Public Works Department Tender

Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. A) 3 x 10

Supplying & Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. A) 3 x 10

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Supply, Installation, Testing Commissioning of 3 mtr height decorative ornamental Steel Poles made out of galvanized Mild Steel tubes having 114mm dia x 4mm thickness x 1000mm height at bottom and 75mm dia x 3mm thickness x 2000mm height at Top with cast aluminum emb-Q3. The poles are primer coated and painted with polyurethane paint. The pole has a service window at the bottom comprising four way 25 Amp connector terminal and a MCB poles has a mild steel base plate having four numbers mounting holes and can be mounted with four numbers anchor bolts i/c making connection in mcb, testing and commissioning etc as reqd.

Supply, Installation, Testing Commissioning of ornamental double arm bracket made of 42 mm dia galvanized steel tubes primer coated and painted with polyurethane paint, with aluminum embellishment and suitable for mounting of hanging luminaries i/c fixing on pole etc as reqd.

Supply, Installation, Testing Commissioning of 25 W Hexagonal Small Post Top LED Fitting made of die cast aluminum base with spun aluminum top and fitted with LED PT Module Power LED's mounted directly on inbuilt extruded aluminum, a Heat Sinks. A UV stabilized P.C. diffuser is provided for Glare Free Lighting with high visual comfort having voltage operating range 100-270 v ,power factor .95 ,system efficacy 100 lumen /W colour Temp 4000 K and life 50000 H i/c making connection ,testing and commissioning etc as reqd. (Make :- Twinkle Lux Max Cat No Lux Max -PT-165 or equivalent make of Twinke Light / Hilite / Luster)

Erection of metallic pole of 3 mtr height in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying, installation, Testing & Commissioning of 200 watt Flood Light, powder coated pressure die cast aluminum body with built in driver ( 700ma), Input voltage: Input voltage: 100-240 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency 85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-65,IK-08, CRI 80 , under voltage and over voltage protection, EMI-EMC As per CISPER 15 A, lenses for beam angle 45* 120 deg., suitable tilt able fitting, life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 5700°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard, OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required" , (LM79 & LM80) certificate / Report from OEM shall be submitted. Minimum 5 year OEM warranty, System lumen efficacy ≥120 and 135 lm/Watt output All as per pre approved by Engineer-in-charge (Thermal management: heat sink of aluminium housing. aluminum metal core printed board of thermal conductivity more than 2.0W/mk and thermal pad with thermal conductivity more than 1.5W/mk etc. as required.

Supplying, Installation, testing and commissioning of 8-11 Watt LED Mini Bollard fitting made out of CRCA sheet, duly powder coated /Aluminium body, confirming to IP - 65, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, having power factor ≥ 0.90, CRI 80, Luminaries efficacy ≥ 70 lumen/watt , Driver efficiency 85%, L-70 Life 50,000 burning hours. complete as required

S.I.T.C of 6-10 W LED bulkhead fitting made out of CRCA sheet duly power coated/Cast Aluminium body, confirming to IP66, suitable for operation on 240 V, 50 Hz AC Supply having power factor ≥ 0.90, complete i/c making connection, testing and commissioning etc complete as reqd. (Note:- Contractor shall submit 5 Years guarantee certificate of respective manufacturer along with the fitting).

Supplying, installation, Testing & Commissioning of 12-15 watt LED Recessed/surface Panel Down lighter (Round / square/ Rectangular), powder coated die cast aluminium/polycarbonate body with built in driver ( 750ma), Operating voltage AC 100-240 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10% , P. F.≥0.95, IP20, CRI 80 , life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 5700°K(As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required" , (LM79 & LM80) certificate / Report from OEM shall be submitted, Minimum 5 year OEM warranty, System lumen efficacy ≥120 and 135 lm/Watt output etc as required.

Less Credit of Dismantle Material a) Defective bulkhead/ LED Fittings

Damaged cable / wire upto 35 sq.mm

Flood Light fitting