National Institute Of Public Finance And Policy Tender

15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixingtee, including cutting and threading the pipeetc. complete :50 to 80 mm nominal bore

Grading roof for water proofing treatment withCement concreter:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of themembrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal andtransverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Removing of tarfelt/APP and loose grading etc all complete as per direction of Engineer-in-charge

Extra for finishing top of roof course of water proofing treatment with broken pices of glazed tiles with bitumen of joints filled with cement mortar 1:3 (1cement: 3 C. sand) mixed with water proofing compound @ 2 % of mortar as per manufacture and specification etc complete as per direction of Engineer-in-charge..