Netaji Subhas Institute Of Technology Tender

4 Supply of Stainless Steel (304-Grade) four shelves pot rack of Size 1050x610x1800mm made of : (i) Shelves - three shelves of size 1050x610mm each made of 38x38x1.5 mm ss pipe 304 grade, The cross pipes shall be fixed at spacing of maximum 100mm centre to centre. The bottom shelf shall be placed at 150mm above from the bottom of frame. (ii) Frame- vertical legs made of 38x38x1.5mm.ss pipe grade 304, (iii) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (iv) All complete as per directions of Engineer in charge.

5 Supply of Stainless Steel (304-Grade) work table with two under shelf of Size 2100x600x850+150mm made of : (i) Table top- made of 1.5mm thick sheet . (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides including one cross bracing to support the table top. (iii) Frame- vertical legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Shelves:- Two shelves shall be created under the table top by placing 1.5mm thick SS sheet 304 grade. The bottom sheet shall be fixed right over the horizontal bracing. The upper sheet shall be fixed by providing additional frame made of 38x38x1.5mm thick SS Angle 304 grade. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

6 Supply of Stainless Steel (304-Grade) work table with sink unit of Size 1500x610x850+150mm including CP drain waste coupling, waste pipe and also including one no. cp brass mixture complete fitted sink units of size 450x450x250mm complete, made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

7 Supply of Stainless Steel (304-Grade) spreader table of Size 450x750x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

8 Supply of Stainless Steel (304-Grade) work table of Size 1250x450x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

9 Supply of Stainless Steel (304-Grade) work table of Size 1200x610x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

10 Supply of Stainless Steel (304-Grade) work table of Size 650x610x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

11 Supply of Stainless Steel (304-Grade) work/pick up table of Size 1400x475x850mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides including one cross bracing to support the table top. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (v) All complete as per directions of Engineer in charge.

12 Supply of Stainless Steel (304-Grade) single sink table of Size 610x675x850+150mm including CP drain waste coupling, waste pipe and also including one no. cp brass mixture complete fitted of size 450x500x250mm complete, made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

13 Supply of Stainless Steel (304-Grade) two sink unit of Size 1125x610x850+150mm including CP drain waste coupling, waste pipe and also including one no. cp brass mixture complete fitted each sink of size 450x450x250mm complete, made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

14 Supply of Stainless Steel (304-Grade) work table with one under shelf of Size 2000x610x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides including one cross bracing to support the table top. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Shelves:- One shelves shall be created by under the table top placing 1.5mm thick SS sheet 304 grade. The bottom sheet shall be fixed right over the horizontal bracing. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

15 Supply of Stainless Steel (304-Grade) Platform trolley of Size 900x610x900mm made of : (i) Platform top- made of 1.5mm thick sheet. (ii) Platform Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) 4 nos double P U caster with breaks of superior quality. (iv) The handle support made of 900mm high 38x38x1.5 mm ss pipe grade 304,two no. with appropriate curvautre at top, two cross bracing made of pipe one at top and second at start of curvature, one vertical support pipe placed at centre of two main handle pipes starting from bottom up to the start of curvature. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

16 Supply of Stainless Steel (304-Grade) work table with sink of Size 1350x675x850+150mm including CP drain waste coupling, waste pipe and also including one no. cp brass mixture complete fitted of sink size 450x450x250mm complete made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame - legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304, Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vi) All complete as per directions of Engineer in charge.

17 Supply of Stainless Steel (304-Grade) work table with two under shelf of Size 1350x675x850+150mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides with table with proper curvature given at top. (v) Shelves:- Two shelves shall be created under the table top by placing 1.5mm thick SS sheet 304 grade. The bottom sheet shall be fixed right over the horizontal bracing. The upper sheet shall be fixed by providing additional frame made of 38x38x1.5mm thick SS Angle 304 grade. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

18 Supply of Stainless Steel (304-Grade) cash counter table of Size 1100x675x850mm made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) one side of length wise shall be covered with 1.5 mm thick ss sheet of grade 304, (v) one drawer of size 300x400x150 mm made of 1.5 mm thick ss sheet grade 304,including superior quality locking arrangement. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

19 Supply of Stainless Steel (304-Grade) cutlery counter table with two under shelf of Size 1250x675x850mm made of : (i) Table top- made of 1.5mm thick sheet . (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides including one cross bracing to support the table top. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) one side of length wise shall be covered with 1.5 mm thick ss sheet of grade 304. (v) Shelves:- Two shelves shall be created under the table top by placing 1.5mm thick SS sheet 304 grade. The bottom sheet shall be fixed right over the horizontal bracing. The upper sheet shall be fixed by providing additional frame made of 38x38x1.5mm thick SS Angle 304 grade. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

20 Supply of Stainless Steel (304-Grade) hot bain marie counter table of Size 1800x675x850mm (including 5 Nos. GN pans and covers, tank, electric heater with thermostate control, mineral wool insulation etc. as per standard design) made of : (i) Table top- made of 1.5mm thick sheet. (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides. (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) one side of length wise shall be covered with 1.5 mm thick ss sheet of grade 304, (v) GN pans shall be covered from front and sides with 1.5mm thick ss sheet grade 304. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

21 Supply of Stainless Steel (304-Grade) work/pick up table with one under shelf of Size 1350x610x850+150mm made of : (i) Table top- made of 1.5mm thick sheet . (ii) Top Frame - made of 38x38x3 mm ss angle 304 grade at top to fix sheet on all four sides (iii) Frame- legs and horizontal bracing made of 38x38x1.5mm.ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) The sheet shall be raised 150mm vertically on the back sides of the table with proper curvature given at top. (v) Shelves:- One shelves shall be created by under the table top placing 1.5mm thick SS sheet 304 grade. The bottom sheet shall be fixed right over the horizontal bracing. (vi) Also including argon welding, grinding, buffing, polishing & making curvature (wherever required) with necessary stainless steel nuts and bolts. (vii) All complete as per directions of Engineer in charge.

22 Supply of stainless steel (Grade 304) dining table of Size 900x900x750mm (as per drawing) made of : (i) Table top- 18mm thick Z-Black granite top with all round edge moulding glossy finished of size 900x900 mm. (ii) Ply- 12mm thick ISI commercial ply of size 850x850 mm duly priming and painted to prevent the voice of cluttering below the granite. (iii) Frame and legs- made of 38x38x1.5mm ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) Also including welding, grinding, buffing, polishing and making curvature (wherever required) with necessary stainless steel nuts and bolts complete. (v) All complete as per directions of Engineer in charge.

23 Supply of stainless steel (Grade 304) dining table of Size 1200x850x750mm (as per drawing) made of : (i) Table top- 18mm thick granite table top with all round edge moulding glossy finished of size 1200x850 mm (ii) Ply- 12mm thick ISI commercial ply of size 1150x800 mm duly priming and painted to prevent the voice of cluttering below the granite. (iii) Frame and legs- made of 38x38x1.5mm ss pipe grade 304,Horizontal bracing at 150 mm above from the bottom including shoe of superior quality provided in legs. (iv) Also including welding, grinding, buffing, polishing and making curvature (wherever required) with necessary stainless steel nuts and bolts complete. (v) All complete as per directions of Engineer in charge.

24 Supply of stainless steel (Grade 304) chairs (as per drawing) with perforated seat all complete as per approved sample and the directions of Engineer-in-charge (weight of chair should not be less than 3.70 Kg./chair).