Public Works Department Tender

(c) 200 A, 25 kA,TPMCCB

(d) 250 A, 25 kA,TPMCCB

(e) Digital type Volt Meter (0-500 Volts) with selector switch

(f) Digital type Ammeter (0-250 ampers) with selector switch

(g) Indicating Light LED type with 2A Ampers SP MCB (3 Nos.)

(h) Digital Time Switch

(i) 400/5 Amp. CT (3 Nos.)

j) Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required

Supplying, installation, testing and commissioning of Distribution Panel of cubical type compartmentalized of size 1875mm x 1100mm x 400 mm deep and fabricated from 2 mm thick CRCA sheet having necessary cable alleys, powder coated, 9 tank processed for prickling, degreasing including connection and interconnection as required as per specifications complete with following accessories . Suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC, having 300 Amps capacity extensible type TPN Aluminum Alloy bus bars of high conductivity DMC/SMC bus bar supports, bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switchgears etc. as per site requirement. INCOMING -250A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Extended Rotary Handle for DN2 MCCB Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB 250/5A 15VA Acc. Cl: 1 Ring Type Current Transformer-3 No Ammeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Voltmeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC 6A 1P 10kA, C-Curve MCB-3 No OUTGOING 200A 3P 36kA MCCB TM-1 No Release, Type: DN2-250D, 415V AC, 50Hz Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB Extended Rotary Handle for DN2 MCCB OUTGOING 160A 3P 25kA MCCB -2 No TM Release, Type: DN1-250C, 415V AC, 50Hz Extended Rotary Handle for DN1 MCCB-2 Nos Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB-2No.

Supply, installation, testing and commissioning of Lighting Distribution Panel of cubical type compartmentalized of size 1875mm x 1100mm x 400 deep and fabricated from 2 mm thick CRCA sheet having necessary cable alleys, powder coated, 9 tank processed for prickling, degreasing including connection and interconnection as required as per specifications complete with following accessories . Suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC, having 100 Amps capacity extensible type TPN Aluminum Alloy bus bars of high conductivity DMC/SMC bus bar supports, bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switchgears etc. as per site requirement. INCOMING-250A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Extended Rotary Handle for DN2 MCCB Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB 250/5A 15VA Acc. Cl: 1 Ring Type Current Transformer-3 Nos Ammeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Voltmeter with Inbuilt selector switch, 3Ph, Acc. CL: 1, Aux Supply: 80-300V AC, Size: 96X96 Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC 6A 1P 10kA, C-Curve MCB-3Nos OUTGOING 200A 3P 36kA MCCB TM Release, Type: DN2-250D, 415V AC, 50Hz Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB Extended Rotary Handle for DN2 MCCB OUTGOING 160A 3P 25kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz-3 Nos Extended Rotary Handle for DN1 MCCB-3 Nos Spreader Terminals - 3 Pole (Set of 6) for DN1, DN2-250 MCCB-3 Nos

Supply, installation, testing and commissioning of Distribution Panel of cubical type compartmentalized of size 1775mm x 1100mm x 400 mm deep and fabricated from 2 mm thick CRCA sheet having necessary cable alleys, powder coated, 7 tank processed for prickling, degreasing including connection and interconnection as required as per specifications complete with following accessories . Suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC, having 300 Amps capacity extensible type TPN Aluminum Alloy bus bars of high conductivity DMC/SMC bus bar supports, bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switchgears etc. as per site requirement. I) Incoming a) 250A TP+N MCCB 50kA Thermal Magetic release with ajustable setting for overload and short circuit Protection & Spreader + extended rotary handle - 1 No. b)3 Phase Digital Ammeter with inbuilt selector switch, Cl-1.0 - 1 Nos. c)3 Phase Digital Volt Meter with inbuilt selector switch, Cl-1.0 - 1 Nos. d)Resin Cast C.T's 400/5A, CL-1.0 15VA -3 Nos. e) C.T Shorting Link- - 4 Nos. f) R,Y,B Phase Indicating LED (230VAC)-1 Set g) 32A Neutral Link -2 Nos. h) 6A SP MCB 10KA -3 Nos II) Busbar TPN aluminum bus bars of minimum of 300 A capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete, for cross section, size supports & their spacing etc. III) Outgoing a) 125A TP+N MCCB 16kA Thermal Magetic release with ajustable setting for overload and short circuit Protection & Spreader + extended rotary handle - 2 Nos. b) 100A TP+N MCCB 16kA Thermal Magetic release with ajustable setting for overload and short circuit Protection & Spreader + extended rotary handle - 2 Nos. Distribution Panel as described above