Netaji Subhas Institute Of Technology Tender

4 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : a 250x16 mm

5 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : a For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

b For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

6 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge Pre-laminated particle board with decorative lamination on both sides

7 Dismantling the existing worn out / defective fittings from the ceiling and SITC of minimum 36 watt ultra slim energy efficient LED Panel light fitting having aluminium body system efficacy minimum 100 lumen/watt LM79, color temp 6500 deg K, recess mounting suitable for fitting in the 600mm x 600mm square existing space having symmetric glare free illumination in the false ceiling complete with all standard accessories including drivers, dash fastener & chain connection etc. complete as required

8 Dismantling and Buy Back of following electrical items (Contractor shall handed over the E-waste to authorised vender who registered under DPCC also shall submitt the certificate of authorised vendor of DPCC for completion of E- waste dispose. 8.1 Light fitting 2 x 2