National Institute Of Plant Genome Research Tender

Excavation in all kind soil/ordinary rock/Cement Concrete

Providing and laying cement concrete in , palteforms, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,blocks, anchor block.complete inclusive of shuttering cost and as per Instruction of Institute.

1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing vertical post(circular pipe) for shades of approved size by welding etc. to trussand MS frame work and similar works,including applying priming coat of approved steel primer all complete as per direction of Institute.

M.S.pipe

Steel work in builtup tubular trusses ( round,square or rectangular hollow tubes etc.) including cutting,hoisting fixing in position and wleded ,and bolted including special shaped washer etc.and applying priming coat of approved steel primer etc all complete as per direction ofInstitute.

Hot finished wlded type tube

Painting on Pipe, structural works etc. with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

New work (two or more coats)

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L'hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers completebut excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as specified.

2 mm thick flat

Providing & Fixing of MS Gate of frame size of Angle 50mmx50mmx6mm angle with 40mmx40mmx6mm angle and MS Sheet of 1.5mm thick(inside) and 50mmx6mm flat in middle with locking arrangment with a MS aldrop inside & out Side, Heavy Class Hinges as per drawing complete duly primer with steel primer and painted with synthetic enamle paint as per instruction of Institute. Size of Gate --7ft(w)x5ft(Ht)(In two panels)

PART - B

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 500 metres lead.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screwsat 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit withhelp of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mmand C carrier suspension clip and main carrier bracket at 1000 mmc/c. Inverted triangle shaped Spring Tee having height of 24 mm andwidth of 34 mm made of Gl steel 0.45 mm thick is then fixed to themain C carrier and in direction perpendicular to it at 600 mm centerswith help of suspension bracketspring T have to join, C carrier and spring T connectors have to beused. All sections to be galvanized @ 120 gms/sqm (both sideinclusive), fixing with clip in tiles into spring T with :

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25m height, made of G I sheet having galvanizing of 100gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.

Net Total Amount(PartA+PartB)