Municipal Council Tender

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in- Charge:

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge.The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @ 0.70 kg per sqm per coat

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 50 mm dia nominal bore

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 50 mm diameter pipe

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CIMake : Kirlosker/Crompton or equivalent. Capacity : 10 HP Three PhaseDischarge 35.5 LPSHead 14-27 Mtr Suction & Delivery 100x100mm.

Supplying installation, testing and commissioning of out door type control panel suitable for fountain equipment including wiring, cabling, cable tray control wiring etc. The control panel shall be compartalized for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color and shall be wall mounted with following, Common Electrical Panel for all fountains. Body Size: 900(W)X750(H)X300(D)(for run 10 HP Pumps - 2 nos. 1WORKING + 1 STBY) (a) Main Incomer 320-400A 4 Pole MCCB 63A- 1.00 no. (L&T/BCH/Havells make) (B) phase indicators-2set (L&T/Havells/BCH make) (c) 3 Pole MCB 32 Amps 2.00 nos. (L&T/Havells/BCH) (d) SP MCB 6 Amps 2.00 nos. (L&T/Havells/Indocopp make) (e) DP MCB 16 Amp 2.00 nos. (L&T/Havells/Indocopp make) (f) Single Phase Preventer 2.00 nos. (L&T/Havells/Minilec make) (g) Volt selector switch 1.00 no. (L&T/AE make) (h) Voltmeter 0-500 v 1.00 no. (L&T/AE make) (i) Ammeter 0-50 amps 2.00 nos. (L&T/AE make) (j) Overload relay 23-35 Amp. -2.00 nos (L&T/BCH/Havells make (k) TPN Power Contractors MNX-32.00 -6.00 nos. (L&T/BCH/Havells make) (l) Start/Stop Push Button assembly 2.00 sets (L&T/havells/BCH) (m) Star delta timer -2set (n)Auxiluary Contact Block 2NO +2NC - 2.00 nos. (L&T/havells/BCH/make) 0) Auxiluary Contact Block 1NC- 2.00 nos. (L&T/havells/BCH/make) (p)Digital time switch -2nos (L&T/havells/BCH/make) (q)Control wiring inside panel-1 complte set (r)MS panel stand -1 nos

Supplying and fixing of 25 mm dia. Gyeser/Bubbler Stream jet nozzle in ABS body as per design to produce water effect from 0.6-0.75 metre height of as per entire instruction, direction and satisfaction of Engineer-in charge. Make -The Fountainers/Premier World /Color Design India/Oase/Concept Design Technology/Water miracle/power wave

Supply & Fixing water proof LED lights 36nos. led'sx0.5 watts having in 18volt dc, color changing RGB made out of Saan top with ABS base body with protection class of IP-68. complete as per the direction & entire satisfaction of Engineer in charge. Make - The Fountainers/Premier World /Color Design India/Oase/Concept Design Technology/Water miracle/power wave

Supply and fixing of Power Supply/SMPS for LED Lights, Body - MetalInput Power - 220V ACOutput Power - 12V DC - 40 amp.Make : - The Fountainers/Premier World /Color Design India/Oase/Concept Design Technology/Water miracle/power wave complete as per the direction & entire satisfaction of Engineer in charge.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. Make - REX/Gemini Pipe/AKG/Duraline 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and Fixing of UPVC Ball Valve complete as per per the direction and entire satisfaction of Engineer in Charge. Make - Prince/Supreme/SFMC/ Astral 25mm (1") dia. Size

50mm (2") dia. Size

Supplying and Laying submersible flat/round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/National/Kalinga complete as per the direction & entire satisfaction of Engineer in charge. 3 core x 6.0 sq mm size

3/4 core x 2.5 sq mm size

Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables, make Kalinga/AKG/ISI Mark complete as per the direction & entire satisfaction of Engineer in charge. 25 mm dia. Size

Supplying and Making water Proof joint of underwater cables for submersible cable complete as per direction, instruction and entire satisfaction of Engineer-in-charge.

Supplying and Fixing of UPVC pipes (10 Kg/cm2) of make Prince/Supreme/Prakash or equivalent confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge 63 mm OD Pipe

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore :Horizontal

Providing and fixing of Stainless Steel 304grade Sump Cover/grating /bench frame made of angle/ Hollow tubes,/channels/ plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing grating/sump cover with necessary stainless steel dash fasteners , stainless steel bolts etc., of required size etc complete as per direction and entire satisfaction of Engineer-in-charge

Providing and fixing of Stainless Steel 304grade perforated Sump Cove made of 2mm thick SS perforated wire mesh to avoid leaves etc complete including cutting/fixing/welding complete as per direction, instruction and entire satisfaction of Engineer-in-charge.

Supply of DCC Master Control Device for LED Lights having Specifications:- * PIC based controller with master & slave communication protocol. * Push feature to lock any running colour chase to a fix colour. * 24 Pre Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body - Plastic/PVC, Output Power - 12V to 18V DC, Make - The Fountainers/Premier World /Color Design India/Oase/Concept Design Technology/Water miracle/power wave.

Supply and fixing of 100 mm dia. & 1000mm long GI Manifold to Connected Main Delivery pipes to Pump as per direction, instruction and entire satisfaction of Engineer-in-charge. Make -The Fountainers/Premier World /Color Design India/Oase/Concept Design Technology/Water miracle/power wave

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for Single Phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : SS,copper , Make : Kirlosker/Crompton or equivalent, Capacity : 1 HP Single Phase, Discharge 147 -18 LPM, Head 16 -32mtr., Suction & Delivery 25x25mm

Disposal of building rubbish / malba/silt / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting and unloading the same at any C&D waste management site within 25kms. lead i.e. Shastri Park/Burari/Mundka including weighting at plant etc. complete as per direction of Engineer-in-charge. weighing and unloading at the plant shall be as per procedures/rules of plant management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C&D waste plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursement by the department on production of only original cash receipts.

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with white oval natural river pebbles as per drawing, all complete as per direction of Engineer-in-charge.

Providing and fixing 100 mm thick fine dressed red sandstone slab 1.5m long,0.45m breath with corners moulding over gabion wall with the help of fastner and screws etc complete as per direction & entire satisfaction of engineer in charge

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore each

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kind of soil

Supplying and stacking at site.Moorum

Spreading and Filling available moorum including watering , rolling and preparation of surface having thickness 50mm or required as per site condition as per direction of Engineer-in-charge. (The cost of material shall be paid separately).

Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.

Supplying installation testing and commissioning of horizontal monoblock Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply . Motor Body : CI Pump Body : CIMake : Kirlosker/Crompton or equivalent. Capacity : 15 HP Three Phase Discharge 13.2-6.5 LPS Head 28-68 Mtr etc complete as per direction, instruction and entire satisfaction of Engineer-in-charge

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Conidtion:- 7.45 MT cement in bags arranged by the contractor himself and nothing extra shall be paid.