Municipal Council Tender

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1;3 ( 1 cement ; 3 coarse sand ) including making joints with or wihtout grooves ( thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment). (Precast C.C Kerb stone shall be approved by Engineer-in-charge).

Providing and laying design mix cement concrete of M-10 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand Fly ash and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, by groove cutting machine, complete all as per direction of Engineer-in-charge Note:-Minimum cement content to be used this item is @ 150 kg/cum. Excess cement used as per design mix shall not be payable.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand Fly ash and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, laying at site, spreading and compacting mechanically by using needle vibrators, levelling to required slope/ camber, finishing with required texture, complete all as per direction of Engineer-in-charge Note:-Minimum Cement contentto be used this item is @ 340 kg/cum. Excess cement used as per design mix shall not be payble . Cement concrete prepared with batch mixing machine Fly ash conforming grade of IS. 3812 (Part-1) only be used as Par replacement of OPC

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading the same at any C&D waste management site within 25 Kms. Lead i.e. Shastri Park/ Burari/ Mundka including weighting at plant etc. complete as per direction of Engineer-In-Charge . Weighting and unloading at the plant shall be as per procedures / rules of the C&D Waste plant . The processing fee of C&D management at prescribed rats will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts and as per direction and entire satisfaction of engineer-in-charge

Providing and fixing stainless steel pipe (304 Grade) for post of 65mm dia and 2.00 m high with 3 nos. stainless steel hooks & base plate of size 150X150 mm x 8mm in each post with pipe cap, including cutting, welding and all complete as per direction and entire satisfaction of Engineer -in -charge.

Providing and laying 8 layer synthetic acrylic cushion coating for badminton court with ITF classified material "Refkim" or equivalent , system consisting of : 8 layers System Synthetic Acrylic for Synthetic Court:- · (1 Layer) Concrete Primer · (2 Layer) Acrylic Resurfacer · (3 Layer) Cushion · (2 Layer) Top Coat · White Line Marking All the above as per games standard by ITF. The product use must be clasified by ITF (International Tennis Federation) complete in all respect and as per the direction and entire satisfaction of Engineer‐in‐charge.

Providing and fixing MS informatory sign board of size 1530 mm X910 mm and 2.20 m high made of MS 40 mm squre pipe 3 mm thick frameof size 1350X910 fixed with MS rectangular Sheet of size 1270 mm x 830 mm x 3mm thick and further fixed with two no post of 40 mm squre pipe 3 mm thick 2.20 m high with the help of 4 nos 40 mm square pipe of size 50 mm long including base -plate of size 150x150x8 mm thick by welding. Front side of the sheet shall be covered with high intesity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination inculding subject matter message (Bi-lingual) symbol and border etc as per IRC code 67:2001 pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure and complete in all respect as per direction and instruction of Engineer-in-Charge.

Providing and fixing badminton net of standard size 6.1 m x0.76 m with existing post for badminton Court etc Complete as per given dimension and direction of Engineer -in -charge. NOTE: 0.40 MT Cement to be arrange by the agency himself