Municipal Council Tender

Dismantling of C&R Panels including disconnection of existing cables , earthing etc. & as per the site requirement [ ESS West Bengal Guest House -3 Nos. ]

Cartage, Loading , unloading including dragging and positioning of 11KV Panels and C&R Panels from ESS to NDMC store/site as per site requirement

Dismantling of existing LT ACB Two Tier Panels including disconnection of existing cabels,Bus Ducting ,coupling , earthing etc. as per the site requirement

Cartage, Loading , unloading including dragging and positioning of LT ACB Two Tier Panels ESS Tamilnadu House to ESS Bardoloi Marg as per site requirement

Dismantling and cartage of old existing Battery Tripping Unit from existing ESS Tamilnadu House to NDMC store as per site requirement

Handling/Dismantling of 11KV & 1.1KV Cables of different sizes which are not laid in ground but part of it going up to panel or part in the building

Drawing/Dismantling of 11KV & 1.1KV Cables of different sizes in RCC Pipe/HDPE Pipe/Duct/

Dismantling & Cartage of Bus Ducting from Existing electric Sub-Station Tamilnadhu House to ESS Bardaloi Marg as per Site requirement

Installation, Testing and Commissioning of 11 KV HT VCB Panel complete in all respect as per site requirement

Installation, Testing and Commissioning of LT ACB Two Tier Panels complete in all respect as per site requirement

Installation , Testing and commissioning of 1600 KVA dry Type Transformer including connection of 11KV Cables, LT Cables/Bus Ducting etc as per site requirement

SITC of Battery Charger Unit along with MF batteries of rating 220V AC (Input) & output of DC 24V to 36V suitable for HT Panel, 100 AH as per specifications, complete in all respect as per site requirement.

Installation and commissioning of LT Bus trucking including bus ducting (02 Nos. of Aluminimum Bus Bars for each phase and 01 No. for neutral ) , nut bolts, washers complete in all respect as per the site requirement

Modification , Installation and commissioning of LT Bus trucking including bus ducting (02 Nos. of Aluminimum Bus Bars for each phase and 01 No. for neutral ) , nut bolts, washers complete in all respect as per the site requirement

Supplying, Installation, Including suspension, testing and commissioning of bus ducting for 2500Amps. for 415 Volts AC 50Hz rating Capacity bu strunking with aluminium bus bars having current density of 130A/ sq cm at nominal current rating in 1.6mm thick IP 42 sheet steel enclosure in convenient sections for use on 3 Phase, 4 wire , 415 Volt , 50 HZ AC supply including jointing of sections, flexible joints , expansion joints , bends and earthing with 2 runs of galvanized iron strips , suspenders , angle iron bracket , steel fasteners connecting to earthing systems etc as required.

Repairing & Servicing of 11KV VCB and Panel , there operational mechanism, cleaning, oiling, alignment of breakers in panels, providing minor wiring of relays, indicating lamps, selector switches, push buttons, cleaning of carbon from bus bars and providing insulating coating with antioxidant treatment on 11KV bus bars chambers, cleaning of CT's Chamber, PT's Connections, making panel in working conditions as per the site requirement

Repairing & Servicing of LT 2 Tier Panels , cleaning of bus bars with sleeving including replacement of indication LED lamps & minor parts etc and servicing of LT ACB's including testing, providing minor parts as per the site requirement I making panel for smooth operation.

Supplying and making indoor end termination with heat shrinkable jointing kit complete with all accessories including lugs for 150sqmm/3C , XLPE aluminimum Conductor Cable of 11KV Grade Make : 3M/Raychem/Cabseal

Providing Maintenance free & water less earth grid to deliver earth result not exceeded more than 2 ohms for substations equipment i.e. distribution transformer body, neutral and HT Panel, LT Panel Board by providing & fixing copper bonded MS earth electrodes of appropriate size and length in convenient pieces and embedded vertically in ground after making a bore of appropriate diameter and filling the bore with an earth enhancing compound. Interconnecting the multiple earth electrodes with 50 X 6mm copper bonded MS strip below 500mm surface level. Filling the surrounding of bore with fresh soil complete in all respect including connecting test link at two places and providing masonry enclosure with RCC frame & cover. Two connections point with test link from earth electrode shall be taken up to surface level for connecting conductor to the equipment. All Earthing connections should be exothermically welded. [Transformer Body-2, Transformer Star Point-2, 11KV Panel-2, LT Panel-2 ]

Providing & Fixing of 25 mm x 5 mm G.I. Strip in 40mm GI Pipe from earth electrode including connection with brass, nut, bolt, spring washer excavation and refilling as required, complete in all respect as per site requirement.

Providing and Fixing 25mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required.

Supplying and laying of ISI marked PVC insulated, sheathed, armoured, copper conductor of size 2.5 sq.mm/4 C control cable for working voltage up to 1.1 KV in recess/ on surface/ in G.I. pipe/cable trays etc from Battery Tripping Unit to HT panel complete in all respect as per site requirement. Make: Plaza/Havells/Finolex/RR Cable/KEI/Polycab

Supplying and laying of ISI marked PVC insulated, sheathed, armoured, copper conductor of size 2.5 sq.mm/10 C control cable for working voltage up to 1.1 KV in recess/ on surface/ in G.I. pipe/cable trays etc from HT Panel to Transformers for the connections of WTI , Bucheloz Relay etc complete in respect as per site requirement. Make:Plaza/Havells/Finolex/RR Cable/KEI/Polycab

Providing and Fixing of synthetic insulating mat 2.5 mm thickness and 1 Mtr width suitable for 11 KV HT Panel board ISI marked having di-electric strength 45 KV, confirming to IS 15625:2006, complete in all respect as per site requirement.

Providing and Fixing of Meter Box for 3 phase energy meter along with Test Terminal Block (TTB) of suitable size fabricated from 1.6 mm MS sheet duly powder coated including P/F Bakelite sheet of suitable size with locking arrangement, complete in all respect as per site requirement.

Supplying and Fixing Fire Extinguisher CO2 (4.5 Kg) complete in all respect as per site requirement.

Supplying and Fixing Fire Bucket complete in all respect as per site requirement.

Supplying and Fixing of First Aid Box complete in all respect as per site requirement.

Supplying & fixing of ESS name plate (2 feet x 2.5 feet) complete in all respect as per site requirement.

Supply & fixing of Caution Boards as per site requirements

Supply & fixing of cable Boots suitable for 11KV Cable of size 400sqmm for each phase as per site requirement Make: 3M/Raychem/Cabseal/ABB/Seimens

SITC of 11 KV Indoor epoxy resin casted CT single wound for metering CT (as per actual load) class 0.5p10 VA burden 5, short time current 18.4 KA/1 sec insulation level 12/18/75 KVP as per ISS 2705/1992 for 11 KV HT panel. (03 Nos. in One Set), complete in all respect as per site requirement. MAKE : AE/Kappa/Areva/Crompton/Savio/Hans