fabrication, Supplying and installation of outdoor type cubical feeder pillar of suitable size not less than 300mm deep made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalised having 4 strip busbars of 100amp capacity double door with two nos. godown locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 50 mm X 50 mm X 6 mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand :4 stone aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminum thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. Supplying & Fixing of following accessorries in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. a) 100 Amp. 16 KA MCCB - 3 pole- 1 No. b) 63 Amp. 1 6 KA MCCB 3 pole- 4 Nos. (With 100 Amp. frame size) c) Voltmeter 0-500 volt 96 sqmm flush type with selector switch. d) Ammeter 0-100 Amp 96 sqmm flush type with selector switch & 100/5 Amp ratio CTs. e) LED type indicating lamp RYB Phase-- 3 Nos. f) Power contactor 3 pole , 40 A, 415 volt (MNX-40/similar make). g) Astro timer- 01 No. h) Danger notic plate.