National Institute Of Public Finance And Policy Tender

Providing and Fixing expandable fasteners of HILTI make only with threaded dia 10 mm with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work / CC / R.C.C. and making good etc. complete: 100mm long (S.S. Grade 304) the including cost of scaffolding at all heights. (Firm is required to submit the original bill against the purchase of Hilti make fastener and arrange the testing of strength of fasteners in the site).

Removing of mortar between two stones in the external face of building with the help of chisel and hammer and refilling the same with cement mortar 1:2, 1 Cement: 2 sand with water proofing compound (Dr. Fixit) & sealing of joints complete in all respect including cost of scaffolding at all heights and clamps. No extra payment will be made for removing and refilling of mortar between the external face of the stones.

Dismantling/Demolishing removing brick work plaster, wall / fixtures, flooring, electrical wiring, cabling, switch sockets, plumbing fixtures, pipes, to accommodate the proposed new layout and disposal of unserviceable material to a place permitted by the municipal authorities including making good any damages complete for Faculty flat and Office toilets

Plastering of walls in 12mm thick. smooth cement plaster on existing block masonry, RCC columns, RCC Walls, of any profile, in 1:4 cement mortar, (1unit- cement, 4unit- fine screened sand), incl. of hacking on column/wall, making surface wet before applying plaster and proper curing after plaster etc. complete. all plaster works will have provision of chicken mesh with more than 2" overlap between RCC member and wall so as to avoid cracks due to thermal expansion, chicken mesh to be also provided on all chased surfaces such as ,conduit chasing , pipe line chasing etc. and then chased area to be plastered. Cost to be inclusive of all including scaffolding at all heights.

Providing, laying, compacting and laying in position RCC of the 1:1.5:3 cement concrete with TOR steel reinforcement with stirrups of 8mm dia TOR steel at 200mm c/c , including 12mm cover, necessary shuttering, curing, compacting, bending of steel reinforcement etc Complete & all to be included in cost & quoted rate shall for all levels of floor & height for toilet, kitchen, pantry counter and for lintel of doors, strong room RCC walls, etc. in brick works

P/F 300x300/600x300 mm of Somany/NITCO/ HR JOHNSON / KAJARIA digital floor tiles (as per approval) - of following sizes and models in floors/skirting , tops laid in pidilite tiling adhesive and jointed with white cement slurry @ 3.3 kg/sq.m. including pointing in white cement mixed with matching pigments, laid in approved pattern as per detailed in drawing including curing, cleaning, material, labour, plant & machinery etc. complete as directed over the existing flooring with roof grout, tiles laid in proper line and level or laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand ). Basic cost of tile (project tile cost including taxes & discount is Rs.520 /sq.m. without transportation charges) FOR FLOORING AND SKIRTING IN TOILETS.

Providing and Laying tile dado of approved make, shade and pattern as approved by Architect, with epoxy grouting, making grooves using 2/ 3mm PVC spacers and epoxy grouted with tile grouted of matching shade of tile including cutting, grouting the joints with epoxy grout of endure or equivalent and pigment to match the shade of tile including cutting, etc. complete in all respects as per pattern and drawing. (a) With Tile (Basic rate of tiles Rs. 80/- Sq.ft, leaving taxes and freight and Loading un loading charges) for Toilet & kitchen highlighter on walls. Make: Kajaria/ Somany/ NITCO

Providing and Laying tile dado of approved make, shade and pattern as approved by Architect, with epoxy grouting, making grooves using 2/ 3mm PVC spacers and epoxy grouted with tile grouted of matching shade of tile including cutting, grouting the joints with epoxy grout of endure or equivalent and pigment to match the shade of tile including cutting, etc. complete in all respects as per pattern and drawing. (b) With Tile (Basic rate of tiles Rs. 60/- Sq.ft. leaving taxes and freight and Loading un loading charges) for Toilets & kitchen walls other than highlighter. Make: Kajaria/ Somany/ NITCO

Providing and laying polished granite stone in choice shade laid in floors and counter tops over 20mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) followed by laying and fixing with highly polymer single component adhesive of LATICRETE / BAL ENDURA or equivalent with minimum 6 mm thickness and jointed with white cement slurry mixed with matching pigment, including rubbing and polishing and curing etc. complete at all levels. (Sample of stones shall be got approved by Client ). (a) Granite Base cost : Rs.250 Sq.ft. leaving taxes and freight and loading un-loading charges (For Kitchen counter)

Providing and laying polished granite stone in choice shade laid in floors and counter tops over 20mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) followed by laying and fixing with highly polymer single component adhesive of LATICRETE / BAL ENDURA or equivalent with minimum 6 mm thickness and jointed with white cement slurry mixed with matching pigment, including rubbing and polishing and curing etc. complete at all levels. (Sample of stones shall be got approved by Client )(b) Item same as above in skirting, risers of steps, Ledge of pantry counter, toilet counter etc., on 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) with necessary groove, joints chamfer, all complete as drawings to be provided by the architect/as per instruction of site in charge.

(c) For making nosing (edge molding, half round/full round) in required shape treads of steps, Kitchen Counter etc.

P/f SS Curtain rods with necessary fixing arrangements, accessories, side mounts etc. All complete up to satisfaction of the architect.

Replacement of SS Wire mesh including fixing in the existing door/window and painting etc. complete as required.

Providing and fixing low/full height storage of following size storage: fabricated out of 19mm BWP commercial board in 1.0mm thick approved laminate from the outside and 0.8 mm laminate on the inside. All storages to have a backing of 12 mm thick MARINE PLY Providing and fixing in position Full Height/low ht. storage 600 mm-750 mm deep and upto ceiling height with shutters made of 19 mm. thick. Commercial ply & shelves made out of 19 mm commercial ply. The storage shall be finished externally with 1.0 mm thick laminate of approved shade and melamine polish with enamel/plastic base on inner surface as per specification with brass oxidised hinges, tower bolts, magnetic ball catchers, lock, handle (6”-12” SS handle), SS robe hook on inner sides of shutter and SS hanger rod etc. all to be hettich/haffele make complete in all respects as per drawing & instructions of Engineer, For BEDROOM WARDROBES.

Providing and applying of two coat of pre-approved Plastic acrylic emulsion paint to walls and partition including surface preparation with two coat of putty, primer and sanding all complete with necessary drying period for each coat. The final finished should be a uniform and neat finish to the satisfaction of Institute include for all height and surface.

Providing and Fixing CPVC/G.I. pipes (medium quality of Jindal/Tata make complete with CPVC galvanised iron fitting (UNIK) brand or all descriptions, such as tees, elbows, reducers, clamps. suspenders, unions, check nut bends etc., including cutting, threading, chasing and making good the walls, floors RCC work etc., and filling the same with cement concrete 1: 2: 4 (1 cement: 2coarse sand: 4graded stone aggregate 20mm nominal size) after embedding the pipes , including painting the pipes (with desired shade of 2 coats enamel paint over coat of primer, where pipes are exposed) and painting with 2 coats of anticorrosive bituministic paint including necessary excavation upto the required depth, in trenches and back filling, and covering the pipes with 75mm thick sand all around the pipes, complete, as per detailed specifications and P/F C.I. (R.I.F. ) pipes and Making necessary additions to existing CI and G.I pipe work including new work for G.I and C.I upto connection in all floors in one pantry and two water cooler pose basket (Approx. depth 100 mm), 1 no. Multipurpose basket (Approx. depth 150 mm), 2 no. Multipurpose basket (Approx. depth 250 mm) a) For ONE KITCHEN, Three TOILETS & three BASIN POINTS. b) Office toilets Three TOILETS

P/F Powder coated Square/Round C.P. Jali (Chilly make)125 mm on floor trap.

Providing and Fixing 15mm nominal bore C.P. brass Clarion CQT-CHR-23309 Kitchen Sink Mixer with Swinging Spout (Wall Mounted Model) along with Connecting Legs & Wall Flanges with deluxe head of approved make.

Providing and fixing Jaguar make Wall Hung Basin Size: 420x420x155mm Continental Series code - CNS-WHT-813 with Fixing Accessories, along with Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses of Clarion series C.P. CQT-CHR-23167B, including Jaguar Waste coupling code ALD-CHR-709, 32mm Size Half Thread with 80mm height equip a bottle trap of Jaguar make Allied range code ALD-CHR-769L300X190, 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange , one numbers angular stop cock with wall flange of Clarion series code - CQT-CHR-23059 including necessary C.P. brass steel tubes i.e. Providing and Fixing 30 cm long 15mm nominal bore C.P. copper connection pipe with C.P. unions)

Providing and fixing Solo (SLS-WHT-6851S220PP) Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm, S Trap- 220 mm with fittings and Unions etc., complete painting wherever required and cutting and making good the walls and floors: W.C. pan with white plastic seat and lid with all pipes in c.p brass etc. with necessary trap, including spray jet. (ALL COMPLETE OF JAGUAR MAKE) FOR TOILETS

P & F jaguar Toilet paper Holder Recessed Type (Stainless Steel) Code: AHS-CHR-1551 Toilet Roll Holder of Hotelier series with C.P. brass screws. FOR TOILETS

P & F Jaguar Code: ACN-CHR-1181S Towel Rack of Continental series Jaguar make complete with wall brackets fixed to PVC cleats with C.P. brass screws. Towel Rack 600mm Long with Lower Hangers, Stainless Steel FOR TOILETS

(a) P/F Swivel Mirror 630 X 445mm Rectangular Shape of Continental range code AKP-CHR-35795 6 mm thick float glass mirror. (TOILET MIRRORS)

(b) Providing and fixing of 03mm thick looking mirror of 6x2 feet on 3 mm water proofed ply and side frame complete as required.

(a) Providing & Fixing Jaguar make Aria range ARI-CHR-39041 TWO Way Bib Cock with Wall Flange C.P with cover caps etc. complete all fittings inclusive. FOR TOILETS

(b) Providing and fixing 15mm C.P brass 041 two-way bib tap code: OPP-CHR-15041PM (Opal Prime) with C.P brass threaded flange complete, including cutting and making good the walls wherever required. FOR TOILETS & KITCHEN

Providing and fixing fixed health faucet including 15mm dia flexible connection from angle valve to health faucet, complete as required.(jaguar make ALD-CHR-573)

P/F jaguar Overhead shower Code: OHS-CHR-1799 ø120mm Round Shape Multi Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, including long band and square arm 15 inches SS complete as required.

P/F jaguar Wall mixer arrangement only cruth Code: CON-CHR-217KN Continental bath fitting including all necessary fittings. FOR TOILETS

P/F Jaguar stainless steel soap dish of continental accessories Code: AKP-CHR-35731P Soap Dish Holder. FOR TOILETS & KITCHEN

Providing and fixing plasticized PVC connection pipe with brass unions : 45 mm length,15 mm nominal bore

Providing and fixing kitchen sink of Neelkanth make SINGLE BOWL Kitchen Sink with drain board with RS CI brackets under granite top, CP brass chain with rubber plugs 40mm C.P. brass waste and 40mm C.P. brass trap with necessary unions complete including painting and fitting, cutting and making good the walls wherever required: Stainless steel sink (AMC/Neelkanth/Nirali) overall size of 610 x 457 mm.

Providing and fixing CERA make Basin with counter Size: 450x350x150 mm Cat. No S2030102 with Fixing Accessories, along with Central Hole Basin tap of CERA make Cat. No F1005101 including CERA Waste coupling Cat. No F8050102, 32mm Size Half Thread with 80mm height equip a bottle trap of CERA make Cat No - F8060101, one numbers angular stop cock with wall flange of Cat No code –F8040205 including necessary C.P. brass steel tubes i.e. Providing and Fixing 30 cm long 15mm nominal bore connection pipe with unions)

Providing and fixing urinals with sensor having provision of AC/DC supply of Parryware make CO588 integrated urinal of size 430 x 420x 655 mm including partition complete in all respect including fixing arrangement etc.

Providing & Fixing CERA make Angle valve with Wall Flange Cat No.– F8040205 C.P with cover caps etc. complete all fittings inclusive. FOR TOILETS

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required (a) 3 x 1.5 Sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required3 x 4 Sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required 4 Module (125 mm x 75 mm)

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required 4 Module 6 Module (200 mm x 75 mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required 4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required 6 Module