Netaji Subhas Institute Of Technology Tender

79 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

37 Providing and fixing Benchtopfumehood 4 feet width etc as per direction of Engineer-In-Charge. BenchtopFumehood of (4 feet): Overall dimension of 1200x 900 x 2400, Working Volume 920x665x1180. Superstructure Frame: It shall be a free-standing rigid panel structure of steel (G.I.) Interior Walls: Double wall ends, not more than 6” wide, shall be provided to maximize interior working area. The area between the double wall ends shall be closed to house the remote control valves. Cut-outs shall be provided inside the fume hood for service line accessibility. The same to have a cover with a fastener free design. The vertical fascias shall contain the required service controls, electrical switches and receptacles. ----- LED LIGHT: Two LED Lights of Philips or equivalent make shall be provided in the fume hood. The lighting fixture shall be completely outside the fume hood area. The luminosity on the work surface shall be average 600 Lux. Fume hoods are designed to rest on pedestal or a cabinet which is a complete rigid steel structure. Gauge of steel used in its construction shall be 0.8 mm GI for apparatus storages, FIXED TYPE APPARATUS STORAGE CABINET FOR BENCH TOP FUME HOOD (600 WIDTH) and Rear Support Panel Offixed Type Apparatus Storage Cabinet For BenchtopFumehood, Ceiling Front Cover Panel For 4 Feet Fumehood and Ceiling LH/ RH Side Cover Panel For Fumehood

4 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade a) Area of Slab upto 0.50 sqm