Public Works Department Tender

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore.

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Labour engaged for taking out bathroom fixtures, concealed G.I pipes, wall and disposal of serviceable & unserviceable material within 50 meters lead as per direction of Engineer-in-charge and for other required works at site

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters. 35mm

Providing and fixing PVC pipe embedded in 1: 5: 10 inclu. trenching and refilling and making good the floor and wall complete.

110mm nominal outer dia pipes.

150mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work concealed.

20mm nominal outer dia pipes.

15mm nominal outer dia pipes.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18mm

Providing and laying Superior quality vitrified wall tiles (thickness not less than 10 mm), of approved make, in all colours, shades of any size not less than 600 mm X 1200 mm as approved by Engineer- in-Charge, in wall over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing with epoxy grout mixed with pigment of matching shade complete along with spacers including wastage Basic rate of tile shall not be less than Rs. 100 per sft.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board

Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

1 mm thick

2 mm thick (item 18 - item 19 (i))

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete job

Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work .

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing shower cubicles made up of 10mm thick toughened glass with all patch fittings using ozone patch fitting complete with S.S brackets, hinges, rod and handles (Saint gobain, modiguard or equivalent)

Engaging carpenter for day to day repairs to woodwork like doors, windows etc

Supply and laying of carpet ( wall to wall) in room including pasting and wastage complete job. Basic cost= 220/ sft. Design as approved by higher authorities.

Supplying and placing in position of revolving chair made up of stainless steel, seats, arm rest and back cladded with leatherite alonwith underneath foam padding approx. Size :- (W)560mm X (D)660mm X (H)1000mm, max seat height- 520mm, mini seat height- 425mm, back height- 480mm, seat depth- 450mm ( Standard Chair). Size may vary as per availability of space.

Supplying and installation/assembling of conference table made up of 18mm thick commercial board, horizontal and vertical members, Leg/ skirting in solid hard wood as per approved design. Top surface to be made up of commercial board lipped with laminate of approved shade and make as per approved design and corners should be curved complete job. approx. size of table = 8' x 3'- 8"x 2'6" height. size may vary as per availability of space at site.

Providing and fixing of sanitary fittings , fixtures complete job.

Angular stop cock with wall flange (Jaquar or equivalent)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Wall mixer 3-in-1 system (Jaguar or equivalent )

Wash basin mixer Single lever (Jaquar or equivalent)

Waste Coupling Waste Coupling 32mm Size Full Thread with 130mm height (Jaquar or equivalent)

Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories (Jaquar or equivalent)

Nanhi Trap 3"

Table top washbasin 495x395 (Jaquar or equivalent)

Vertical Shower Drain Channel (24 x 5 Inches) with Cockroach Trap (304 Grade)

PVC connection

Maze over head shower 240mm (Jaquar or equivalent)

Shower arm 20mm dia & 600mm long (Jaquar or equivalent)

Maze hand shower single flow (Face plate stainless steel & ABS Body cleaning system Model(Jaquar or equivalent)

Flexible Tube 12mm Dia & 1.5m long with nuts (Jaquar or equivalent)

Premium wall Bracket for hand shower Jaquar or equivalent

Health faucet (Jaquar or equivalent)

Toilet roll holder with stainless steel flap (Jaquar or equivalent)

Towel ring with flange Jaquar or equivalent

Soap Dish Holder Jaquar or equivalent

Towel rail 600 mm ( Jaquar or equivalent)

Bottle Trap ( Jaquar or equivalent)

Robe Hook (Jaquar or equivalent)

Tumbler Holder (Jaquar or equivalent)

Corner Glass Shelf (with Bracket) ( Jaquar or equivalent)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing of book shelf made up of 18 mm thick HDHMR for all horizontal and vertical members with 8 mm thick HDHMR board on the backside (both side laminated) inside surface lipped with sunmica(not less than 0.8 mm thick) and exposed surface finished with Laminate of superior grade(not less than 1 mm thick) of approved shade and quality along with shutters made of solid teak wood and 5mm thick glass embeded including all hardware fittings, hinges, handles, (hettich or equivalent) complete job basic rate of HDHMR board = Rs. 1275 per sqm and laminate Rs. 310 per sqm. Elevation area to be measured for payment.

Supply and fixing of Frosted Film over existing tougneed glass. the job includes cleaning of glass and chemicals before fixing.

Removal of waste by mechanical means and disposal of the same beyond municipal limits