Public Works Department Tender

3 x 1.5 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying, installation, testing and commissioning of pre-wired, aluminium extruded LED batten wall mounted luminaire having 120 Lumen per watt, CCT 5700K to 6500K, power factor 0.90, CRI 70% (including dismantling the old fitting if any where ever required) complete with all accessories etc. directly on ceiling/wall including connections with 1.5 Sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

LED batten tube light fitting having extruded Al. Heat sink with electronic driver. Minimum lumen not less than 2400

Supplying, Installation, Testing and Commissioning of 300 mm Sweep fresh air metal body exhaust fan minimum 1300rpm including louvers and shutter, fixing with suitable arrangement, connection with 1.5 sq.mm. FRLS PVC insulated wire complete etc. as reqd.

SH-II :- Supplying, Installation, Testing & Commissioning of New 500 LPH RO Plant & Water Cooler at Sarvodaya Vidyalaya, Mansarover Garden Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.

SITC of Reverse Osmosis Plant of 500 LPH capacity/ 400 LPH Average Flow Rate i/c all plumbing with suitable UPVC pipes of all sizes required in this system, fittings, fixtures, unions, joints, flow meters for waste and clean water, pressure switch (Low & High), pressure gauges, motor pump sets, media, PLC controller, SS skid to make the system complete in all respect, making foundation, grouting i/c supplying & fixing the following on the foundation and skid, complete etc as required. a) Mono block raw water motor pump set operating on single phase approx/ 25 LPS, 3 meters head of suitable HP- 1 no. b) Self standing dual media filter 13" x 54"(Minimum Flow Rate 2000 LPH) with all accessories filled with gravels, pebbles, coarse sand to appropriate lev el - I no. c) Activated carbon vessel of size 13" x 54" (Minimum Flow Rate 2000 LPH) with all accessories, filled with activated carbon of 900 iodine grade upto appropriate level etc. - I no. d) Anti-scaling dosing complete system (with pump 10 LTR Chemical and 100 liters tank) with all mounting, fitting etc. - 1 no. e) Micro filter cartage for restraining particles size greater than 5 micron of size 20" enclosed in big blue housing with cap and all mounting etc as reqd. - I No. f) Vertical multistage high pressure body centrifugal pump suitable to operate on 220 volt at a discharge pressure not less than 13 Kg per sq.cm(System Pressure) complete with all accessories and mounting arrangements etc. - I no. g) Spiral type RO membrane TFC type of size not less than 4" dia, 40" long complete provided in dual membrane housing with end caps & accessories & mounting complete etc. - 2 nos. h) Pressure guages (0-25) Kg. per sq,min. I) Auto Flushing system including 0.5 inch solenoid valve, operating on 220 Volt through PLC panel command- 1 set, j) Rota Meter - 2 nos. k) Programmable logical control panel for the automation of the system complete with:- I) LCD display for measuring TDS and conductivity 1 no. ii) Single phase DOL starters with overload relay- 2 nos. iii) Online indicating lights for motor, raw water level indicator LPS, HPS & clean water status etc. iv) Auto manual Switch. v) Auto Flush system RO membrane at each start. vi) Input MCB 20/32 Amp. - 2 Nos. vii) Indication Lights - 6 Nos. viii) PLC module with all accessories etc - 1 No.

SITC of ISI marked Self Contained Stainless Steel Drinking Water Cooler with reciprocating compressor (R-22 Refrigerant), cooling capacity litres/hour: 150 Type : Storage, Storage capacity Litres : 150 Faucets - 2 Nos., Material - Stainless Steel, Specially designed Lavel Sensor - 1 No. SS 304 Base Stand of height of 6inch of suitable Size (as per machine Dimension) including inlet water connection with suitable length pipe etc as required at site.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.

25 mm dia

32 mm dia

SH-III:- Repair of Borewell Pump West Patel Nagar, SKV Supply and Replacement of 5 HP multistage Submersible Borewell pump capable of delivering 70-150 lpm discharge at 154-88 m head suitable for operation on 415+10%V, 50+5%Hz, AC Supply etc as required.

Providing and fixing of 3x6 sqmm Cu conductor submersible flat cable in existing bore with existing submersible pump etc. as required.

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

40 mm

Replacement of Wall mounted three phase DOL 440V, 50Hz company made starter panel board, SPP,MU-G6 Motor Starter suitable for 5hp pump complete with all accessories overload relays, contactor, Ampere meter, Voltmeter i/c connection etc. as reqd.

Supplying and fixing 40mm Gun metal gate valve Vertical & Serewed type with accessories in the existing line etc. as reqd.

Providing, installation, testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

40mm dia

Supplying and fixing 8 mm dia. Stainless Steel wire rope for holding submersible pump set etc. as reqd

Supplying, laying & fixing of following size XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade in RCC/DWC Pipe/Open Channel etc as required.

4 x 16 sq.mm