Municipal Corporation Tender

4.1.3:Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.1.1:Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

4.3.1:Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

4.3.3:Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.200 mm width X 50 mm depth X 1.6 mm thickness

9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

5.3:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

1.1.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.7.2:Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire

1.7.3:Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2x4 sq.mm + 1x4 sq.mm earth wire

1.22.3:Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.150 mm X 75 mm X 60 mm deep

1.22.5:Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.180 mm X 100 mm X 60 mm deep

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.1:Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3:Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

19.1:Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

1.50.1:Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

7.7.1:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.7.2:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

DSR Civil

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Approved rates electrical

122.1.3:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*10 sqmm

122.1.19:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*70 sqmm

122.1.20:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*95 sqmm

122.1.47:Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required.

122.2.2: P/F Hot press sheet moulded compound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof pole box of inner dimension 200x160x98mm (NS) complete with suitable arrangement for fixing of 2 nos of 6 to 32 amp single pole MCB & 63 Amp. Double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc as reqd. as reqd.

122.2.4:SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eluotropic grade Aluminium bus bar of size 25mm x 19 mm mounted on galvanized M. S. body power quoted pilferage proof SMC door duly welded with S.S. with rain cover size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shode proof SMC sheet of 3 mm as required.

122.2.29:SITC of 100W LED Flood Light luminiare fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =100 watt +/- 5% (b) Luminaire Efficacy=100 Lm/w (c) Power Factor=0.95 (d) Protection Class- IP-66

122.2.39:S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt =95 (c)Power Factor =0.95

OD30305/2023-2024:Supply of 16 sq mm ISI marked FRLS PVC insulated, single core copper conductor cable

Approved rates E&M

OD30306/2023-2024:Supply installation testing and commissioning of Electrical Horizontal centrifugal pump set with non-clog / mf impeller to handle storm/mixed/sewage water with having min. discharge of 800 M³/ Hour at head min 7 mtr, RPM 750 having suction and delivery size 350 mm or 300 mm dia, mounted on a common base frame coupled with min 40 HP or suitable rating(IE-2) three phase , TEFC AC , 415 volts , 50 HZ supply electrical motor energy efficient complete as required.Mounted on a common base frame as Casing CI , Impeller CI,Shaft & sleeve (SS) 40 C 8 complete with coupling guard and foundation bolts etc. as reqd.

OD30307/2023-2024:P & F/Replacement of M.S Black pipe (9.5 mm thickness) Conforming to IS:3589 with required nut bolts and packing sheet etc complete as reqd of following dia 400 mm ,9.5 mm thickness

OD30308/2023-2024:P & F/Replacement of M.S Black pipe (9.5 mm thickness) Conforming to IS:3589 with required nut bolts and packing sheet etc complete as reqd of following dia 350 mm ,9.5 mm thickness

OD30309/2023-2024:P & F/Replacement of M.S Black pipe (9.5 mm thickness) Conforming to IS:3589 with required nut bolts and packing sheet etc complete as reqd of following dia 300 mm ,9.5 mm thickness

OD30310/2023-2024:Providing & Fixing of M.S Flange with required nut bolts and packing sheet etc complete as required of following dia. 400 mm ( 25 mm thickness)

OD30311/2023-2024:Providing & Fixing of M.S Flange with required nut bolts and packing sheet etc complete as required of following dia. 350 mm ( 25 mm thickness)

OD30312/2023-2024:Providing & Fixing of M.S Flange with required nut bolts and packing sheet etc complete as required of following dia. 300 mm ( 25 mm thickness)

OD30313/2023-2024:Providing & Fixing of M.S Blind Flange with required nut bolts and packing sheet etc complete as required of following dia. 400 mm ( 25 mm thickness)

OD30314/2023-2024:Providing & Fixing of M.S Bend with required nut bolts and packing sheet etc complete as required of following dia. 400 mm(10 mm thick),length 0.75 m

OD30315/2023-2024:Providing & Fixing of M.S Bend with required nut bolts and packing sheet etc complete as required of following dia. 350mm(8 mm thick),length 0.75 m

OD30316/2023-2024:Providing & Fixing of M.S Bend with required nut bolts and packing sheet etc complete as required of following dia. 300 mm(08 mm thick),length 0.75 m

OD30317/2023-2024:Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312(Part 1 & 2), PN 1.6 complete as required NRV 350 MM

OD30318/2023-2024:Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312(Part 1 & 2), PN 1.6 complete as required NRV 150 MM

OD30319/2023-2024:Replacement of Non Rising Spindle Sluice Valve of CI Body with Wedge, Bronze ring confirming to IS 14846 & SS IS:6603 (ISI Marked), PN 1.6 complete as required: SV 350 MM

OD30320/2023-2024:Rubber Sheet 10 mm thick

OD30321/2023-2024:Mounting pad(AVM)

OD30323/2023-2024:Providing & Fixing of MS Bar Screen made out of MS channel size 4" x 2" (100 mm x 50 mm) and center covered with MS Flat size 80 x 8 mm duly welded with center to center distance 40 mm and back side supporting channel (100 x 50 mm)duly welded .Work also includes complete bar screen fixing in the drain with the help of heavy crane and complete bar screen duly painted with enamel paint. Bar screen duly fixed in side wall using mortar , tools and tackles. (sq feet)

OD30324/2023-2024:S/I/T/C of fully automatic Auto Transformer Starter will be made out / fabricated with 2 mm thick, MS sheet steel ,dust & vermin proof, darn & drip-proof , front operated , self supported, free standing type constructions and will be duly spray painted Sythetic Enamel of light grey shade 631 of IS:5 and accomodate all switch gear items required to meet the technical requirements of ATS 50 HP & Adequate rating Oil immersed Auto Transformer having Copper winding , class 'E' insulation with taping 50%,65%&80%(01 No.)Adequate rating power contactors , Overload relay, Single Phase preventer relay with under voltage & over voltage or as suitable(01 No), Flush mounting type ammeter 96 sqmm with selector switch suitable CT connection (01 No), Voltmeter 96 sqmm with selector switch (01 No), Indicating lamp for ON,OFF,TRIP(03 Nos),Indicating lamp for R,Y,B (03 Nos) without transformer's oil as follows: (1) Switch fuse unit 125 A TPN with handle FN 125 A-1 No.(2) HRC fuse 125 A-3 Nos (3) Star contactor coil voltage 240AC with 2 No +2NC AUX. contacts Block MNX 50- 1No.(4)TAP contactor coil voltage 240AC with 2 No +2NC AUX. contacts Block MNX 50- 1No.(5)Line contactor coil voltage 240AC with 2 No +2NC AUX. contacts Block MNX 50- 1No.(6) Over load relay range -A CT operated 45-75 A MN5-01 No(7) Current Transformer 15 VA , CL. 1 for Metering 100//5A-3 No.(8) Push button start/stop element 22.5 mm dia -2 Nos(9) Indicating lamps 230V AC Red LED Type -3 No(10) MCB 6A 1P MCB , 10 KA -1 No.(11) On Delay Timer 0-30 Sec , Coil voltage 240 V , AC 2AODTS-3 Nos(12) Ammeter ,0-100/5a,(100-600A) Sappress Scale 6-Time,96 Sq. mm with Ameter Selector switch 0-100/5A-1 No . (13) Voltmeter 0-500 V ,96 SQMM size with voltage selector S96-1 No.(14) Single Phase preventer relay with under voltage S2VMR2 1 No

OD828/2024-2025:SITC of Pump- Non clog sewage solid handling - Suc/Del size 150 mm x 150 mm head 15 mtr & discharge 400 m3/hr , Body-CI, Impeller -SS, Shaft- EN-8, Sleeve-SS with coupling, base frame, fuel tank & leads coupled with 38 BHP diesel engine,1500 RPM , Self start, water cooled with radiator complete with 12 V battery as required

OD829/2024-2025:SITC of 4 pole 320 Amp oFF load side handle change over switch conforming to IS: 13947 (Part I & III) in sheet steel enclosure i/c connection etc. complete as required.