National Institute Of Plant Genome Research Tender

Modular Partitions :-Providing & Fixing of Aluminium partition with thickness is 60mm.Partition panel has an aluminium inner frame consisting of vertical upright & horizontal bracings.Upright is fabricated of 1.6mm thick aluminium . The thickness of this inner frame is 40mm.The upright section has slots for holding tiles which are snap fitted using special joinery. The brackets for supporting worktops. The horizontal bracings are made of 1.6mm aluminium .The uprights & bracings are joint together to form a rigid frame. Tiles are available in a variety of configurations and thickness of 9mm PIN UP Board with approved fabric and colour as well as one tile eraseble White writing board with writing PEN & Duster for each table. To provide the raceway with openable flap for passing electricity & data wires can be provided sparately at various levels-skirting level, just below the worktop or above the worktop(as per approved).The width of the raceway cover is 100mm and is made of 1.5mm aluminium section. The top cover and side covers are made of extruded aluminium sections of thickness 1.5mm the plastic caps are used to join the aluminium runners at various intersections. all parts are powder coated after elaborate 7 tank phosphating treatment process hence making it rust proof etc.as per desired colour all complete as per approved drawings and direction of Institute. ( Make of Boards:Merino,Associates, Green ply or equivalent make as approved by Institute)

Wooden top:-Providing & Fixing of worktop of 25mm thick both sided laminated pre-laminated partcle board with 2mm thick PVC edge banded. There is a wire/cable manager provided for passage of wires above the top. All complete as per drawing& instruction of Institute.

Gable Ends/Legs:- Providing & Fixing of 18mm thick both side laminated pre-laminated particle board(in approved colour) with 2mm thick PVC edge banded etc. All complete as per instruction of Institute..(Make Merino,Assiciates & Green ply))