Municipal Council Tender

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge.

Supply and fixing of Glass Fiber Reinforced Concrete (G.F.R.C) GFRC railling in approved size, pattern, design, thickness and colour of M/S Terra Firma, Netco, Ultra or eqivalant make of required size(150cmx110cm) and their of size 1.5' to 2'. The GRC element should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘Saint Gobain OCV , Neg Japan, Super Plasticizers manufactured by ‘BASF’ , Nerolac Perma, Polymers manufactured by ‘BASF’, Nerolac Perma and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’. The material casting should take place in FRP Mould manufactured by ‘Reckli’ or equivalent. The fixing of GFRC Element work with Dry Fixing method using fasteners, pins, nails, Screw, nuts, bolts including necessary hardware etc in Building Facade complete as per directed by Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading the same at any C&D waste management site within 25 Kms. Lead i.e. Shastri Park/ Burari/ Mundka including weighting at plant etc. complete as per direction of Engineer-In-Charge . Weighting and unloading at the plant shall be as per procedures / rules of the C&D Waste plant . The processing fee of C&D management at prescribed rats will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts and as per direction and entire satisfaction of engineer-in-charge

Supply of Rectangular Precast slab/Drain Cover of Glass Fiber Reinforced Concrete (G.F.R.C) GFRC Elements in approved size, pattern, design, thickness and colour of M/S Terra Firma, Netco, Ultra or eqivalant make of required size (2.5'x1.5' ) . The GRC element should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’, Resistant Glass Fiber manufactured by ‘Saint Gobain OCV ,The material casting should take place in FRP Mould manufactured by ‘Reckli’ or equivalent. The fixing of GFRC Element work with Dry Fixing method using fasteners, pins, nails, Screw, nuts, bolts including necessary hardware etc in Building Facade complete as per directed by Engineer-in-Charge.

Providing and fixing Stainless Steel HEAVY DRILL TENCH: including the bottom rail and the top grille, the bottom channel is made of SMC resin material, which is durable and breaks, and the top grille is made of stainless steel. Durability performance ensures a permanent collection and spread of standing water.Single hole / storm dual hole system Low profile drain cover "U" design channel and stainless steel grille Ideal for areas that require drainage and channeling of water fits the drain at the bottom of the driveway/sidewalk Specifications: 1. Material: SMC resin + stainless steel 2. Color: gray 3.Size:Customizable 4 Size: 23.6×4×2.4" (60×10×6cm) 5 Length: 60cm 6 Width: 10cm 7. Height: 6cm and as required as per direction oc engineer in charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer- in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm

Laying of gang saw cut 30 mm thick, polished/rectified granite of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling stone slab, CC/RCC Slab/ DQ Stone flooring laid in cement mortar including removal of mortar, stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying DQ stone flooring of size 100x100 mm and 70 - 80 mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:4 (1 cement : 4 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:4 (1 cement : 4 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge.

Precasting and placing in position 150 mm dia. outdoor RCC Bollards 800mm high with base plate of required shape including embedded 150mm in cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying premium glazed anti skid multi colour 80mm thick precast cement concrete glazed glass moulded and corner chamfered interlocking pavers block of M-40 grade having glazed minimum 10mm thick of approved make ,shape /design and laid in desired pattern and colour over a bed of 50mm thick course sand including cutting pavers block as per requirement at site. The joint filled with fine sand etc complete as per direction of Engineer-in-charge.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete : Wedge expansion type Fastener with threaded dia 12 mm.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Credit of disposal of Material. (1) M.S steel