Netaji Subhas Institute Of Technology Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Netaji Subhas Institute Of Technology - NSIT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date1 Mar 2024
Closing Date8 Mar 2024
Tender Amount₹ 4,15,48,754
Costs
EMD
₹ 8,30,975Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Development Of Labs Offices And Committee Rooms At Nsut Main Campus Composite Work
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSIT_255152_1Bid Award Id
ViewTender No
NIT No.57/VC/2023-2024/NSUTTender Authority
Netaji Subhas Institute Of Technology ViewPurchaser Address
-Website
http://http://www.nsit.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3(1 cement : 1.5 coarse sand ( zone III ) : 3 graded stone aggregate 20mm normal size.
2
21438
10719.3
... More
4 Centering and shuttering including strutting, propping etc. and removal of form for : a) Suspended floors, roofs, landings, balconies and access platform.
15
11498
766.55
... More
b) Edges of slabs and breaks in floors and walls: Under 20 cm wide
19
3456
181.9
... More
5 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
a) Thermo-Mechanically Treated bars Fe- 500 D or more
300
26895
89.65
... More
6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
a) Cement mortar 1:4 (1 cement : 4 coarse sand)
3
25536
8512.1
... More
7 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level
a) Cement mortar 1:4 (1 cement :4 coarse sand)
7
7126
1018.05
... More
8 Stone work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match.
a) 18 mm thick Granite of any colour and shade
93
313884
3375.1
... More
9 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
a) Area of Slab upto 0.50 sqm
4
18717
4679.35
... More
b) Area of slab over 0.50 sqm
21
92932
4425.35
... More
10 Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. a) Granite work
139
58220
418.85
... More
11 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
19
9035
475.55
... More
12 Stone (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
a) 18 mm thick Granite of any colour and shade
24
91317
3804.9
... More
13 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 600 mm x 300 mm or as decided / approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete as per the directions of Engineer-in-charge.
31
32966
1063.45
... More
14 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including priming coat with approved steel primer all complete.
10
10158
1015.89
... More
15 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
3
21749
7249.7
... More
16 Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
27
219665
8135.75
... More
17 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockinghaving transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
12
123416
10284.7
... More
18 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate imension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
17
129779
7634.1
... More
19 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
149
21202
142.3
... More
20 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. all complete as per the directions of Engineer-in-charge
a) 10x60mm
48
5361
111.7
... More
21 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
228
891206
3908.8
... More
22 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
24
6073
253.05
... More
23 12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
25
7371
294.85
... More
24 15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 fine sand)
25
8492
339.7
... More
25 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.
Two or more coats on new work
180
16695
92.75
... More
26 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Water thinnable cement primer
180
11601
64.45
... More
27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
180
22293
123.85
... More
28 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
180
3753
20.85
... More
29 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material to MCD approved dumping ground for all leads and lifts all complete as per directions of Engineer-In-Charge.
1
2928
2928.1
... More
30 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
a) Of area 3 sq. metres and below
6
1816
302.7
... More
b) Of area beyond 3 sq. Metres
10
4145
414.55
... More
31 Dismantling tile work in floors and roofs laid in cement mortar including disposal of unserviceable material to MCD approved dumping ground for all leads and lifts all complete as per directions of Engineer-In-Charge.. For thickness of tiles 10 mm to 25 mm
212
12826
60.5
... More
32 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to MCD approved dumping ground for all leads and lifts all complete as per directions of Engineer-In-Charge.
93
4189
45.05
... More
33 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
27
26057
965.1
... More
34 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width
158
13469
85.25
... More
35 Providing and fixing toughened double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete
33
132440
4013.35
... More
36 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987,Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-ChargeWith semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
212
358375
1690.45
... More
37 Providing and fixing manual chain operated roller blinds consisting of 100% Polyester fabric, fabric thickness 0.50 mm, fabric weight = 270 gsm ± 5%, fabric width 230 cms, tearing strength 4.5 kgf warp, bursting strength 34 kgf, colour fastness to light 5 to 6 grade in position of standard quality and approved shade/colour including necessary accessories, MS clamps, screws and drilling etc. as required all complete as per the directions of Engineer-in-charge
31
44740
1443.25
... More
38 Providing and placing of modular workstations system of size 8100mm (W) X 900mm (D) x 750 with 09 seats on two sides back to back having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions 2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. Legs Construction- Legs are fabricated by CO2 welded MS Tube of section 38mm x 25mm x 16 swg (IS: 7138) with the base plate of the Hot Rolled MS plate of 35x22x5mm (IS: 2062) over which an M8Leveller is fitted which allows for adjustment of the height by 50mm. It will be coated with 45-50micron thickness of epoxy powder coating. ----------------------------- All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Worktop is fitted to the panels by worksurface brackets. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513-19. Brackets are slided in between end trim and vertical extrusions. The product should be complete and as per approved sample and as per the direction of Engineer- In-charge.
3
1620712
540237.6
... More
39 Providing and placing of modular workstations system of size 8100mm (W) X 450mm (D) x 750 with 09 seats having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions 2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. Legs Construction- Legs are fabricated by CO2 welded MS Tube of section 38mm x 25mm x 16 swg (IS: 7138) with the base plate of the Hot Rolled MS plate of 35x22x5mm (IS: 2062) over which an M8Leveller is fitted which allows for adjustment of the height by 50mm.
------------ • Bottom Blocks Metal finish blocks shall be made from two components of 0.8mm thick M.S. CRCA Grade D as per IS: 513 powder coated with epoxy polyester finish. Aluminium Trims for End Pannel : The top trims and end trims for 22.8mm partition shall be made from aluminum extrusion having material AL96063- T6. Top trim in 22.8mm thick panel shall be slide fitted with the help of top trim connector made from PP copolymer 3530 grade. End trim for 22.8 mm thick panel shall slide with the help of end trim connector made from nylon-66. Wooden Worktop: Supplying and Fixing of Workstation Worktop as per the approved shape and site requirement made out of 25mm thick prelaminated particle board of superior quality. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Worktop is fitted to the panels by worksurface brackets. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513-19. Brackets are slided in between end trim and vertical extrusions. The product should be complete and as per approved sample and as per the direction of Engineer- In-charge.
1
306118
306118.8
... More
40 Providing and placing of modular workstations system of size 4500mm (W) X 450mm (D) x 750 with 05 seats having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions 2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. Legs Construction- Legs are fabricated by CO2 welded MS Tube of section 38mm x 25mm x 16 swg (IS: 7138) with the base plate of the Hot Rolled MS plate of 35x22x5mm (IS: 2062) over which an M8Leveller is fitted which allows for adjustment of the height by 50mm.----------------- All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Worktop is fitted to the panels by worksurface brackets. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513-19. Brackets are slided in between end trim and vertical extrusions. The product should be complete and as per approved sample and as per the direction of Engineer- In-charge.
1
170066
170066
... More
41 Providing and placing of modular workstations system of size 2700mm (W) X 450mm (D) x 750 with 03 seats having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions 2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. Legs Construction- Legs are fabricated by CO2 welded MS Tube of section 38mm x 25mm x 16 swg (IS: 7138) with the base plate of the Hot Rolled MS plate of 35x22x5mm (IS: 2062) over which an M8Leveller is fitted which allows for adjustment of the height by 50mm.
---------- The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Worktop is fitted to the panels by worksurface brackets. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513-19. Brackets are slided in between end trim and vertical extrusions. The product should be complete and as per approved sample and as per the direction of Engineer- In-charge.
1
102040
102040
... More
42 Supplying and Placing in position Faculty Table of following Specifications. Overall Dimension of the Main Desk shall be - 1500mm x 600mm The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates. Understructure - The slanted legs are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick CRCA. Worktop - Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. A Wire Management - It shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Wire riser leg or independent wire risers shall be provided as per the layout structure access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. -------------------- The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The product should be complete and as per approved sample and as per the direction of Engineer-In-charge.
2
86198
43099
... More
43 Providing and placing revolving chair as per the following specifications: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric.* Full Back Size : 45.5 cm. (W) x 53.0 cm. (H) *Seat Size :48.5 cm. (W) x 47.0 cm. (D)The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression.The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "5" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-am)de form the back-spine structure involved in multi-dimensional recline motion.The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent.The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cmThe pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. in wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors.
5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and assembled to the pedestal. 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and assembled to the pedestal.
72
972072
13501
... More
44 Providing and placing executive chair as per the following specifications: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric.* Full Back Size : 45.5 cm. (W) x 53.0 cm. (H) *Seat Size :48.5 cm. (W) x 47.0 cm. (D)The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression.The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changesThe "5" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-am)de form the back-spine structure involved in multidimensional recline motion.The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent.The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cmThe pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. in wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and assembled to the pedestal.
3
31284
10428
... More
45 Supplying and placing Visitor Chair of folllowing Specifications. Overall Dimensions of Chair-Seat Height - 46.5cm.Height - 93.5cm Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hotpressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece
armrests should be injection moulded from black Copolymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.The product should be complete and as per approved sample and as per the direction of Engineer-In-charge.
2
14756
7378
... More
46 Providing and fixing magnetic white board 6 feet long and 4 feet wide made up of lacquered glass on stainless steel studs along with Magnetic duster- 1 No., Board markers- 2 Nos and Magnetic butons- 5 Nos. All complete as per the directions of Engineer-in-charge.
2
30983
15491.58
... More
47 Providing and placing Shoe Rack - Overall Size :Width : 90cm Depth : 38.2cm Height : 90cmMaterial :All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Bottom drawer is made of .9 mm thick prelaminated particle board. Back panel is made of .9mm thick prelaminated particle board .Drawer front is made of 18 mm thick Pu painted MDF .Hardware : Hettich .Construction : Knock down Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade Packets : 1 nos. All complete as per the directions of Engineer-in-charge.
8
166112
20764
... More
48 Providing and placing Locker - Overall size of 6 - Door PLU + Lkr (Base) shall be 380mm(W)x450mm(D)x1830mm(H). DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Stackability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation.
12
254208
21184
... More
49 Deduct on account of issue of old MS Grill, MS Angle etc. to the contractor as buy-back material.
150
-5550
37
... More
50 Deduct on account of issue of old aluminium sections etc. to the contractor as buy-back material.
180
-34380
191
... More
B: ELECTRICAL WORKS SH-01 (Wiring & Accessories)
51 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
a) Group C
33
48411
1467
... More
52 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
a) Group C
14
12012
858
... More
53 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin , 15/16 Amps modular socket outlet and 15/16 Amps modular switch , connection etc . as required .
84
49224
586
... More
54 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
3
12321
4107
... More
55 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
240
80160
334
... More
56 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
220
118140
537
... More
57 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
90
24750
275
... More
b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
110
36740
334
... More
c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
250
134250
537
... More
d) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
50
50250
1005
... More
58 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required ( For computer power in Furniture )
a) 3 x 4 sqmm
150
30900
206
... More
b) 6 x 4 sq. Mm
120
47520
396
... More
59 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) 5/6 A switch
231
23793
103
... More
b) 3 pin 5/6 A socket outlet
213
25986
122
... More
60 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
a) 3 Module (100mmX75mm)
1
327
327
... More
b) 6 Module (200mmX75mm)
1
402
402
... More
c) 12 Module (200mmX150mm)
2
1094
547
... More
61 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
a) 3 Module
71
10721
151
... More
b) 6 Module
71
12922
182
... More
62 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
a) 4 way (4 + 12), Double door
1
4091
4091
... More
b) 8 way (4 + 24), Double door
1
5967
5967
... More
63 Supplying and fixing 5 amps to 32 amps, rating, 240/415 volts, 'C' Curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
a) Single Pole
36
9216
256
... More
64 Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
a) TPN MCB 63 A
2
3968
1984.17
... More
SH-02 (Light & Fixtures)
65 Dismantling the existing worn out / defective fittings from the ceiling and SITC of minimum 36 watt Aluminium slim energy efficient LED Panel light fitting having system efficacy minimum 100 lumen/watt LM79, color temp 6500 deg K, recess mounting suitable for fitting in the 600mm x 600mm square existing space having symmetric glare free illumination in the false ceiling complete with all standard accessories including drivers etc. complete as required
29
110971
3826.61
... More
66 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
18
49140
2730
... More
SH-03 (Earthing, Raceway, UPVC Trunking)
67 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
14944
7472
... More
68 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
12200
244
... More
69 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
6
4236
706
... More
70 Supplying and fixing of UPVC trunking of size 100 x 50 along with accessories on surface complete as required.
5
4920
984
... More
SH-04 (Projector/Screen System) 71 SITC of Ultra Short Throw Projector with minimum Specification /Features i.e. Brightness: Minimum 5000 Lumens or better, Projection Technology: DLP/3LCD Technology, Light Source: Laser, Resolution: Minimum Full HD, Interface: VGA, HDMI,wireless LAN, Horizontal and vertical keystone correction, Image Shift, Instant on/off, A/V mute complete with installation as per site requirement
3
626133
208711
... More
72 SITC of Projector mounting kit to mount the above projector complete with installation as per site requirement.
3
25659
8553
... More
73 SITC of Motorized Tab Tensioned Projection Screen with minimum size of 120" Diagonal with Aspect Ratio of 16:10 / 16:9 complete with installation as per the site requirement
3
134103
44701
... More
SH-05 (Networking)
74 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed steel / PVC Conduit as required. 1 Run of Cable (Make:- Commscope Systimax Only)
1970
112290
57
... More
75 Providing and fixing 24 port loaded Straight patch panel of height 1U in the existing data end rack including making connections, channel labelling etc. complete as required.
4
47819
11954.99
... More
76 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) RJ 45 Information Outlet
93
98305
1057.05
... More
77 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
a) 1 or 2 Module
93
12369
133
... More
78 Providing and fixing Stranded Low smoke Halogen Cordage Unshielded Cat 6 Modular Patch cord of length 1 mtr with plug insertion life not less than 750 times and minimum Plug Retention force of 133N i/c making connections etc. complete as required.
93
82179
883.65
... More
79 Providing and fixing Stranded Low smoke Halogen Cordage Unshielded Cat 6 Modular Patch cord of length 2 mtr with plug insertion life not less than 750 times and minimum Plug Retention force of 133N i/c making connections etc. complete as required.
93
109811
1180.77
... More
80 SITC of 12U Floor Mount Network Rack with accessories (Make:- Rittal / APW / Emerson )
2
35503
17751.64
... More
81 SITC of 24 Port Non-PoE Managed Access Switch as per specifications and with 5 years onsite comprehensive warranty. All complete as per direction of engineer in charge.
4
708000
177000
... More
82 Suppling and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess inculding cutting the wall and making good the same in case of recessed condit as required.
25MM PVC Conduit
700
101500
145
... More
SH-04 (VRV/VRF System with LT Panel & Cabling)
83 Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%,3Phase,50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .(ODU Unit should be anti corrosive coated from factory)
38
623770
16415
... More
84 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc., suitable for operation on single phase230V±10%,50Hz AC supply, complete, as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at airinlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
a) 4.0 TR
8
271848
33981
... More
85 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings with suitable adjustable ring type hanger supports,jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
a) 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
3675
245
... More
b) 9.5 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
30
9930
331
... More
c) 12.7 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
20
9320
466
... More
d) 15.86 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
25
14700
588
... More
e) 19 mm O.D. (Hard drawn)with tube thickness 1.2mm with 19 mm thick insulation
21
14847
707
... More
f) 22.2 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation
20
17300
865
... More
g) 28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation
25
27700
1108
... More
h) 34.9 mm dia (OD) (Harddrawn) with tube thickness 1.62 mm with 19 mm thick insulation
21
25830
1230
... More
i) 41.27 mm dia (OD) (Harddrawn) with tube thickness 1.62 mm with 19 mm thick insulation
20
26180
1309
... More
86 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete and duly insulated with 9 mm thick closed cell nitrile rubber insulation as per direction of Engineer in Charge.
a) 25 mm nominal dia Pipes
150
61282
408.55
... More
b) 32 mm nominal dia Pipes
40
20038
500.95
... More
c) 40 mm nominal dia Pipes
20
13487
674.35
... More
87 Supply Installation Testing and Commissioning of control cum transmission wiring of copper in suitable PVC conduits between indoor and outdoor units size as per OEM recommendation (should be shielded cable in PVC conduits)
290
47850
165
... More
88 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
a) 300 mm width X 50 mm depth X 1.6 mm thickness
35
33705
963
... More
89 Cutting holes of required size in brick masonry wall/Concrete Wall for passing of copper pipes, Drain pipes, cable removing of false ceiling and re-fixing/placing back if required etc. and making good the same etc. complete as per direction of Engineer-in-charge.(The hole shall be made by core cutter)
8
2400
300
... More
90 Supply Installation Testing and Commissioning of Refnets/ Y-Joints/ T-Joints as per OEM recommendation and upto the satisfaction of engineer in-charge at site.
22
143000
6500
... More
91 Supplying, installation, testing & commissioning of cubical outdoor type electrical panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick i /c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 200 Amp capacity four strip aluminium alloy bus bars of high conductivity, bottom base channel of MS section not less than 5 mm thick, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq. mm. (CPRI Approved) Incoming 100 A 4 pole MCCB- 36 KA Digital Voltmeter 0-500 V with selector switch Digital Ammeter of suitable range and selector switch LED phase Indicating Light - 1 Set of 3 Nos (RYB) Outgoing 32 /40 Amp TPN MCCB --- 3 Nos for VRV/ VRF ODUs
1
200000
200000
... More
92 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
350
24500
70
... More
93 Supply of XLPE insulated Copper conductor, 1.1 KV grade cable of following size complete as required.
a) 4C x 16 Sq mm, Copper Armoured
25
34573
1382.95
... More
b) 4C X 10 Sq mm, Copper Armoured
90
85730
952.56
... More
c) 3C x 2.5sqmm, Copper Flexible for IDUs
200
27164
135.82
... More
94 Supply of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size complete as required
a) 4 C X 50 Sq. mm (Aluminium Armoured)
60
41535
692.25
... More
95 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
200
9000
45
... More
96 Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
110
6050
55
... More
b) Above 35 sq. mm and upto 95 sq. mm (clamped with
25x3mm MS flat clamp)
60
7800
130
... More
97 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a) 4 X 10 sq. mm (25mm)
4
1076
269
... More
b) 4 X 16 sq. mm (28mm)
4
1236
309
... More
c) 4 X 50 sq. mm (35mm)
2
836
418
... More
98 Comprehensive Annual maintenance of VRV/VRF Air conditioning system provided and installed under this contract with all parts/components i.e compressor, gas charging, fan motor etc(one year free defect liability period and thereafter paid) a) For 1st Year (During defect liability period)
38
-
-
... More
b) For 2nd Year
38
106400
2800
... More
c) For 3rd Year
38
111720
2940
... More
d) For 4th Year
38
117306
3087
... More
e) For 5th Year
38
123120
3240
... More
f) For 6th Year
38
129276
3402
... More
99 Dismantling & Buy Back of old & defective following items from NSUT as per required. (Contractor / Agency should be ensure that disposal of the old / defective wastage material should be disposed off through the autorised recycler registerd under Delhi Pollution Central Board / Central Pollution Control Board. Contractor/ Agency should also submit 'Certificate of Destruction').
a) Ceiling Fan
18
-9000
500
... More
b) Light Fitting
29
-2900
100
... More
Sub Head B. Addition/Alteration and Allied Works in Different Rooms at Third Floor, Administrative Block, NSUT Main Campus (Composite Work). A: CIVIL WORKS 1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. at all levels. All complete as per the directions of Engineer-in-charge.
a) Granite stone slab of any colour, shade and texture as per approved sample
i) Area of slab over 0.50 sqm
6
19808
3301.45
... More
2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edges to give high gloss finish etc. complete as per design approved by Engineer-in- Charge.
a) Granite work
100
41885
418.85
... More
3 Stone (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement all complete as per the directions of Engineer-in-charge.18 mm thick Granite of any colour, shade and texture as per approved sample.
15
57073
3804.9
... More
4 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame ork made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
a) 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)
115
175955
1530.05
... More
5 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
20
15280
764
... More
6 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.
33
1268
38.45
... More
7 Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
a) Casement cum fixed panel window having both end single casement panel, middle fixed panels with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
35
284751
8135.75
... More
8 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in 6 mm minimum thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 1200x200 mm
7
14996
2142.4
... More
9 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in 6 mm minimum thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm
8
17139
2142.4
... More
10 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 800x800 mm and 1200x200 mm
118
24207
205.15
... More
11 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in 6 mm minimum thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 1200x200 mm
111
222405
2003.65
... More
12 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in 6 mm minimum thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm
216
432788
2003.65
... More
13 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
310
398799
1286.45
... More
14 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
805
172511
214.3
... More
15 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
805
51882
64.45
... More
16 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work
805
110969
137.85
... More
17 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
351
7318
20.85
... More
18 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to MCD approved dumping ground for all leads and lifts all complete as per directions of Engineer-In-Charge. In cement mortar
5
8492
1698.45
... More
19 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
12
3632
302.7
... More
20 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
15
675
45.05
... More
21 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
206
9579
46.5
... More
22 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
68
5797
85.25
... More
23 Providing and fixing double glazed hermetically sealed toughened glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. all complete as per specifications, drawings and directions of Engineer-in-charge.
35
140467
4013.35
... More
24 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per directions of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)
19
86273
4540.7
... More
25 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987,Non combustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
70
118331
1690.45
... More
26 Providing and fixing manual chain operated roller blinds consisting of 100% Polyester fabric, fabric thickness 0.50 mm, fabric weight = 270 gsm ± 5%, fabric width 230 cms, tearing strength 4.5 kgf warp, bursting strength 34 kgf, colour fastness to light 5 to 6 grade in position of standard quality and approved shade/colour including necessary accessories, MS clamps, screws and drilling etc. as required all complete as per the directions of Engineer-in-charge.
35
50513
1443.25
... More
27 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including fixing on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately).18 mm thick commercial ply conforming to IS : 303 BWR type
19
40839
2149.44
... More
28 Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing top, bottom & wall side SS (Grade 304) connectors for fixing arrangements and making necessary holes for fixing required fittings etc. all complete as per the directions of Engineer-in-charge.
87
395315
4543.86
... More
29 Providing and fixing glass film of approved design and make on the glass surface all complete as per the directions of Engineer in Charge.
35
29400
840
... More
30 Providing and fixing 32 mm dia and 900 mm long drushed SS 304 grade with SSS finish pull handles with long bolt and cap for fixing from outside etc. as per approved design. All complete as per the directions of Engineer-in-charge.
9
20809
2312.19
... More
31 Providing and fixing of Stainless Steel glass to glass patch lock with key outside & knob inside in existing toughened glass door etc. all complete as per the directions of engineer-in-charge.
9
28691
3187.9
... More
32 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I. anchor fasteners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded).
15
26865
1791.05
... More
33 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for separately).
8
77888
9736.05
... More
34 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 sqm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/ certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x 2200 mm (w x h) or 2.42 sqm.
9
359962
39995.8
... More
35 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
2
14291
7145.9
... More
36 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
5
12818
2563.75
... More
37 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge.
17
39773
2339.6
... More
38 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
4
907
226.75
... More
39 Providing and fixing stainless steel soft closing spring hinges at 8 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
8
1814
226.75
... More
40 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
5
3748
749.7
... More
41 Providing and fixing readymade 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
13
5508
423.7
... More
42 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.
22
845
38.45
... More
43 Providing and fixing Stainless Steel finish 304 grade G profile channel for handle etc. complete as per directions of Engineer- in-charge.
5
13130
2626.04
... More
44 Supplying and placing in position main table with overall size of table 2100 x 2250 x 750mm.
The main table shall be of size 2100 x 1050 x 750mm.
The side unit shall be 1200 x 500 x 750mm.having following specifications
The table is made of 25 mm thick MDF – one side pre-laminated board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Finish - Tobacco Ash, Black Ink
4
437048
109262
... More
45 Supplying and placing in position The Back Unit shall be of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick MDF – one side pre-laminated board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Finish - Tobacco Ash, Black Ink
4
310864
77716
... More
46 Supplying and placing in position main table with overall size of table 1650 x 1950 x 750mm. The main table shall be of size 1650 x 750 x 750mm. The side unit shall be 1200 x 500 x 750mm. having following specifications , The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Finish - Tiepolo PC + Frosty White
3
311784
103928
... More
47 Supplying and placing in position High Back Main Chair having following specifications: The cushioned seat assembly shall consists of seat outer (material-30% glass fiber nylon) and upholstered seat inner (material-polypropylene) with moulded polyurethane foam and polyster fabric. The net back should made up of back outer (material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height (6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism shall be Active BioSynchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continuous lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine (material-glass fiber filled nylon) which is fixed to Aluminium back spine. The neckrest assembly consists of upholstered neckrest inner (material-poly propylene) with moulded polyurethane foam and polyster fabric. Upholstered inner shall be fixed to neck rest cover. Neckrest shall be fixed to back assembly through neckrest spline. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 109.3 to max 124.4 cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm.
7
176050
25150
... More
48 Supplying and placing in position Mid Back Visitor chair having following specifications: The cushioned seat assembly shall consists of seat outer (material-30% glass fiber nylon) and upholstered seat inner (material-polypropylene) with moulded polyurethane foam and polyster fabric. The net back should made up of back outer (material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth (6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism shall be Active Bio Synchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continuous lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99 cm. Seat height - 49 cm. Dimensions tolerance / variations shall be within +/- 1 cm.
14
325220
23230
... More
49 Supplying and placing in position Mid back Chair having following specifications :SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal
13
175500
13500
... More
50 Supplying and placing in position Glassdoor Almirah having following specifications: Overall Dimensions of Almirah shall be 900mm (W)x450mm (D)x1830mm (H). The top shall be Metal top (1 mm add in unit height).The Rigid Knock Down Construction, Back Sides and Door shall be made from 0.7 mm high yield strength CRCA, rest in 0.8 mm CRCA. CRCA - 'D' Grade as per IS-513. Sliding door arrangement shall have sliding door with top hanging arrangement to prevent derailmen. Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise. Almirah shall have 08 mm thick glass door for visibility of the content. Locking shall be 5 lever cam lock for safe locking. Handle shall be plastic flush & recessed handle. Shelving shall have Height wise adjustable shelf mounting. Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum. Almirah - 8 shall have 4 no. of adjustable full shelves. Accessories optional shall be cradle with pipes for hanging godrej instadex files. Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns. For Almirah 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm.
9
316188
35132
... More
51 Supplying and placing in position sofa 2 Seater of Dimensions 1460 x 945 x 850. SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette.BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric.UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. (W) 206.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm. Product shall be meeting the minimum desired specifications. The above furniture should be as per specification and sample approved by Engineer-in-charge as per image.
4
154936
38734
... More
52 Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
5
148590
29718
... More
53 Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
1
47416
47416
... More
54 Supplying and placing in position modular workstations system of size 1200mm (W) X 600mm (D) x 750 having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions
2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. ------------- Pedestal having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consists of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction & Material of Drawer Unit :Welded Assembled of 0.8mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2mm thick CRCA Top Stiffene, Bottom stiffener, Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking:10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism. Top Panel : 0.8mm thick Metal Straight Edge Top. Castors : Swiveling non-lockable 4Nos Castors mounted below the body shell. The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10)
9
489033
54337
... More
55 Supplying and placing in position modular workstations system of size 1500mm (W1) X 1500mm (W2) X 600mm (D) x 750 having following specifications. The product should be complete and as per approved sample and as per the direction of Engineer-In-charge. Main Panels Construction (Front and End panel of each cluster) - Main Partition panel having 4 horizontal blocks and consists of Vertical extrusions 2Nos and Horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel shall have Bottom frame fabricated for 52.4mm panel comprises of 2 nos. L-channels made of 2mm thick CRCA (Cold Rolled, Cold Aneeled) steel (IS: 513), formed plates
of 3mm thick Hot Rolled steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together. The complete bottom frame shall be powder coated with an average of 50-60 microns thickness of epoxy powder coating. The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with 2Nos Legs of height 120mm are fixed at the bottom frame of the panel. ----- Pedestal having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consists of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction & Material of Drawer Unit :Welded Assembled of 0.8mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2mm thick CRCA Top Stiffene, Bottom stiffener, Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking:10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism. Top Panel : 0.8mm thick Metal Straight Edge Top. Castors : Swiveling non-lockable 4Nos Castors mounted below the body shell. The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The product should be complete and as per approved sample and as per the direction of Engineer-In-charge.
4
334216
83554
... More
56 Supplying and placing in position Center Table having following specifications:Glass shall be of minimum thickness 10mm black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.
4
60224
15056
... More
57 Supplying and placing in position Corner Table having following specifications: Glass shall be of minimum thickness 10mm black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.
3
30012
10004
... More
58 Supplying and placing in position Optimizer/Compactors having following specifications: 1 bay 2TM Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 1200mm(W)x400mm(D)x2083mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513.Each body shall have a main unit plus add on units (1,2,3,4,5). Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns.Shelf construction made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD.Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame CRCA sheet 2 mmthk conforming to IS:513. The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling 'C' type plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. y. Each movable body also has an understructure with 4 nos. of antifriction ball bearings for rolling on channels. ---------------------- Label Holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 915mm(W) x 762mm(D) x 2180mm(H).
5
1186125
237225
... More
59 Deduct on account of issue of aluminium section window etc. to the contractor as buy-back material.
490
-93590
191
... More
60 Deduct on account of issue of dismantled wooden flush door etc. to the contractor as buy-back material.
4
-1600
400
... More
B: ELECTRICAL WORKS SH-01 (WIRING AND ACCESSORIES)
61 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
a) Group C
66
96822
1467
... More
62 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
a) Group C
108
92664
858
... More
63 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin , 15/16 Amps modular socket outlet and 15/16 Amps modular switch , connection etc . as required .
40
23440
586
... More
64 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
550
183700
334
... More
65 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.
a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
140
38500
275
... More
b) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
100
100500
1005
... More
66 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required ( For computer power in Furniture )
a) 3 x 4 sqmm
60
12360
206
... More
67 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) 5/6 A switch
20
2060
103
... More
b) 3 pin 5/6 A socket outlet
60
7320
122
... More
68 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
a) 8 Module
20
4220
211
... More
69 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
a) 8 way (4 + 24), Double door
4
23868
5967
... More
70 Supplying and fixing 5 amps to 32 amps, rating, 240/415 volts, 'C' Curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
a) Single Pole
96
24576
256
... More
71 Supplying and fixing TPN MCB 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
4
11778
2944.54
... More
SH-02 (LIGHT / FAN FIXTURES)
72 Supply, Installation, Testing and Commissioning of 33W recess mounting LED linear light 1200 mm long and 50 mm wide made of PDC Aluminium with glare free opal diffuser, IP20 environmental protection, having CCT 6500K in cool day light colour complete including making connections etc. complete as required.
33
386394
11708.93
... More
73 SITC of minimum 8 watt Aluminium extruded energy efficient round recessed LED Down light fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination with complete with all standard accessories including drivers etc. complete as required.
114
135323
1187.05
... More
74 SITC of minimum 5 watt per mtr energy efficient LED Cove light fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination complete with all standard accessories including drivers etc. complete as required
100
181606
1816.06
... More
75 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
21
57330
2730
... More
SH- 03 : (AIR CONDITIONING)
76 SupplyInstallation,Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating,having all hermetically sealed inverter type Scroll Compressor(s),minimum two compressors for above 14HP modules, microprocessor based Controller,top discharge type condensing unit(s),with R410A Refrigerant,vibration isolators,with suitable foundation etc. complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.The unit shall be suitable to work on 400V+/-10%,3Phase,50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required.The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .(ODU Unit should be anti corrosive coated from factory)
a) 34 Hp
34
558110
16415
... More
77 Supply,installation,testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter,fan section with low noise fan/dynamically balanced blower,multispeed motor,coil section with DX Copper coil,electronic expansion valve,outer cabinet,drain pump,grill,necessary supports,vibration isolation,cordless remote control etc.,suitable for operation on single phase230V±10%,50Hz AC supply,complete,as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will be at airinlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
a) 1.6 TR
3
90612
30204
... More
b) 2.0 TR
1
30801
30801
... More
c) 2.4 TR
6
188718
31453
... More
d) 2.8 TR
1
32015
32015
... More
e) 4 TR
1
33981
33981
... More
78 Supply,Installation,testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,complete withfittings,with suitable adjustable ring type hanger supports,jointing/brazing including accessories,insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometricnitrile rubbe rtubular sleeves sections of specified thickness as given below for Suction and Liquid lines,all accessories as per specifications etc. as required :
a) 38.1 mm O.D. (Hard drawn)with tube thickness 1.62mm with 19 mm thick insulation
25
31625
1265
... More
b) 34.9 mm O.D. (Hard drawn)with tube thickness 1.62mm with 19 mm thick insulation
20
24600
1230
... More
c) 28.58 mm O.D. (Hard drawn)with tube thickness 1.2mm with 19 mm thick insulation
35
38780
1108
... More
d) 22.2 mm O.D. (Hard drawn)with tube thickness 1.2mm with 19 mm thick insulation
30
25950
865
... More
e) 19 mm O.D. (Hard drawn)with tube thickness 1.2mm with 19 mm thick insulation
35
24745
707
... More
f) 15.86 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
45
26460
588
... More
g) 12.7 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
45
20970
466
... More
h) 9.5 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
35
11585
331
... More
79 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete and duly insulated with 9 mm thick closed cell nitrile rubber insulation as per direction of Engineer in Charge.
a) 25 mm nominal dia Pipes
150
61282
408.55
... More
b) 32 mm nominal dia Pipes
40
20038
500.95
... More
80 Supply Installation Testing and Commissioning of control cum transmission wiring of minimum 2C x 0.75 sqmm with copper sheilded cable between indoor and outdoor units as per OEM recommendation and upto the satisfaction of engineer in-charge at site.
300
62850
209.5
... More
81 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
a) 25 mm
820
118900
145
... More
82 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
250
17500
70
... More
83 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
a) 300 mm width X 50 mm depth X 1.6 mm thickness
20
19260
963
... More
84 Cutting holes of required size in brick masonry wall for passing of copper pipes, Drain pipes, cable removing of false ceiling and re-fixing/placing back if required etc. and making good the same etc. complete as per direction of Engineer-in-charge.(The hole shall be made by core cutter)
12
3600
300
... More
85 Supply Installation Testing and Commissioning of Refnets/ Y-Joints/ T-Joints as per OEM recommendation and upto the satisfaction of engineer in-charge at site.
24
156000
6500
... More
86 Supply of XLPE insulated Copper conductor, armoured 1.1 KV grade cable of following size complete as required.
a) 4 C X 50 Sq. mm (Aluminium Armoured)
25
17306
692.25
... More
b) 4C x 16 Sq mm(Copper Armoured)
50
79599
1591.98
... More
c) 4C X 10 Sq mm(Copper Armoured)
50
51871
1037.43
... More
d) 3C x 1.5sqmm(Copper Armoured)
300
55173
183.91
... More
87 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
150
6750
45
... More
88 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
250
13750
55
... More
b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
25
3250
130
... More
89 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a) 4 X 10 sq. mm (25mm)
2
538
269
... More
b) 4 X 16 sq. mm (28mm)
4
1236
309
... More
c) 4 X 50 sq. mm (35mm)
2
836
418
... More
90 Supplying, installation, testing & commissioning of cubical outdoor type electrical panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick i /c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 200 Amp capacity four strip aluminium alloy bus bars of high conductivity, bottom base channel of MS section not less than 5 mm thick, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq. mm. (CPRI Approved) Incoming 200 A 4 pole MCCB- 36 KA Digital Voltmeter 0-500 V with selector switch Digital Ammeter of suitable range and selector switch LED phase Indicating Light - 1 Set of 3 Nos (RYB) Outgoing 40 /63 Amp TPN MCCB --- 5 Nos for VRV/ VRF ODUs & IDU DB 25A 48 MCB - 6 Nos.
1
350000
350000
... More
91 Comprehensive Annual maintenance of VRV/VRF Air conditioning system provided and installed under this contract with all parts/components i.e compressor,gas charging,fan motor etc(one year free defect liability period and thereafter paid) a) For 1st Year (During defect liability period)
34
-
-
... More
b) For 2nd Year
34
95200
2800
... More
c) For 3rd Year
34
99960
2940
... More
d) For 4th Year
34
104958
3087
... More
e) For 5th Year
34
110160
3240
... More
f) For 6th Year
34
115668
3402
... More
SH- 04 : (NETWORKING)
92 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed steel / PVC Conduit as required. 1 Run of Cable (Make:- Commscope Systimax Only)
600
34200
57
... More
93 Providing and fixing 24 port loaded Straight patch panel of height 1U in the existing data end rack including making connections, channel labelling etc. complete as required.
1
11954
11954.99
... More
94 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) RJ 45 Information Outlet
20
21141
1057.05
... More
95 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
a) 1 or 2 Module
20
2660
133
... More
96 Providing and fixing Stranded Low smoke Halogen Cordage Unshielded Cat 6 Modular Patch cord of length 1 mtr with plug insertion life not less than 750 times and minimum Plug Retention force of 133N i/c making connections etc. complete as required.
20
17673
883.65
... More
97 Providing and fixing Stranded Low smoke Halogen Cordage Unshielded Cat 6 Modular Patch cord of length 2 mtr with plug insertion life not less than 750 times and minimum Plug Retention force of 133N i/c making connections etc. complete as required.
20
23615
1180.77
... More
98 SITC of 15U Floor/Wall Mount Network Rack with accessories (Make:- Rittal / APW / Emerson )
1
19182
19182.31
... More
99 Supplying and fixing of UPVC trunking of size 100 x 50 along with accessories on surface complete as required.
5
4920
984
... More
SH- 05 : (EARTHING)
100 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
14944
7472
... More
101 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
80
19520
244
... More
102 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
8
5648
706
... More
SH:- 06: FIRE ALARM SYSTEM
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all
connections etc. as required.
26
29978
1153
... More
104 Supplying, installation, testing & commissioning of addressable manual call point complete as required.
6
23226
3871
... More
105 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
280
48440
173
... More
SH:- 07: TELEPHONE
106 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
a) 2 Pair
380
14440
38
... More
107 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
a) Telephone socket outlet
13
1417
109
... More
108 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
a) 1 or 2 Module (75mmX75mm)
13
3874
298
... More
109 Dismantling & Buy Back of old & defective following items from NSUT as per required. (Contractor / Agency should be ensure that disposal of the old / defective wastage material should be disposed off through the authorized recycler registered under Delhi Pollution Central Board / Central Pollution Control Board. Contractor/ Agency should also submit 'Certificate of Destruction').
a) Ceiling Fan
21
-10500
500
... More
b) Light Fitting
33
-3300
100
... More
Sub Head C. Conversion of Green Room into Committee Room at NSUT Main Campus. 1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
1.1 Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm
10.1
47261
4679.35
... More
2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
2.1 Second class teak wood
0.1
13157
131576.95
... More
3 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
3.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
7.72
23824
3086.1
... More
4 Providing and fixing 32 mm dia and 900 mm long drushed steel finish pull handles with long bolt and cap for fixing from outside as per design approved, all complete as per the directions of Engineer-in-charge.
2
6061
3030.96
... More
5 Providing and fixing Stainless Steel closed body 55mm SS mortise lock without handle as per the approved design, all complete as per the directions of Engineer-in-charge.
2
3838
1919.12
... More
6 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with Second class teak wood
195
816650
4187.95
... More
7 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
113
145368
1286.45
... More
8 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge
8.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
5.7
11440
2007.1
... More
9 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
5.7
1250
219.35
... More
10 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area beyond 3 sq. metres
6
934
155.75
... More
11 Dismantling wooden boardings in lining of walls and partitions, and wooden flooring excluding supporting members but including stacking within 50 metres lead, Thickness above 10 mm up to 25 mm
256
16422
64.15
... More
12 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
113
5254
46.5
... More
13 Credit to the work for dismantled material under buy back scheme
13.1 Deduct on account of issue of existing false ceiling system to the contractor as buy-back material.
113
-33900
300
... More
13.2 Deduct on account of issue of old aluminium sections etc. to the contractor as buy-back material.
60
-11460
191
... More
13.3 Wood scrap
512
-2560
5
... More
14 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
9
65249
7249.9
... More
15 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.)
9
70184
7798.3
... More
16 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete
18
72240
4013.35
... More
17 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
17.1 Upto 5mm depth and 5 mm width
90
7672
85.25
... More
18 Providing and Fixing of Acoustical Wall Panel (Armstrong / Gyptech / Himalaya) with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent Fire retardant fabric of RSWM/ Nextgen as per the approved shade. The fibre glass substrate shall have a recycle content of 85%. The panel shall be classified for Fire Class A. The Acoustical Wall Panel shall be of sizes 600x1200mm and shall achieve an NRC 0.80 (Average value of Absorption Co-efficient ) to be fixed to wall on a existing GI framework (payable in item3) and using Wall panel Impalers and adhesives wherever required. The Impalers shall be fixed to the ply using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained. Specification and execution of item at all heights and as per approved drawings and directions of Engineer-in-charge
120
402412
3353.44
... More
19 Providing and Fixing Wood slatted panel perforated panels of width 128-192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade . The boards shall have a special perforation pattern where the reverse surface has a fluted perforation with consecutive 2-3mm wide groove followed by 13_14 mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece hot pressed to achieve NRC of 0.6. and Humidity Resistance (RH) of 70% .The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. The panel shall be mounted by tongue and groove mechanism using inside clip on GI extruded keel . The supply shall be backed by a Manufacturing Test Certificate . The panel to be fixed over the existing GI framework payable in item 4. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. Finish off the edges using wooden moulding of matching colour all complete. Installation should be carried out as per Manufacturer recommended procedure. The work to be done complete as per drawings and specifications, and directions of engineer in charge.
60
224022
3733.7
... More
20 Providing and fixing GI Gyp steel ultra frame work for wall panelling as per design drawing consisting of floor channel of size 50x32x32 x0.5mm thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw. Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The framework to be filled with 50mm 1000GSM non-woven thermal bonded polyester wadding ( Make Dupont/ nowofill/ Gyptech) held in position with 18 mm GI checken mesh of 24SWG with drywall screws and oversize washers wherever required as per design drawings with drywall philips screws and angle cleats 27x37x25x1.6 mm as required. The frame to be fixed to the walls by means of angle holdfasts or cleats of required size complete with expandable anchor fasteners of 65x10mm dia fixed on each vertical member @1000mm C/C etc. as required all complete as per the directions of Engineer-in-Charge.
180
214740
1193
... More
21 Providing and fixing zebra sheer-dimout blinds of approved make, color and shade complete as per the direction of engineer-in-charge.
20
113350
5667.5
... More
22 Providing and fixing of stainless steel Grade 304 tower bolts as per the approved design all complete as per the directions of Engineer-in-charge: 600mm long
4
5083
1270.98
... More
23 Providing and fixing of stainless steel Grade 304 tower bolts as per the approved design all complete as per the directions of Engineer-in-charge: 250mm long
4
2190
547.6
... More
24 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete
2
2051
1025.65
... More
25 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
19
21974
1156.55
... More
26 SH- 02 (FURNITURE WORKS)
Modular Conference Table - 25 Seater Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above.Under structure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns.Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cut-out on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop, complete as per manufacturer's specifications and direction of Engineer - in- charge.
1
328773
328773.96
... More
27 High Back Conference Chair La Sede Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resilience polyurethane foam of Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polyurethane, and shall be upholstered with pure leather and mounted on to a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest height shall be adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort ,Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/back tilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal, complete as per manufacturer's specifications and direction of Engineer - in- charge.
1
48565
48565.26
... More
28 Mid Back Conference Chair Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foam of Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polyurethane, and shall be upholstered with pure leather and mounted on to a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest height shall be adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/back tilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal, complete as per manufacturer's specifications and direction of Engineer - in- charge.
28
1186334
42369.08
... More
29 Visitor Conference Chair Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resilience polyurethane foam of Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polyurethane, and shall be upholstered with pure leather and mounted on to a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest height shall be adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/back tilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal, complete as per manufacturer's specifications and direction of Engineer - in- charge.
30
1037963
34598.78
... More
30 Folding Table Providing and Placing in place of canteen table.The overall dimensions of the table shall be 1200 x 600 x 750mm.Table top shall be made from 25mm thick MDF OSR board with membrane coating on top side.Legs are made by welding the combination of MS ERW round tube of diameter 63.5mm x 2mm thick. Flanges of 1.6mm thick CRCA and 1.2mm thick. Inside plate are made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top folds upside at offset centre pivot provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy polyester powder coated min. 40 microns. Table top connected with spring loaded mechanism with membranella handle made of sandwich tubes of MS ERW 1.2mm thick and 1.6mm thick tubes. Coated with epoxy polyester powder coated min. 40 microns . Legs are provided with casters of 65mm diameter lockable type for ease of movement and can be locked when required at any position, complete as per manufacturer's specifications and direction of Engineer - in- charge.
1
23798
23798.24
... More
31 AV Storage Console Providing and fixing in position Wooden Console for AV equipment of required sizes as per the following specifications:
The framework or carcass including top, bottom, sides, partitions, shelves shall be made with 18mm thick ply; back shall be made with 6mm thick ply; perforated shutter fronts shall be made with 19mm thick MDF finished with duco paint and 0.8 mm thick laminate shall be fixed on all unexposed inner faces: including anti-termite treatments, wooden lipping, suitable locking arrangement, with all other types of necessary fittings etc. complete as per design. Top shall be fixed with 15mm Italian Marble stone. Providing and fixing aluminium profile shutter handles of approved make as per approved drawing/design and the directions of the Engineer-In-Charge.
1
53100
53100
... More
ELECTRICAL WORK SH-03 (WIRING AND ACCESSORIES) 32 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
32.1 Group C
25
36675
1467
... More
33 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
33.1 Group C
35
30030
858
... More
34 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin , 15/16 Amps modular socket outlet and 15/16 Amps modular switch , connection etc . as required .
10
5860
586
... More
35 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
150
50100
334
... More
36 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
130
69810
537
... More
37 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.
37.1 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
50
13750
275
... More
38 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required ( For computer power in Furniture )
38.1 3 x 4 sqmm
90
18540
206
... More
38.2 6 x 4 sq. Mm
20
7920
396
... More
39 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
39.1 5/6 A switch
99
10197
103
... More
39.2 3 pin 5/6 A socket outlet
99
12078
122
... More
40 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
40.1 3 Module
33
4983
151
... More
40.2 6 Module
33
6006
182
... More
41 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
41.1 8 way (4 + 24), Double door
1
5967
5967
... More
42 Supplying and fixing 5 amps to 32 amps, rating, 240/415 volts, 'C' Curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
42.1 Single Pole
24
6144
256
... More
43 Supplying and fixing TPN MCB 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
1
2942
2942.42
... More
44 Supplying and fixing of UPVC trunking of size 100 x 50 along with accessories on surface complete as required.
5
4920
984
... More
45 Supply and installation of corrosion proof GI (hot dip galvanized) raceways made out of 1.6mm thick sheet steel, standard length 2.5 meters, 1/2/3 compartments top and bottom double folded and spot welded together to give required rigidity and prevent seepage of concrete or screed water complete with cover jointing sleeves and other accessories.
45.1 225x38x1.6x2 -3Comp 2.5Mtr
50
247369
4947.39
... More
46 Supply and Installation of Pre-galvanised sheet steel Junction boxes of following sizes having one piece base frame design, trap covers made up of 2mm thick pre-galvanised sheet steel having 8 mm recess for installation of Tiles, having Stainless steel screws for trap covers, brass terminals for earth connection and load bearing capacity of upto 3.6 metric ton.(HSN Item Code ESB 250 ML)
46.1 250 x 250 x 60 mm
12
136292
11357.7
... More
47 SITC of minimum 30 watt Aluminium extruded energy efficient suspended LED Linear light minimum 50 mm wide fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination compatible with approved DALI dimming controller complete with all standard accessories such as end plates Transparent cable including drivers etc. complete as required
5
58518
11703.63
... More
48 SITC of minimum 15 watt Aluminium extruded energy efficient round recessed LED Down light fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination compatible with approved DALI dimming controller complete with all standard accessories including drivers etc. complete as required.
34
136080
4002.38
... More
49 SITC of minimum 5 watt per mtr energy efficient LED Cove light fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination complete with all standard accessories including drivers etc. complete as required
100
42017
420.17
... More
50 SITC of minimum 7 watt energy efficient recessed LED Spot light fitting having system efficacy minimum 100 lumen/watt LM79, colour temp 6500 deg K, having symmetric glare free illumination complete with all standard accessories including drivers etc. complete as required
1
1096
1096.18
... More
SH:- 04 : AIR CONDITIONING
51 Supply Installation Testing and Commissioning of minimum capacity in CFM and Tr 8.5 and 3400 Inverter Ducted unit having low power consumption and higher comfort. The unit should comprise of ceiling suspended indoor unit, outdoor unit and touch screen corded remote controller. The unit shall work upto ambient temperature of 52 Deg C. The quote price shall be inclsive of outdoor stand and refrigerant charging at site.
51.1 8.5 Tr Inverter Ductable Unit
2
589789
294894.7
... More
52 Supply,Installation,testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,complete withfittings,with suitable adjustable ring type hanger supports,jointing/brazing including accessories,insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometricnitrile rubbe rtubular sleeves sections of specified thickness as given below for Suction and Liquid lines,all accessories as per specifications etc. as required :
52.1 28.58 mm O.D. (Hard drawn)with tube thickness 1.2mm with 19 mm thick insulation
30
33240
1108
... More
52.2 12.7 mm O.D. (Soft drawn)with tube thickness 1.2mm with 19 mm thick insulation
30
13980
466
... More
53 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints and also inclusive of thermal insulation of nitrile rubber having a thickness of minimum 9 mm complete as per direction of Engineer in Charge.
53.1 32 mm nominal dia Pipes
28
14026
500.95
... More
53.2 40 mm nominal dia Pipes
12
8092
674.35
... More
54 Supply, installation, balancing and commissioning fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 54.1 Thickness 0.63 mm sheet
60
63480
1058
... More
54.2 Thickness 0.80 mm sheet
20
24580
1229
... More
55 Supply and fixing of acoustic lining of supply air duct with 25 mm thick resin bonded glass wool having density of 32kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stickpins, CPRX compound etc. complete as required and as per specifications
20
14160
708
... More
56 Supplying and fixing of following thickness duly laminated
aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.
56.1 19 mm thick
60
45240
754
... More
57 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
2
18210
9105
... More
58 Supplying & fixing of powder coated extruded aluminium Return Air Grills but without volume control dampers complete as required
2
11820
5910
... More
59 Supply Installation Testing and Commissioning fire retardant Canvas Connection for Indoor unit.
2
7031
3515.74
... More
60 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.
80
3360
42
... More
61 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
61.1 150 mm width X 50 mm depth X 1.6 mm thickness
30
21480
716
... More
62 Supply Installation Testing and Commissioning of control cum transmission wiring of copper in suitable PVC conduits between indoor and outdoor units size as per OEM recommendation (should be shielded cable in PVC conduits)
40
8800
220
... More
63 Supplying, installation, testing & commissioning of cubical outdoor type electrical panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick i /c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 200 Amp capacity four strip aluminium alloy bus bars of high conductivity, bottom base channel of MS section not less than 5 mm thick, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq. mm. (CPRI Approved) Incoming 100 A 4 pole MCCB- 36 KA Digital Voltmeter 0-500 V with selector switch Digital Ammeter of suitable range and selector switch LED phase Indicating Light - 1 Set of 3 Nos (RYB) Outgoing 32 /40 Amp TPN MCCB --- 2 Nos for VRV/ VRF ODUs
1
227311
227311.55
... More
64 Supply of one number of following sizes of PVC Insulated/ PVC sheathed XLPE power cable complete as per the directions of engineer-in-charge.
64.1 4 C X 50 Sq. mm (Aluminium Armoured)
20
14674
733.74
... More
64.2 4 C x 6 Sqmm (Copper Armoured)
50
37159
743.18
... More
64.3 3 C x 2.5 Sqmm (Copper Armoured)
50
14854
297.08
... More
65 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
65.1 Upto 35 sq. mm (clamped with 1mm thick saddle)
50
2250
45
... More
65.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
920
92
... More
66 Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
66.1 Upto 35 sq. mm (clamped with 1mm thick saddle)
50
2750
55
... More
66.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
1300
130
... More
67 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
67.1 4 X 6 sq. mm (25mm)
2
538
269
... More
67.2 4 X 50 sq. mm (35mm)
2
836
418
... More
68 Comprehensive Annual maintenance of Inverter Ductable Air conditioning system provided and installed under this contract with all parts/components i.e compressor, gas charging, fan motor etc(one year free defect liability period and thereafter paid) 68.1 For 1st Year (During defect liability period)
1
-
-
... More
68.2 For 2nd Year
1
33745
33745.99
... More
68.3 For 3rd Year
1
42182
42182.48
... More
68.4 For 4th Year
1
50618
50618.98
... More
68.5 For 5th Year
1
59055
59055.48
... More
SH:- 05: AV SYSTEM 69 SITC of UHD 4K 86 inches Display having Resolution 3840 X 2160, IPS Panel type, brightness 500 cd/㎡ , BIS certified remotely controlled etc. complete with wall mount bracket and other accessories having following specification and inputs etc.-
a. Contrast Ratio – 1100:1 or better b. Aspect Ratio - 16:9 c.HDMI Input port – 3 Nos e. VGA In- 1 No. f. Audio In - 1 No. g. USB- USB 3.0 X 2 h. HDMI out- 1 No. i. RJ 45 and RS 232 In- Yes. j. Duty Cycle - 24x7
1
853640
853640.51
... More
70 SITC of UHD 4K 75" 4K UHD(3840 X 2160) Slim DLED display, 500 Cd/m2, Android 9.0, Quad-Core ARM Cortex-A55 CPU, ARM Mali-G31 MP2 GPU, 2GB DDR4 memory, 16GB storage, HDMI 2.0 X 4, DP 1.2a X 1, USB A 3.0 x 1, USB-A 2.0 x 1 USB-A 2.0 (Internal) x1, USB-C 3.0 x 1, HDMI Out x 1, RJ45 X 1, RS232 X 1, Audio IN X1, Audio Out x 1, Optic SPDIF, RJ12 x 1, 20W in built speaker, 24/7 operation, Built in Wi-Fi & Bluetooth, HTML5 CMS Launcher, Android CMS Launcher, Scheduler, USB-Autoplay, Auto-Launch, HDMI-CEC, HDMI-Wakeup, OSD and UI Rotation, Video Rotation, No Signal Power Off, Pixel shift, Videowall support, Real Time Clock with mount
2
1172848
586424.43
... More
71 SITC of swivel wall mount for 86/75 inches display
3
64723
21574.54
... More
72 SITC of 32" HD Ready resolution Android LED display with built in 2.4 Ghz Wi-Fi, 1 Ghz Built in Quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wi-Fi and Chrome cast, HDMI CEC, HDMI ARC, Built-in Bluetooth Ver.4, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone, Display Should be capable to run boot up Web Browser in Offline/Online Mode, Display Should be capable to run Photos/Videos in online/offline mode during idle mode with stand
1
58642
58642.44
... More
73 Supply , Installation , Testing & Commissioning of Video Conference System consisting of HD 1080p, camera with 12X Optical Zoom, minimum 3 site connections in continuous presence and should be upgradable without change of Hardware, Multicast, Dual Network, Omni directional boundary layer microphone, In built recording capabilities, System should support video conferencing end point device must have capabilities to join any web conference with the peripherals of video conference unit and seamless integration of Web conference with video conferencing end point
1
961252
961252.42
... More
74 SITC of HDMI 4K/60 4:4:4 matrix switcher. All input and output should support 4K/60 4:4:4 resolution. Switcher which has atleast eight inputs, Video Input: 8x HDMI which support video of resolution upto 4K with HDR 10, HDR10+ support. Output: 8x HDMI which support video upto 4K with HDR10+, Built in audio de-embedding capabilities with 2x Stereo outputs, EDID Management, HDCP Management upto 2.3, Should have an ethernet management for getting controlled through controller.
1
513877
513877.08
... More
75 Supply, installation, testing and commissioning of Tabletop 7" Touch Screen with docking station,, Should support minimum resolution of 1280 x 800 WXGA display or better. with Brightness 350 nits (cd/m²) or better contrast 850:1 or better, Should be Capacitive touch screen display. Should Support H.265, H.264, or MJPEG streaming video display or better. Should support Built-in Bluetooth communication beacon. Should support Wi-Fi Network connectivity. Should be capable of powering via POE+ power sourcing network switch.
1
284143
284143.8
... More
76 SITC Of wireless presentation devices supports video resolution upto 1080p ( Full HD) with HDMI output, Ethernet port, USB port for connecting keyboard and mouse, Supports windows laptops and MAC, as well as iOS, windows and android mobile operating system, display minimum 4 user screens through HDMI output, Supports DHCP, Audio output supports annotations and whiteboard feature
2
273261
136630.85
... More
77 SITC of cable manager with cable pass through for 1 HDMI, 1 VGA with Audio, 2 LAN and 1 AC power outlet
5
293212
58642.44
... More
78 A Wall Plate Transmitter which has atleast two Video Input: 1x HDMI, 1x VGA & Audio. Output: 1x RJ45 output which should be HDBaseT compatible which transmit signals upto 330 ft along with control signals. It should have atleast one USB port which supports USB HID compliant device. It should have the EDID Management, HDCP Management. Should be supplied with all the accessories and power supply as per the site requirement.
5
513877
102775.42
... More
79 Supply, installation, testing and commissioning of low profile surface mounted Twisted pair HDBaseT receiver. Should be an 4k60 4:4:4 HDBaseT receiver. Should support HDBaseT. Should support minimum UHD and 4K60 4:4:4 resolutions or better. Should support HDCP 2.2 or better. Should have built-in IR and RS-232 port for controlling the connected display or an external control port expander should be supplied. Should Support device control via CEC, IR, RS 232, and Ethernet. Should support cable length minimum 330 ft (100 m) for all resolutions up to UHD and 4K or better. Should be capable for powering via the central HDBaseT power supply unit. Should have flanges for mounting behind the display or additional mounting accessories should be supplied. The matrix switcher, Input and Output cards, Transmitter and receiver should be from the same OEM.
5
501785
100357.17
... More
80 Supply installation testing and commissioning of wireless handheld cardioid microphone having frequency response as 50 Hz to 15kHz, battery life of 10 hrs. or more Transmitter RF Output Power: LO power mode: 1 mW maximum HI power mode: 10 mW maximum, System Distortion:1 %, Dynamic Range:90dB
1
48364
48364.9
... More
81 SITC of 5 inches two way/ full range ceiling mounted speakers with Power handling 30W, effective frequency response 70 Hz to 25 KHz. Sensitivity (1W, 1 m)-90 db
8
91893
11486.66
... More
82 SITC of High Efficiency Class-D, Dual Channel Amplifier having following specifications : - Auto Sleep Function Built-in Limiter Circuit Dynamic Range - 116dBA Output Resistance - 43 mOhm Power Output (4 Ohms/8 Ohms/70V/100V) - 280W/245W/250W/240W Frequency Response +/- 0.1dB 20Hz – 20kHz Voltage Gain 32dB etc complete as required.
1
154767
154767.68
... More
83 SITC of Audio digital Signal processor Unit with minimum specification / features i.e. USB Audio Interface, Minimum 8Input Processing Unit with AEC Enable, Input Channel: Minimum 6 or more, 3 x Line Output or more, Frequency Response : 20 Hz to 20 kHz, THD: 0.1% or better, SNR : 90dB or better, Channel Separation : -80dB or less, USB audio interface for soft codec application, Digital Network Link Port for future expansion, IP / RS232 port for third-party control, with complete installation as per site requirement.
1
411101
411101.66
... More
84 SITC of Audio mixer 16-Channel Mixing Console Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo), 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX) High-grade effects: SPX with 24 programs 24-bit/192 kHz 2in /2out USB Audio functions +48V phantom power XLR balanced outputs.
1
64083
64083.49
... More
85 SITC of Flush Mount digital conference unit for Chairman with Microphone On/ Off Push button to activate/ deactivate the microphone “Request” LED Indicator for microphone Should Include detachable gooseneck microphone with length 40cm and above and have cardioid or better polar pattern Frequency response : should fall in audible range 30 Hz – 15 KHz etc. complete as required.
1
54410
54410.51
... More
86 SITC of Flush Mount digital conference unit with Microphone On/ Off Push button to activate/deactivate the microphone “Request” LED Indicator for microphone Should Include detachable gooseneck microphone with length 16” and above and have cardioid or better polar pattern Frequency response : should fall in audible range 50 Hz – 17 KHz Excellent RF Noise Immunity Should include 2 meters patch cord
20
991480
49574.02
... More
87 SITC of Frequency response : must fall in audible range 70 Hz- 16 KHz Total Harmonic Distortion : less than 0.1 % Should control upto 250 conferencing inputs without any software or accessories Analog In – Minimum 2 Analog Out – 4 or more LAN Ports – 4 or more TCP/IP port – 1 or more Should include power supply to power the required number of conference units Should be able to prevent one mishap from taking down your entire system using redundant loop cable topology/ring topology. Four different microphone operating modes should be supported: Automatic, First-In/First-On (FIFO), VOX (voice activated), and Manual Should include 20 meters patch cords
1
278098
278098.18
... More
88 SITC of A rack-mountable control system with a powerful 4 Series™ control engine and numerous integrated control ports., having features like 2 GB SDRAM and 8 GB flash memory, XPanel computer and web based control, High-speed USB 2.0 host port and rear panel memory card slot, the controller should be able to control variety of audio, video, lighting, motorized shades, thermostats, door locks, sensors, security systems, and other equipment. Onboard RS 232, IR/serial, relay, and Versiport I/O control ports enable direct integration with all types of third party equipment
1
266006
266006.96
... More
89 Supplying and laying all type of cables for healthy functioning of above system in one smart class room i.e. shielded twisted pair cable, HDMI patch cord, USB cable, audio cable, speaker cable 2 core 1.5 sqmm PVC insulated shielded cable all completed as per the directions of Engineer-incharge.
1
362736
362736.76
... More
90 SITC of 19" pre-wired audio-video equipment rack with front/rear door with caster wheels etc.
1
34459
34459.99
... More
91 Comprehensive maintenance including repair/ replacement of damaged item/part/system with all accessories, spare parts, software, hardware and other related equipments as required for smooth functioning of Audio Video system covered under item no. 38 to 59.
91.1 For 1st year (During defect liability period)
1
-
-
... More
91.2 For 2nd year
1
329946
329946.78
... More
91.3 For 3rd year
1
412433
412433.47
... More
91.4 For 4th year
1
494920
494920.16
... More
91.5 For 5th year
1
577406
577406.86
... More
SH: 06 BUYBACK ITEM
92 Dismantling & Buy Back of old & defective following items from NSUT as per required. 91.1 Tower Type AC(3.0 TR)
4
-20000
5000
... More
91.2 Light fiting
15
-2250
150
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements