Municipal Council Tender

Providing and laying 80 mm thick cement concrete Grass paver of grade M-40 under green technology, manufactured by automated block/paver making machine having compression and vibration both in sequence using multi cavity precision steel mould and automated curing chamber with waterless curing. The mixing of concrete must be done using a batching plant with proper measured quantities of raw material including cement mixed in automatic plant mixer to give uniform mixing and quality of concrete as per design mix. Manufactured in two layers, first the bottom layer must be filled and then the top layer should be filled as per BIS standard. The finished paver requires a rough finish on the top surface & is to be laid over a layer of coarse sand 30 mm thick and spreading of fine sand to fill up joints after laying of pavers and compacted with plate vibrator etc. complete as per the direction of Engineer-in-charge.

Relaying DQ stone flooring of size 100x100 mm and 70 - 80 mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:6 (1 cement : 6 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge.

Providing and fixing D.Q stone floring of avarage size 100x100mm and 70mm to 80mm thick hand cut laid over 20mm(average) thick base of cement mortar 1:6 (1 cement:6 coarse snad) of approved design/shape with joints and pointing with cement mortar 1:3( 1 cement :3 C/sand) all complete as per direction and entire satisfaction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) .

Disposal of building rubbish/malba/similar unserviceable, dismanteled or waste materials by mechanical means, including loading, transporting and unloading the same at any C&D Waste management site within 25 km lead i.e. Shastri park/Burari/Mundka including weighing at plant etc, complete as per direction of Engineer-in-charge. Weighing and unloading at the plant shall be as per procedure/rules of the plant management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C&D waste plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.