Public Works Department Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Public Works Department - PWD Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date19 Jan 2024
Closing Date25 Jan 2024
Tender Amount₹ 81,25,631
Costs
EMD
₹ 1,62,513Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_252369_1Bid Award Id
ViewTender No
133/2023-24/EMD M-351/EE(E)Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://www.pwddelhi.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 No.
-
-
-
b) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 6 Nos.
-
-
-
c) LED Multifunction Meter having V, A, F with required Accessories- 9 Set
-
-
-
d) ON, OFF and Trip Indicating lamps with protection MCBs - 9 Set
-
-
-
e) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
f) Danger notice plate =1 No.
-
-
-
(NOTE:- All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd. Ics =100% Icu for all MCCBs)
1
461571
461571
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.50 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 400 A and all other required accessories - 1 Set.
-
-
-
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 No.
-
-
-
b) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 Nos.
-
-
-
c) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 4 Nos.
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 9 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 9 Set
-
-
-
f) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
g) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
2
978516
489258
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.50 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entery/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
b) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
c) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 No.
-
-
-
b) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 No.
-
-
-
c) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 4 Nos.
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 9 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 9 Set
-
-
-
f) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
g) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
h) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
i) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
504639
504639
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.50 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required , including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 400 A and all other required accessories - 1 Set.
-
-
-
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 No.
-
-
-
b) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 6 Nos.
-
-
-
c) LED Multifunction Meter having V, A, F with required Accessories- 9 Set
-
-
-
d) ON, OFF and Trip Indicating lamps with protection MCBs - 9 Set
-
-
-
e) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
f) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
g) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
h) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
478491
478491
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.50 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required , including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 400 A and all other required accessories - 1 Set.
-
-
-
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 No.
-
-
-
b) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 Nos.
-
-
-
c) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 4 Nos.
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 9 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 9 Set
-
-
-
f) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
g) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
h) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
i) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
506177
506177
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.30 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 250 A and all other required accessories - 1 Set.
-
-
-
b) 250 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 1 No.
-
-
-
b) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 6 Nos.
-
-
-
c) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
d) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
e) LED Multifunction Meter having V, A, F with required Accessories- 7 Set
-
-
-
f) ON, OFF and Trip Indicating lamps with protection MCBs - 7 Set
-
-
-
g) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
h) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
364669
364669
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.50 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required , including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 250 A and all other required accessories - 1 Set.
-
-
-
b) 250 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 No.
-
-
-
b) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 Nos.
-
-
-
c) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
d) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
e) LED Multifunction Meter having V, A, F with required Accessories- 4 Set
-
-
-
f) ON, OFF and Trip Indicating lamps with protection MCBs - 4 Set
-
-
-
g) Fully Automatic Star Delta Starter Suitable up to 10 HP motor complete with Electronic motor protection Relay, Thermal Overload relay, Single Phase protection and other required accessories - 2 Set
-
-
-
h) DOL Starter Suitable up to 7.5 HP motor complete with Electronic motor protection Relay, Thermal Overload relay, Single Phase protection and other required accessories - 4 Set
-
-
-
i) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
j) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
490906
490906
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.30 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entery/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 400 A and all other required accessories - 1 Set.
-
-
-
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 1 No.
-
-
-
b) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 Nos.
-
-
-
c) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 3 Nos.
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 7 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 7 Set
-
-
-
f) 63 A Four Pole 10KA, C Curve MCBs - 6 Set
-
-
-
g) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
h) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
i) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
2
868430
434215
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 2.30 Sqmtr. and 500 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 500 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required
-
-
-
INCOMING:-
-
-
-
a) Manual On Load Changeover Switch 400 A and all other required accessories - 1 Set.
-
-
-
b) 400 Amps, 36KA 4 Pole Microprocessor type MCCB with Ics=100%Icu with Microprocessor based releases for O/L, S/C & E/F protection complete with rotary handle - 1 Set
-
-
-
c) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 250 Amps, 36KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 2 No.
-
-
-
b) 200 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 1 Nos.
-
-
-
c) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 7 Nos.
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 7 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 7 Set
-
-
-
f) 63 A Four Pole 10KA, C Curve MCBs - 6 Set
-
-
-
g) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
h) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
i) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
2
990162
495081
Supplying, installation, testing & commissioning of factory assembled outdoor type hut shaped double door both side openable feeder pillar dust & vermin proof powder coated with degree of protection of IP 54 self supported suitable for 3 phase 4 wire, 415 volt AC supply and having front area not less than 1.30 Sqmtr. and 400 mm deep nominal size fabricated out of 2mm thick CRCA sheet with locking arrangement i/c 3 mm thick sheet in bottom for gland plates, supplying & fixing following accessories as mentioned below i/c 200 AMP Aluminium bus bars inter connection, arrangement for cable entry/support/ termination 2 Nos. earthing stud inter connection with 25mm x 5mmm Copper strip (externally) 50mm x 50mm x 6mm MS angle iron base frame duly welded 100cm long welded with 4 Nos legs for grouting in foundation i/c painting, Pdg. of 1:3:6 (1 Cement : 3 Coarse sand : 6 Aggregate stone 20mm nominal size) foundation (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick etc. complete as required, including dismantling and buyback of existing old damaged panel with connection of cables etc. as required.
-
-
-
INCOMING:-
-
-
-
a) 100 Amps, 25KA 4 Pole Thermal Magnetic Release type MCCB with Ics=100%Icu for O/L, S/C protection complete with rotary handle - 1 Nos.
-
-
-
b) Red, Yellow & blue LED for Phase and LEDs for ON, OFF and Trip Indicating lamps with protection MCBs - 1 Sets
-
-
-
c) LED Multifunction Meter having V, A, F with required Accessories- 1 Set
-
-
-
OUTGOINGS:-
-
-
-
a) 63 A Four Pole 10KA, C Curve MCBs - 4 Set
-
-
-
b) 32 A Double Pole 10KA, C Curve MCBs - 2 Set
-
-
-
c) Fully Automatic Star Delta Starter Suitable up to 10 HP motor complete with Electronic motor protection Relay, Thermal Overload relay, Single Phase protection and other required accessories - 3 Set
-
-
-
d) LED Multifunction Meter having V, A, F with required Accessories- 3 Set
-
-
-
e) ON, OFF and Trip Indicating lamps with protection MCBs - 3 Set
-
-
-
f) 16 A Single Phase socket outlet on the panel body with IP-65 rating and suitable rating double pole protection MCB - 2 Set
-
-
-
g) Danger notice plate =1 No.
-
-
-
(NOTE:- (a) All MCCB's shall be provided with phase barriers, phase spreaders complete as reqd.
-
-
-
(b) Ics =100% Icu for all MCCBs)
1
213998
213998
Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power aluminium conductor armoured cable of 1.1 kV grade of following size On the existing Surface etc as required.. (i) 3.5 x 300
500
1564000
3128
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3½ X 300 sq. mm (70mm)
16
20336
1271
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
24
353136
14714
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
150
8100
54
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
i) 375 mm width X 50 mm depth X 2.0 mm thickness
250
322500
1290
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements