Public Works Department Tender

Providing services of Hydraulic Mobile Pick and carry Crane Capacity up to 15.00 Tonne for 8 Hours per day for removing Jersey Barriers from one place to another place, aligning the same, lifting the vehicles, heavy materials etc. including the cost of driver, supervisor all complete as per directions of Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Note:- Payment will be made as per weight slip issued by authorised MCD dumping ground after dumping of malba. Processing fees at prescribed rate of authorised MCD dumping ground will be submitted by the agency & shall be reimbursed by the department on production of receipt in original.

Add cost index @3% on DSR Items on Rs. =

Providing services of maintenance vehicle TATA 407/609 tipper or equivalent with mechanically unloading facility (Engine CC more than 2900 CC) and shall be GRAP Stage-IV compliant, of specified size having GPS tracking device 360 degree Sim Based Camera conforming to Particular Specifications as mentioned in the NIT document. The GPS System with 360 degree sim based camera shall be provided and fixed by the agency in the maintenance vehicle and further maintenance and operation of the same shall be done by the agency. The maintenance vehicle shall be provided with one driver with smart mobile phone facilities, four beldars with essential tools required for lifting etc. as mentioned in the Particular Specifications in NIT document for carrying out the following activities complete to the satisfaction of Engineer- in-Charge. Note:(1.) The hire charges of maintenance vehicle is on per day basis are for normal working hours of 8.00 Hrs. shift and as when required during night also, however the vehicle should be mobilised by the agency in case of urgency /emergency within two hours of giving information by Engineer-in-Charge. (2.) Including cost of services of operating staff/driver, loading, unloading, all leads and lifts from site of work. Cost of lubricating oil, diesel/Petrol/Kerosene oil, CNG, other consumables for running the maintenance van, required tools and equipments for carrying out works mentioned below.

Providing the service for supervisor, having knowledge of road maintenance and civil work, equipped with Motorcycle, android mobile at list 5.0” screen i/c internet & Data transfer facility, conversant in Hindi and English for daily inspection/Supervision of roads under the jurisdiction of PWD Division SER-1 as per direction of Engineer-in-Charge for working hours of 8 hours shift. (No extra payment will be admissible, rates are inclusive of all expenses).

Providing services of maintenance van of approved make of Mahindra Bolero Maxx or equivalent with minimum engine capacity 2500 CC or more and GRAP Stage-IV compliant, of specified size having provision for installing GPS tracking device with 360 degree Sim based camera conforming to Particular Specifications as mentioned in the NIT document. The GPS System with 360 degree sim based camera shall be provided and fixed by the agency in the maintenance van and further maintenance and operation of the same shall be done by the agency. The maintenance van shall be provided four beldars/sewer man, One driver and one mason/welder (as per requirement) with essential tools like bituminous road cutter, automatic plate vibrator, Air compressor, Hilti breaker, welding machine and other essential tools required for repairs, etc. as mentioned in the Particular Specifications in NIT document for carrying out the following activities complete to the satisfaction of Engineer- in-Charge. Note: (1.) The hire charges of maintenance van is on per day basis are for normal working hours of 8.00 Hrs. shift, however the van should be mobilised by the agency in case of urgency /emergency, other than normal working hours within two hours of giving instructions by Engineer-in-charge for which payment shall be made as per relevant item. (2.) Include cost of services of operating staff/driver, Cost of lubricating oil, diesel/Petrol/Kerosene oil, CNG, other consumables for running the maintenance van, required tools and equipments for carrying out below mentioned works. Daily inspection of roads for observing the deficiencies mentioned below and rectification as per time schedule of scope of work.

Deduct on Account of GST on DSR items Sl.No. 4 & 9 as per correction factor @0.973 on DSR 2023 Items as per SE(TAS)CPWD O.M. No. 158/SE(TAS)/GST/2024/02-E dated 08/08/2024 (on DSR item) on Rs=

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Extra for Providing services of maintenance van beyond 08 (Eight) working hours duty (rate is over and above base item).

Hiring and operation of hydraulic excavator (3D)/JCB Machine for 8 Hours per day for dressing of kutcha portion and removal of malba i/c loading, unloading of dismantled material in trucks or dumpers, levelling and dressing of ground etc. including all risk involved in demolition operations etc. i/c cost of driver, helper, diesel, lubricants etc. complete as per direction of Engineer-in- Charge.

Collection and Removal of malba/rubbish/ garbage/similar unserviceable dismantled or waste materials, construction waste etc. from different locations along the road footpath, berm portion and road side and disposal at temporary collection site of Sub Division/Division & any other work assigned by the Engineer-in-Charge.