Municipal Council Tender

Providing & fixing of LPS Series Pop up spray head having variable arc nozzle capable of covering 1.2-5.5 m at 1.4-3.5 Bars with a discharge rate of 0.04 lps to 0.24 Lps, inlet size 1/2".The overall pop-up height shall be 4 inch. The Spray Head body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic. make K-Rain (USA) / HIT (USA) / Rain(Italy) or equvalent,, It shall have a heavy-duty stainless steel retract spring for easy alignment of the pattern. The spray head shall have a soft elastomer pressure-activated co- molded wiper seal for cleaning debris from the pop-up stem as it retracts into the case to prevent the spray head from sticking up to minimize "flow-by." The spray head shall have a Flush Plug pre-installed. The plug shall prevent debris from clogging the spray head during installation and allow for the system to be flushed before nozzling. The plug shall be bright orange in color and constructed of polypropylene material. complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3/4 or 1/2" Pop up Connecting Assembly. The tubing shall be made of polyetylene having wall thickness of 2.5mm ,maximum working pressure of upto 8.3 bar. The fittings shall be made of UV resistant thermo plastic. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of PP/PVC Saddle tee. The body of saddle is made of Vergin polypropylene in master batch UV stabilized ,reinforcement O- rings, galvanized nut & bolts and parallel female thread (Pressure tight). make Supreme(Italy) or equivalent, complete as per direction and entire satisfaction of engineering in charge. P.P.Saddle Tee50mm ,40 X 1/2''

Providing & fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve. make Harit (India) / Aqua (India) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge. 2" Size PVC Ball Valve

Providing & fixing of a double acting Air release valve 2" made of high strength aluminium / plastic with fibre glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 6 Bars and tesing pressure shall be 10 Bars.- make Harit/Jain (India) or equivalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 12" Rectangular valve box with cover for main line and lateral line Valve. The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top. make K-Rain (USA) / HIT (USA) / Rain(Italy) or equivalent - complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pressure Guage (glycerine filled) having 2" Dial, thread Size: 1/4" BSP Male, Standard Version - make Harit (India) / Aqua (India) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Disc filter (120 mesh) 50m3 /hr having an inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" ,a helix made of fiber glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars..make Harit (India) / Aqua (India) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Hydropneumatic type Pumping Unit having total discharge 5 HP capable of discharging 3 lps at 45 mtr head with Base Frame, DOL starter, Header Unit, Foot Valve, Suction pipe etc complete. make ATE(Teraflow)/Lubi/Eq./KSB or equvalent, complete as per direction and entire satisfaction of engineering in charge.

2'' Delivery & Header pipe, fittings & accessories, with Non Return Valve, Isolation Butterfly Valve, Pressure Guage, pressure transducer & Water Level Controller Complete.. make Harit (India) / Aqua (India) / Rain(Italy) or Equivalent , complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing 2" BSP Straight flow 3 way Solenoid valve with victaulic grooved coupling flow control and "pressure regulation unit" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. make Hydromat (India) / Aqua (India) / Rain(Italy)or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pro C multiple wire controller of 6 stations having feather Patented Full Program Display – One screen shows watering days, number of start times, number of stations and special programming. Short Circuit Protection – Identifies and isolates stations with short circuit while remaining program continues. Station Delay/Overlap Programming – Permits additional time between stations or dual operation for issues like well recovery, slow closing valves and water hammer. AM/PM or 24 Hour Clock Settings – Allows user to choose the time format desired. System Test – Allows a full system check for valve operation. Manual Start – Allows manual program operation at the push of a button. Locate Feature – Aids in locating buried valves in field. Sensor Bypass Switch – Global override of active sensor for all stations. Master Valve/Pump Start Ready – Programming for individual station(s) operation as needed. Dedicated Sensor Terminals – Enables direct sensor installation for maximum watering control. Default Programming – Allows program to be saved and recalled without having to reprogram. Permanent Day Off – Set any day of the week, regardless of programming, as a non-watering day. Seasonal Adjust – Quick, easy global adjustment of watering times from 10-200% conserves water. make K- Rain (USA) / HIT (USA) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of DBR/Y Water Proof Wire Connector The 3M™ Direct Bury Splice Kit DBR/Y is used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct burial. The kit includes a 3M™ Performance Plus Wire Connector R/Y+ and a high impact, UV- resistant polypropylene tube prefilled with moisture- resistant grease. Maximum Voltage Rating:600 V Application Temperature:32°F to 120°F (0°C to 49°C) Operating Temperature: -40°F to 221°F (-40°C to 105°C), Tube :Impact and UV Resistant Light Blue Polypropylene. make Harit (India) / HIT (USA) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 1.5 sqmm Single Core Copper Conductor Flexible Wire. make Macrotherm (India) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and Spreading 25 mm thick moorum, watering and rolling complete including preparation of the surface and rolling. With road roller/ hand roller

Supplying and Spreading 90 mm thick Good Earth watering and rolling complete including preparation of the surface and rolling. With road roller/ hand roller.

Providing and fixing DQ stone of size 200mm X 200mm X 200mm in foundation and plinth in with cement mortar 1:4 (1 Cement : 4 Coarse Sand ) including deep ruled pointing all complete as per dierction and satisfaction of Engineer-in-charge.