Public Works Department Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 1,96,568Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Comprehensive Maintenance Of Buildings Including Supply Of Materials And Providing Service Of Man Power For Day To Day Maintenance Work Of Utcs Complex Employment Exchange Dsssb Building Working Women Hostel Diet Building And Fire Station Dg 2024 25.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_267602_1Tender No
37/EE/KKD Court Divn./PWD/NIT/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://www.pwddelhi.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
All kinds of soil : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
20
342
6853
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
3
190
572
... More
Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth level:
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5
7665
38329
... More
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
5
6342
31713
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6(1 cement :6 coarse sand)
3
6939
20819
... More
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.
-
-
-
... More
8 mm thick (mirror polished and machine cut edge) : Granite stone of any colour and shade
50
3011
150550
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite stone slab of all colour and texture except black, Cherry/Ruby red : Area of slab upto 0.50 sqm
20
4058
81162
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
60
1233
74023
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
60
2113
126807
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
... More
20 mm dia (heavy type)
50
170
8514
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
20
956
19132
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
40
295
11802
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
250x10 mm
40
112
4482
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
60
64
3868
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
40
70
2816
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge.
-
-
-
... More
Extruded section profile size 48x40 mm
50
262
13145
... More
Providing and fixing to existing door frames.
-
-
-
... More
24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).
30
2889
86672
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
130
26018
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
300
167
50382
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
150
751
112733
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
-
-
-
... More
4.0 mm thick glass panes
30
1035
31077
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Medium shade pigment using 50% white cement 50% Grey cement
80
1292
103398
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
100
1895
189565
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
100
1400
140054
... More
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Double charge vitrified tile polished finish of size : Size of Tile 600 x 600 mm
80
1414
113152
... More
Double charge vitrified tile polished finish of size : Size of Tile 1000 x 1000 mm
100
1753
175305
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
50
2988
149407
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
60
367
22033
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single tee with door : 110x110x110 mm
5
227
1139
... More
Bend 87.5° : 110 mm bend
20
146
2926
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
20
361
7225
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120-150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
100
718
71871
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using al. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T'. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.
100
2099
209988
... More
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the sofit with the help of sofit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with the help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :
-
-
-
... More
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted afer bending.
50
2161
108086
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
100
334
33437
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
2000
180
361280
... More
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
2000
156
312520
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
500
220
110070
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3000
151
455520
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Two coats
1500
133
200610
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
-
-
-
... More
Old work (one or more coats)
1500
61
91515
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
3000
24
73410
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
... More
One or more coats on old work
500
100
50010
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground notified by MCD Delhi within any lead all complete as per direction of Engineer-in-Charge.
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand)
50
532
26631
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba to dumping ground notified by MCD Delhi within any lead all complete as per direction of Engineer- in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
50000
-
24500
... More
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
120
105
12646
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm
1000
331
331550
... More
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish to dumping ground notified by MCD Delhi within any lead, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
2200
82
181632
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
10
422
4220
... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba to dumping ground notified by MCD Delhi within any lead all complete as per directions of Engineer-in-Charge.
20
130
2610
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
20
417
8350
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material within 50 metres lead and disposal of unserviceable material to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
300
71
21426
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material within 50 metres lead and disposal of unserviceable material to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
50
259
12963
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the serviceable material within 50 metres lead and disposal of unserviceable material to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
-
-
-
... More
100 mm dia pipe
10
75
759
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
100
53
5317
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
50
365
18283
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
2
9844
19689
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground notified by MCD Delhi within any lead and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
1000
128
128190
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
1000
392
392070
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
6584
52677
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
8
6339
50717
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
10
2166
21662
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
3
17721
53163
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
... More
20 mm nominal dia Pipes
30
325
9779
... More
25 mm nominal dia Pipes
30
390
11721
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal dia Pipes
50
523
26154
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
10
85600
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
12425
24852
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
... More
L D- 2.5 : Rectangular shape 600x450 mm internal dimensions
20
1398
27977
... More
M D - 10 : Circular shape 500 mm internal diameter
10
1140
11409
... More
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
20
765
15315
... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.
-
-
-
... More
Rectangular manhole 90x80 cm and 45 cm deep
2
2472
4945
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :
-
-
-
... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5
5
2554
12773
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
5797
28985
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)
120
516
61988
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)
80
617
49386
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
30
1464
43938
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge.
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
10
2747
27476
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
150
621
93167
... More
Supplying & stacking of following materials at site/Enquiry Office of approved make:
-
-
-
... More
Portland Cement (OPC-43 Grade)
250
356
89213
... More
White Cement
50
14
728
... More
Anodised Aluminium tower bolt (barrel type) 200x10 mm
50
55
2768
... More
Anodised Aluminium tower bolt (barrel type) 150x10 mm
50
44
2215
... More
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
50
46
2320
... More
Anodised Aluminium handles 100 mm with plate 150 x 32 mm
100
40
4015
... More
Aluminium hanging floor door stopper with twin rubber & stopper
20
60
1218
... More
Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
10
1028
10285
... More
Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10
10
969
9690
... More
Supplying & stacking of following materials at site/Enquiry Office of approved make:
-
-
-
... More
Circular shape 500 mm dia precast R.C.C. manhole cover with frame- M.D.-10
10
837
8375
... More
White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings
20
1010
20211
... More
15 mm PTMT bib cock
100
96
9690
... More
PTMT pillar cock
100
173
17305
... More
PTMT grating 100 mm dia
50
23
1178
... More
PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball
20
109
2187
... More
PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball
50
166
8305
... More
15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts
30
55
1661
... More
Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked
50
48
2423
... More
Supplying & stacking of following materials at site/Enquiry Office of approved make:
-
-
-
... More
Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked
30
31
935
... More
Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia
51
59
3035
... More
Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia
51
81
4167
... More
Coarse sand (zone III)
5
2007
10036
... More
Fine sand (zone IV)
5
1356
6783
... More
White plastic seat (solid) with lid C.P. brass hinges and rubber buffers
50
624
31215
... More
Mirror of superior make glass 60x45 cm
20
622
12459
... More
C.P. Brass bibcock 15 mm
20
456
9136
... More
C.P. Brass long body bibcock 15 mm
20
733
14674
... More
Supplying & stacking of following materials at site/Enquiry Office of approved make:
-
-
-
... More
C.P. Brass angle valve 15 mm
100
523
52325
... More
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
50
37
1868
... More
Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 18 mm thick confirming to IS:14587
100
829
82920
... More
PVC edge bending tape 2.00 mm thick
50
30
1523
... More
1 mm thick 35 mm wide bright finished stainless steel piano hinges
50
72
3600
... More
Stainless Steel Single Towel Rail 600mm Long of make Jaquar (Cat No: ACN-1111SM) or equivalent
20
1500
30004
... More
Stainless Steel Towel Ring Round with Round Flange of make Jaquar (Cat No: ACN-1121BN) or equivalent
20
1117
22356
... More
CP Pillar cock 15mm of make Jaquar (Cat No: COP-011PM) or equivalent
30
1706
51185
... More
CP Brass Two-way angle valve of make Parryware (Cat No: G4743AI) or equivalent
30
1479
44384
... More
Supplying & stacking of following materials at site/Enquiry Office of approved make:
-
-
-
... More
CP health faucet with 1.00m connecting pipe, S.S. hose & hook of make Parryware (Cat No: T9940A1) or equivalent
50
737
36858
... More
Providing and fixing polycarbonate sheets 2.85 mm thick UV coating non breakable in window shutters with MS beading of size 12X3 mm fixed with welding or nut bolt where ever required at all floor levels all complete as per direction of Engineer - in - charge. (Cost for beading shall be paid separately).
30
1446
43386
... More
Providing and fixing digital Joint free glazed wall tiles (thickness to be specified by the manufacturer), of approved make, in all colours and shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
20
1365
27305
... More
Cleaning of sewer tank for E.T.P plant by supersucker machine with 2 tankers and one pump set for cleaning of sewage collection tank by taking out the seweage by super sucker machine and disposal of efluents at dumping ground with help of pump set for stopping of fresh sewage coming into tank by byepassing the effluent by dropping it another sewer line complete as per direction of Engineer-in-charge.
100
1697
169740
... More
Carrying out of welding work by engaging one welder with welding machine and necessary equipment for welding (welding machine, welding rod, cutting wheels and required material if required) including necessary finishing all complete as per direction of Engineer-in-Charge.
50
1661
83058
... More
Credit and disposal of old damaged and dismantled PVC tank and other plastic and PVC articles (The material will be the property of contractor) Note: Actual weight of the material to be measured for payment.
80
-20
-1600
... More
Credit and disposal of old damaged and dismantled C.P brass fittings and other brass articles (The material will be the property of contractor)
Note: Actual weight of the material to be measured for payment.
50
-350
-17500
... More
Credit and disposal of old damaged and dismantled Steel/Iron/M.S/G.I and other similar articles (The material will be the property of contractor)
Note: Actual weight of the material to be measured for payment.
100
-25
-2500
... More
Credit and disposal of old damaged and dismantled wooden/particle board/block board/ply and other similar articles (The material will be the property of contractor)
Note: Actual weight of the material to be measured for payment.
50
-10
-500
... More
Credit and disposal of old damaged and dismantled Aluminium article like fittings and aluminium sections and other similar articles (The material will be the property of contractor)
Note: Actual weight of the material to be measured for payment.
50
-120
-6000
... More
Credit and disposal of old damaged and dismantled Stainless steel articles (The material will be the property of contractor)
Note: Actual weight of the material to be measured for payment.
20
-120
-2400
... More
Credit and disposal of empty bucket of paint of any capacity (The material will be the property of contractor)
Note: Actual quantity of the material to be measured for payment.
80
-100
-8000
... More
Attending various jobs pertains to SEWER MAN (semi skilled) like opening and cleaning of gully traps, road gully chamber, water closets, floor traps, wash basins, kitchen sinks including the vertical stacks, rain water pipes etc. cleaning with acid/biodegradable chemical/detergent whenever required as per satisfaction of occupant/ Engineer in charge etc all complete as per direction of Engineer-in-Charge. All work is to be attended during 9.00 AM to 5.00 PM or as directed time period in proper uniform, necessary T & P like khappachi, roap, spade mask with oxygen cylender life saving belt etc. shall be provided by the contractor.
312
1093
341063
... More
Attending various complaints pertains to PLUMBER (Skilled) like fixing of water supply related fitting, sanitary related pipes and fittings, flush valve and fittings, connecting geysers, pillar cocks, stop cocks, bib cocks, pipes, waste pipes, flush pipes, cisterns, w.c pans, mixer of all kinds, showers and all other such fittings etc. complete as per the direction of Engineer-in-Charge. All works is to be attended during 9.00 AM to 5.00 PM or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.
312
1198
373885
... More
Provide/Deploye a Carpenter for attending various Carpenter related complaints like adjusting door closer, easing out of doors/ windows/ ventillators, fixing of fittings & Fixtures of doors/ windows/ ventillators and repairs of wooden partitions, doors, windows etc. complete as per directions of engineer-in-charge. All work is to be attended during 09:00 a.m to 06:00 p.m daily i/c holidays (Except sunday) for a month by Carpenter in proper uniform shall be treated a one job per month. Necessary T&P shall be provided by the contractor.
312
1198
373885
... More
Provide/Deploye a Supervisor cum Office attendant for attending services of Supervisor cum Office attendant for writing maintenance complaints, issue of required materials to the skilled labours for attending complaints including assigning various works in the complaint daily and supervise them at site etc. complete as per directions of engineer-in-charge. All work is to be attended during 9.00 AM to 5.00 PM by Carpenter in proper uniform. Necessary T&P shall be provided by the contractor.
624
1198
747770
... More
Attending various complaints pertains to BELDAR/COOLI (unskilled) like unkeeping and maintenance of various premises and helping to skilled manpower whenever in need and cleaning the outlets of rain water etc. complete as per the direction of engineer-in-charge. All work is to be attended during 9.00 AM to 5.00 PM or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.
936
993
929916
... More
Attending various complaints pertains to MASON like repairing of floors, walls, plaster, ceilling, grading on roof, brick edging, making repairs of holes thereof, masonry jobs in laying of pipes, w.c. pans etc. complete as per the directions of Engineer In charge All works is to be attended during 9.00 AM to 5.00 PM or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.
312
1198
373885
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements