Municipal Council Tender

Supplying and laying of ISI marked PVC insulated, sheathed, armoured, copper conductor of size 2.5 sq.mm/4 C control cable for working voltage upto 1.1 KV in recess/ on surface/ in G.I. pipe/cable trays etc from Battery Tripping Unit to HT panel complete in all respect as per site requirement. Make:Plaza/Havells/Finolex/RR Cable/KEI/Polycab

Providing and Fixing of synthetic insulating mat 2.5 mm thickness and 1 Mtr width suitable for 11 KV HT Panel board ISI marked having di-electric strenght 45 KV, confirming to IS 15625:2006, complete in all respect as per site requirement.

Providing and Fixing of Meter Box for 3 phase energy meter of size 600mm (H) X 300 mm (W) X 300 mm (D) fabricated from 1.6 mm MS sheet duly powder coated including providing & fixing bakelite sheet of size 500mm (H ) X 300mm (W) X 5mm (thick ) with locking arrangement, complete in all respect as per site requirement.

Supplying and Fixing Fire Extinguisher CO2 (4.5 Kg) complete in all respect as per site requirement.

Supplying and Fixing Fire Bucket complete in all respect as per site requirement.

Supplying and Fixing of First Aid Box complete in all respect as per site requirement.

Supplying & fixing of ESS name plate (2 feet x 2.5 feet) complete in all respect as per site requirement.

Supplying and Fixing of First Aid Chart complete in all respect as per site requirement.

Providing and Fixing 25mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required.[ 2 runs of strip ]

Providing & Fixing of 25 mm x 5 mm G.I. Strip in 40mm GI Pipe from earth electrode including connection with brass, nut, bolt, spring washer excavation and refilling as required, complete in all respect as per site requirement.

Providing conductive concrete earth grid of 2 Nos. interconnected earth electrodes with installation & Testing connection including connection with application-Normal Soil earthing to deliver earth results not exceeding 2 Ohms for sub station equipment i.e HT Panel Board SPECIFICATIONS a) Earth Electrodes :- Metal Electrode Cu-Bonded MS road Size : Dia 60mm (+-0.5mm), Length - 3 Mtrs with enhanced conductive concrete embedding size dia :100mm Length 3 Mtr. of each earth electrode b) Interconnecting strip :-All the 2 Electrodes of the grid will be horizontally inter-connected with metal conductor : Cu Bonded MS Flat size 50mm X 6 mm & enhanced conductive concrete embedding size 75sqmm buried at 600mm below the ground level c) Test Links :- Test Links Cu-Bonded MS Flat of size : 50mm X 6mm shall be provided , one no. at any of the two electrodes for the grid for the connection between earth grid pit and the application d) Pit Covers :- RCC Pit Cover frame at size 300mm X 300mm shall be provided at two earth electrodes

Dismantling of HT Panels and cartage the same at store in NDMC Area

SITC of 11 KV Indoor epoxy resin casted CT single wound for protection/metering CT ratio (as per load requirement) class Metering Core 0.5 & Protection 5P10 VA burden 15, short time current 18.4 KA/1 sec insulation level 12/18/75 KVP as per ISS 2705/1992 for 11 KV HT panel. as per specifications attached MAKE : AE/Kappa/Areva/Crompton/Savio/Hans

Supplying and installing of size 150 mm width X 50 mm depth X 1.6 mm thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as per site requirement

Supplying & installation of MS Angle Iron of size 100mm (Width) X 100mm (Depth ) X 6 MM thickness for supporting the HT Panels over and above the Duct/trench as per the site requirement

Supplying and making of H.S. type indoor end termination kits suitable for H.T. XLPE 11 KV cable of following size-400sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type indoor end termination kits suitable for H.T. XLPE 11 KV cable of following size-300sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type indoor end termination kits suitable for H.T. XLPE 11 KV cable of following size- 150sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type indoor end termination kits suitable for H.T. XLPE 11 KV cable of following size- 70sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type st. Th. Joint Boxes suitable for H.T. XLPE 11 KV cable of following size-400sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type st. Th. Joint Boxes suitable for H.T. XLPE 11 KV cable of following size-300sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type st. Th. Joint Boxes suitable for H.T. XLPE 11 KV cable of following size-150sqmm/3C MAKE : 3M/Raychem/Cabseal

Supplying and making of H.S. type st. Th. Joint Boxes suitable for H.T. XLPE 11 KV cable of following size- 70sqmm/3C MAKE : 3M/Raychem/Cabseal

Making of Temporary jointing of 11 KV HT Cables of various sizes for run through of supply as per the site requirement

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.