Netaji Subhas Institute Of Technology Tender

3.2 150 mm

4 Providing, Instalation, testing & connissioning of Gun Metal body foot volve of Leader / Sant Make etc. as required. 4.1 100mm dia

5 Providing, Instalation, testing & connissioning of Gun Metal double flanged non return volve of following sizes complete with rubber gasket, GI bolts, nuts, washers etc. as required ( Make Sant / Leader) 5.1 100mm dia

6 Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 6.1 3 Cx 10 sqmm Cu flat cables for openwell submersible pump motors

7 Supplying and fixing of UPVC trunking of size 100 x 50 along with accessories on surface complete as required.

8 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

9 SITC of free standing floor mounted dust and vermin proof compartmentalised Indoor type 3 phase, 415 V ,50 HZ suitable for 300 Amp Al busbar capacity ,front openable,300 mm deep cubical panel made out of CRCA sheet, required hardware, duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Base frame should be of 50 mm x 50 mm x 6 mm MS angle iron with 300 mm long legs of 50 mm x 50 mm x 6 mm i/c interconnection ,testing etc as required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure, i/c p/f 2 nos. GI earth studs on both side with following accessories. (Including voltmeter-4set,ammeter-4set,indication lamp-12 set,CT-12 set,setector switch-8 set)( panel to be fabricated from CPRI approved fabricator)(Note : -The old starter panel is the property of contractor) (Contractor / Agency should be ensure that disposal of the old / defective wastage material should be disposed off through the autorised recycler registerd under Delhi Pollution Central Board / Central Pollution Control Board. Contractor/ Agency should also submit 'Certificate of Destruction').

10 Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 10.1 200A 36kA FP MCCB

10.2 100 A, 16 KA,TPMCCB

10.3 15 HP fully automatic star delta starter

10.4 Triple pole and neutral