Public Works Department Tender

Supplying visitor Chair Overall Size 660W x 660D x 1210H . Seat Plywood Made Of 15mm Hot Pressed Supported and Back made of 25x10 rectunglor pipe with 16 guage . Upholstery Structure Moulded With Prime Quality Leatherite . Understructure Base Of Chair Metal Structure Fixed Type. 910 . 490W x 510D Base Seat 75mm Thick With HD Foam , D -40 kg/m3 & 460W x 560H Back in made of 25x10 rectangular pipe and 25 mm thik HD foam pasted on frame . 490 Handle In /560 Handle In Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 180mm . Arm Rest PU Moulded fix on 40X10 with 16 guage rectungler pipe . Height From Seat To Ground 450mm . chair base frame made of 25mm round pipe with 16 guage chrome coating.

Providing and placing Visitor chair made of good quality products of standard models. Overall size 560w x 580d x 820h. Seat & back plywood made of 12mm hot pressed supported. Understructure base of chair metal structure fixed type. Seat & back are firmly connected to the base frame metal structure. Chair max height 820mm. Upholstery, PHA & machanism NA. 480w x 450d base seat 60mm thick moulded with hd foam , d - 45 kg/m3, h - 20 & 510w x 460h back seat 60mm thick moulded with HD foam , d - 45 kg/m3 , h - 20 . arm rest fitted to the seat with armrest connecting back. Cushioned is joint on arms top. Height from seat to ground 460mm. Understructure base fixed type 40 x 20 mm metal pipe 1.6mm thick chrome finished.

Providing and Placing Multiseater 3 seater of size 1675x710x775mm (wxdxh) having base made of die cast metal duly powder coated with levelers to adjust to floor level. The seats are made of perforated MS sheet duly counter bend to shape and powder coated of 40-50 micron. Legs & arms are chrome finish.

Providing and Placing designer three seater sofa fully upholstered. Frame made of good quality wood duly anti-termite treated, Seat made of good quality flat steel spring used in seat frame duly covered with coir, jute cloth and markeen fixed with 4” thick ISI mark high density ‘U’ foam. Back rest covered with coir, jute cloth and markeen fixed with ISI mark high density ‘U’ foam for giving shape. It is having wooden arm rest made of good quality wood duly polished in desire shade.

Providing and Placing designer single seater sofa fully upholstered. Frame made of good quality wood duly anti-termite treated, Seat made of good quality flat steel spring used in seat frame duly covered with coir, jute cloth and markeen fixed with 4” thick ISI mark high density ‘U’ foam. Back rest covered with coir, jute cloth and markeen fixed with ISI mark high density ‘U’ foam for giving shape. It is having wooden arm rest made of good quality wood duly polished in desire shade.

Providing and Placing Wooden Centre table of size- 900x600 x450mm (wxdxh). Frame made of good quality teak wood duly polished. Top made of 10mm thick clear glass with bevelled edges fit in wooden frame. Shelf provided at the bottom made of 19mm thick commercial board duly polished with melamine finish.

Providing and Fixing Overhead Storage of size- 900x350x750mm (wxdxh). Body made of 20 gauge (CRCA steel) cold rolled close annealed, as said before that metal is rolled in temperature below recrystallization level, cold rolled are much harder and have smootherfinish than hot rolled metal & Door made of 18mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Base made of 18mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is having 1 shelf making 2 compartments.

Providing & Placing modular workstation of size 1350x750x750mm (wxdxh). Worktop made of 25mm thick prelaminated particle board duly edge banding & 0.5 mm thick backing laminate at the bottom with flat edges duly sealed. All exposed edge of particle board shall be sealed with 2mm thick PVC edge banded tape pressed/ pasted at 200'C with hot melt glue, complete including all necessary fittings & fixtures. Partition panel laminated /upholested of 72 mm thick & 1200mm. heightt, snap on panel made of 12 mm prelaminated particle board duly edgebanded with raceway running at 2 levels one at skirting & one above or below the worktop.Basic structure is composed of rolled steel vertical and horizontal members 38x38mm in 18 guage duly powder coated upto 40-50 microns to make the basic framework of partition.Structure can be configured into any shape in 90 degree angle. All steel components are duly powder coated. KeyBoard tray of size 600x400mm (wxd) made in 18mm thick prelaminated particle board duly edge banded. CPU Trolley made of CRCA in 22 guage duly powder coated up to 40-50 microns with lockable nylon wheel castors. Mobile three drawer unit made of complete 18 mm prelaminated particle duly edge banded with necessary hardware fittings. Three drawer (2 single & 1 filling drawer) .It shall have a single multi drawer lock .The top two drawers shall have movement on nylon rollar channel and bottom drawer on telescopic channel.

Providing and Placing medium height storage unit of size 900x450x1200mm (wxdxh) having top & shelves made of 25mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Base made of 18mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is having 3 shelves making 4 compartments.

Providing and Placing medium height storage rack of size 900x450x1200mm (wxdxh) having top & shelves made of 25mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Base made of 18mm thick prelaminated particle board duly edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is having 3 shelves making 4 compartments.

Providing and placing reloving medium back chair. The mesh back has a central console that provides excellent lower back support for improved ergonomics. The seat cushion is upholstered in soft black fabric rests firmly on a nylon base powered by castors. The front facia of the chair is full of poise with its sturdy arms and detached back. Overall Dimension (W)550mm X (D)450mm X (H)945mm, Back Type: Low Back, Base:Nylon Base. Base Type:Revolving, Maximum Seating Height:20.47", Minimum Seat Height: 16.73", Function:Revolving. Pneumatic Height Lift: Tilt Tension Control::Push [Back, Locking Mechanism:Push Back. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm th hot pressed plywood upholstered with PVC with polvurethane foam, chair seat has foam of density 30-35 kg/m3.

Providing and Placing Executive Table of overall size size 1650x1950x750mm (wxdxh). Main table of size- 1650x750x750mm (wxdxh) with side unit of size 1200x450x750mm (wxdxh). Table top made in combination of 25mm thick and base in 19mm thick commercial board with commercial ply duly post lamination of desire and approved shade. Teak moulding/margen provided at the exposed edges duly polished matching to the laminate. Table provision of three drawers on one side with necessary hardware fittings having same combination of material as used for top. Side unit top made in combination of 25mm thick and base in 19mm thick commercial board with commercial ply duly post lamination of desire and approved shade. Teak moulding/ margen provided at the exposed edges duly polished matching to the laminate. Modesty panel made of 12mm thick commercial ply board duly post lamination of desire and approved shade. It is having Keyboard tray & three drawers unit in side unit.

Providing & placing high back revolving chair overall size 730W x 730D x 1220H. Seat plywood made of 12mm hot pressed. Upholstery PVC structure moulded with prime quality leatherite. Seat & back are firmly connected to the base frame machanism. Machanism provided upright position locking & synchro knee tilt. Tilt adjustment can be operated in seating position. Chair max height 1220. 500W x 450D base seat 80mm thick moulded with PU foam (H.D ) D - 45kg/m3 , H - 20 & 480W x 650H back seat 65mm thick moulded with PU Foam ( H.D ) D - 45kg/m3 , H - 21. Moveblity of seat 80mm . 530 handle in / 655 handle out arm rest adjustable type PU + L BKT ( Chrome Plated Steel ). Arm rest height from seat 230 minimum & 310 maximum. 188L x 123W x 3mm thick spine Bkt . (Part - A) U type mild steel black painted & 100L x 90W x 6mm thick spine Bkt. (Part - B) flat type mild steel black painted. Height from seat to ground 490mm. Understructure used base chrome plated steel frame. Casters made of moulded black nylon metal bolt inserted & fitted with 5 Nos . twin wheel casters 50mm dia. Pedestral pitch centre dia 670mm without casters & with casters 730mm.

Providing and Placing executive table of size 900x600x750mm (wxdxh). Top made of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Table without drawer. Base and modesty made in 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius.

Providing and fixing manually operated Roller Blinds of vista (Vista screen classic 5% with head rail) non back out series, Aerolox vista, marvle docor or mac make as per manufacture specification in required colour or shades with other connect accessories for fixing and smooth functioning of the blinds as per direction of Engineer-in-charge). Control Unit:- The control unit is made of high strength reinforced plastic. The clutch is of warp spring. High carbon steel springs are provided to transmit motion from driving to driven member of clutch mechanism Cluth is operated directionally by the use of endless beaded chain. clutch never need any adjustment. Idler :- Idler is of high strength reinforces plastic, consisting of a center shaft. The idler is mounted on the bracket by using a plastic. Roller Tube:- It is a 32 mm (OD) (depending upon the size) aluminium extruded grooved tube made of alloy T6063 weighing 0.27 Kg/m control unit and idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail:- It is an aluminium extruded rail with groove for fixing the fabric and powder coated in white. It is fixed to the bottom of the fabric in tension and straight. The end caps of the tube are ABS. The Size of rail shall be 21 mm (OD) made of alloy HE 9 WP weighing 0.27 kg/m