Municipal Council Tender

Supply of chair made of elliptical CRCA pipe of size 30x15mm bended in required U shaped for legs and L shaped (L & R) for sit and back jointed with two nos round pipe of dia 15mm slightly bend for proper spacing and support. The seat and back is made of virigin abs plastic as per IS: 9873 (Part-III) and sheet should have cushion with PU foam and with good quality fabric. The size of seat 400x460mm. The Height of seat 440-460mm, back height 770-800mm in required colour. All the CRCA tubes should be as per IS: 513, 1.5 mm thick, welding should be MIG welding and all steel structure should be epoxy polyester powedercoated of thickness 60-70 microns. The caps/shoes should be provided on all the open mouth of the pipe made of virgin plastic as per IS: 9873 (Part-III) etc. complete as per drawing and entire satisfaction of Engineer-in-charge.

Supply of chair with both side handles made of elliptical CRCA pipe of size 30x15mm bended in required U shaped for legs and L shaped (L & R) for sit and back jointed with two nos round pipe of dia 15mm slightly bend for proper spacing and support. The seat and back is made of virigin abs plastic as per IS: 9873 (Part-III) and sheet and arms should have cushion with PU form and with good quality fabric. The size of seat 400x460mm. The Height of seat 440-460mm, back height 770- 800mm in required colour. All the CRCA tubes should be as per IS: 513, 1.5 mm thick, welding should be MIG welding and all steel structure should be epoxy polyester powedercoated of thickness 60-70 microns. The caps/shoes should be provided on all the open mouth of the pipe made of virgin plastic as per IS: 9873 (Part-III) etc. complete as per drawing and entire satisfaction of Engineer-in-charge.

TEACHER TABLE -Providing, supplying and Placing of Teacher table of Overall Size - 1500mm(L) x 900mm(D) x 750mm(H). Consisting with 18 mm thick E-2 grade prelaminated board with high pressure 1mm laminate of merino/greenlam/century or equivlent on top and 0.8mm balancing laminate of same make with 2mm thick pvc edge bending. Table shall be provided with a open shelf of size 450mm(W) x 260mm(H) x and Open space for CPU/File of size 450mm x on left hand side. Keyboard Tray shall be provided in the centre of the table of size 550mm(W) x 300mm(D) and 60mm(H) facia of Keyboard shall be provided with Ball Slide. 3-Drawer Unit shall be provided on left hand side of the table of size 400mm(W) x 720mm(H) x 550mm(D). Hardware: Ball Metal Slide for Keyboard, Locking Bracket, Angle Clit, Screw, Knock Down Fitting, Wooden Dowel, PVC Inserts shall be of approved make . All the above items should be as per photo, sketch, specifications & direction of engineer-in-charge.