National Security Guard Tender

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .Thescaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying rectified Glazed Ceramic anti skid floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) 1st quality in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required-Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing brass/batten angle holder including connection as redq

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,) din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator : 8 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with onnections, testing and commissioning etc. as required.-40 A

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal/coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size 3.5 x 120 mm²,including DWC HDPE pipe of suitable size directly in ground complete with connection, testing etc as required.

Supplying and fixing of 100 watt LED lumanaire white in colour make Philips/CG/Havells on existing wall brackett with complete connection as reqd

Supplying and fixing of 18 watt LED batten 4 feet long make CG/Havells/Philips with complete testing etc as reqd

Supply and fixing of 1200 mm sweep ceiling fan 230 V, 50 Hz. Complete with blades, electronic fan regulator (stepped type), canopy etc. of Bajaj/Usha/ Orient/Crompton including connection with 1.5 mm² FRLS PVC insulated, copper conductor, single core cable, earthing the regulator etc. as required.

Fabrication, supplying, installation, testing and commissioning of outdoor type cubical panel of made out of 16 SWG CRCA sheet, dust and vermine proof with front openable hinged door and canopy on top duly powder painted having 200 amps. aluminium bus bar duly sleeved with heat shrinkable sleeve, aluminium strips/copper flexible wire & thimbles of suitable capacity including connections, inter connections etc. complete as required (With minimum depth of panel is 350 mm). Following switchgears and accessories(Item no. 17 to 24) for the existing cuibcal panel board including onnections, inteconnection & earthing etc. complete as required.

Supply and fixing of 160 Amp, 36 KA 4 pole MCCB with Rotary Handle and Spreader Links (Make: ABB or equivalent approved model in L&T/Siemens) complete as required (suitable for item no.1)

Supply and fixing of 63 Amp, 25 KA TP MCCB with Rotary Handle and Spreader Links thermal release type (Make: ABB / L&T/Siemens/GE) complete as required (suitable for item no.1)

Supply and fixing of Digital Voltmeter (Make: Conzerv/AE/L&T) complete as required (suitable for item no.1)

Supply and fixing of Digital Ammeter (Make: Conzerv/AE/L&T) complete as required (suitable for item no.1)

Supply and fixing of Voltmeter Selector Switch (Make: Kaycee/Salzer/Rishab) complete as required (suitable for item no.1)

Supply and fixing of Ammeter Selector Switch (Make: Kaycee/Salzer/GE) complete as required (suitable for item no.1)

Supply and fixing of 200/5 Amp. CT's Cast Resin Type (Make: AE/Kappa /Rishab) complete as required (suitable for item no.1)

Supply and fixing of LED Indication Lights (Make: L&T/GE/Siemens) complete as required (suitable for item no.1)

Supplying and fixing of 45/50 watt LED type street light lumanaire white in colour make Philips/Wipro/CG/Halonix,this also include 2 meter length wall brakett made up of GI pipe 40mm dia,to be fixed with the use of clamps/Fastener/nut and bolts with complete connection as reqd

SITC of sewage monoblock Motar coupled with 15 HP pump make Crompton/ Kirloskar make, this include suitable size foundation and frame also it has 4" outlet and 4" inlet with complete in all respect as required as per direction of Engineer-in -Charge.